| 1855 - 1860 |
Modification of lignin-polyethylene blends with high lignin content using ethylene-vinylacetate copolymer as modifier
Alexy P, Kosikova B, Crkonova G, Gregorova A, Martis P |
| 1861 - 1868 |
Crystalline structure and mechanical properties of wet-spun dibutyrylchitin fibers and products of their alkaline treatment
Wlochowicz A, Szosland L, Binias D, Szumilewicz J |
| 1869 - 1876 |
Studies on poly(acrylic acid)/attapulgite superabsorbent composites. II. Swelling behaviors of superabsorbent composites in saline solutions and hydrophilic solvent-water mixtures
An L, Wang AQ, Chen JM |
| 1877 - 1884 |
Glucose oxidase electrodes of poly(o-anisidine), poly(o-toluidine), and their copolymer as biosensors: A comparative study
Borole DD, Kapadi UR, Mahulikar PP, Hundiwale DG |
| 1885 - 1890 |
Mechanical and thermal properties of glass bead-filled nylon-6
Li H, Qiang Y, Wei J, An LJ, Jiang SX, Li RKY |
| 1891 - 1897 |
Preparation and characterization of poly(methyl methacrylate) grafted sago starch using potassium persulfate as redox initiator
Qudsieh IYM, Fakhru'l-Razi A, Muyibi SA, Ahmad MB, Rahman MZA, Yunus WMZW |
| 1898 - 1904 |
Emulsifier-free emulsion polymerization of styrene
Sharifi-Sanjani N, Soltan-Dehghan M, Naderi N, Ranji A |
| 1905 - 1911 |
Particle features of a poly(methyl methacrylate) resin prepared by a new emulsion polymerization process
Bao YZ, Huang ZM, Weng ZX |
| 1912 - 1916 |
Recycling of carbon/epoxy composites
Liu YY, Meng LH, Huang YD, Du JJ |
| 1917 - 1926 |
Effect of rigid particle size on the toughness of filled polypropylene
Dubnikova IL, Berezina SM, Antonov AV |
| 1927 - 1935 |
Preparation of silica-filled poly(2-hydroxymethyl methacrylate) nanocomposites cured by photoirradiation during the sol-gel process
Lin DJ, Chen CC, Su YC, Huang SH, Cheng LP |
| 1936 - 1946 |
Comparative studies of the properties of poly(methyl methacrylate)-clay nanocomposite materials prepared by in situ emulsion polymerization and solution dispersion
Yeh JM, Liou SJ, Lai MC, Chang YW, Huang CY, Chen CP, Jaw JH, Tsai TY, Yu YH |
| 1947 - 1955 |
Surface and thermal characteristics of rubber-modified aromatic polyamide
Park YW, Lee DS |
| 1956 - 1964 |
Block copolymers of unsaturated polyesters and functional elastomers
Cherian AB, Thachil ET |
| 1965 - 1968 |
Cellulose acetate deacetylation in benzene/acetic acid/water systems
Olaru N, Olaru L |
| 1969 - 1975 |
Synthesis and characterization of epoxy resins prepared under microwave irradiation
Bogdal D, Gorczyk J |
| 1976 - 1985 |
Binary and ternary blends of polyethylene, polypropylene, and polyamide 6,6: The effect of compatibilization on the morphology anal rheology
Krache R, Benachour D, Potschke P |
| 1986 - 1998 |
Effects of calcium carbonate, talc, mica, and glass-fiber fillers on the ultrasonic weld strength of polypropylene
Sancaktar E, Walker E |
| 1999 - 2007 |
Antimicrobial and physical properties of woolen fabrics cured with citric acid and chitosan
Hsieh SH, Huang ZK, Huang ZZ, Tseng ZS |
| 2008 - 2013 |
Influence of temperature changes on crystallization of an ethylene-propylene random copolymer
Raimo M |
| 2014 - 2021 |
Study of plasma polymerization of dichloromethane on cotton and polyester fabrics
Jahagirdar CJ, Tiwari LB |
| 2022 - 2031 |
Alloying of poly(vinyl chloride) to reduce plasticizer migration
Thomas NL |
| 2032 - 2040 |
Softening of wood polymers induced by moisture studied by dynamic FTIR spectroscopy
Akerholm M, Salmen L |
| 2041 - 2049 |
Water-swellable hydrophobic porous copolymer resins based on divinylbenzene and acrylonitrile. I. Water-swelling behavior
Tang XS, Jia W, Yan J |
| 2050 - 2056 |
Water-swellable hydrophobic porous copolymer resins based an divinylbenzene and acrylonitrile. II. Pore structure and adsorption behavior
Tang XS, Wang XH, Yan J |
| 2057 - 2064 |
Rheological properties and drug release characteristics of pH-responsive hydrogels
Aminabhavi TM, Agnihotri SA, Naidu BVK |
| 2065 - 2070 |
Effect of molecular chain structure of the cured epoxy resin containing hyperbranched (3-hydroxyphenyl) phosphate on expansion and flame retardance
Deng J, Zhu SW, Shi WF |
| 2071 - 2082 |
Rheological and mechanical properties of compatibilized polystyrene/ethylene vinyl acetate blends
Tang LW, Tam KC, Yue CY, Hu X, Lam YC, Li L |
| 2083 - 2087 |
Rheological study of poly(ethylene glycol)/poly(N-isopropylacrylamide-co-2-acrylamido-2-methylpropanesulpho nic acid) semiinterpenetrating network formation
Zhang C, Easteal AJ |
| 2088 - 2090 |
Imparting affinity sites for adenosine triphosphate on the surface of polyurethane through molecular imprinting
Sreenivasan K |
| 2091 - 2100 |
Polyimides containing 4,4'-bipyridinium units
Gaina C, Gaina V, Airinei A, Avram E |
| 2101 - 2109 |
Pervaporation separation of water-acetic acid mixtures through NaY zeolite-incorporated sodium alginate membranes
Kittur AA, Tambe SM, Kulkarni SS, Kariduraganavar MY |
| 2110 - 2116 |
Independent control of lower critical solution temperature and swelling behavior with pH for poly (N-isopropylacrylamide-co-maleic acid)
Weiss-Malik RA, Solis FP, Vernon BL |
| 2117 - 2122 |
Melt free-radical grafting of maleimides with hindered phenol groups onto polyethylenele
Kim TH |
| 2123 - 2130 |
Adsorption properties of a chelating resin containing hydroxy group and iminodiacetic acid for copper ions
Chen CY, Chen SY |
| 2131 - 2139 |
Thermal decomposition behavior and flame retardancy of polycarbonate containing organic metal salts: Effect of salt composition
Nodera A, Kanai T |
| 2140 - 2149 |
Thermomechanical film properties and aging of blends of poly(lactic acid) and malonate oligomers
Ljungberg I, Wesslen B |
| 2150 - 2157 |
A one-step method for fabricating chitosan microspheres
Kuo SM, Niu GCC, Chang SJ, Kuo CH, Bair MS |
| 2158 - 2163 |
Application of supercritical carbon dioxide in the preparation of biodegradable polylactide membranes
Xu Q, Pang MH, Peng Q, Li JB, Jiang Y |
| 2164 - 2169 |
Metallization of crosslinked epoxy resins derived from diglycidyl ethers of poly(ethylene glycol) and bisphenol A by reduction of polymer-incorporated cobalt ion
Shibata M, Kuribayashi M, Uda T |
| 2170 - 2177 |
Multifunctional coupling agents. II. Chain extension and terminal group modification of polyamides
Jakisch L, Komber H, Wursche R, Bohme F |
| 2178 - 2186 |
Effect of CsBr-MnCl2 mixed fillers on the crystal structure and optical and electrical properties of poly(vinyl alcohol)
Abdelaziz M |
| 2187 - 2195 |
Effect of vibration on crystal morphology and structure of isotactic polypropylene in nonisothermal crystallization
Zheng Q, Shangguan Y, Tong LF, Peng M |
| 2196 - 2204 |
Isothermal crystallization kinetics and melting behavior of nylon/saponite and nylon/montmorillonite nanocomposites
Wu TM, Lien XH, Hsu SF |
| 2205 - 2211 |
Preparation of superparamagnetic immunomicrospheres and application for antibody purification
Liu XQ, Guan YP, Yang Y, Ma ZY, Wu XB, Liu HZ |
| 2212 - 2216 |
Physical properties of ethylene vinyl acetate copolymer (EVA)/natural rubber (NR) blend based foam
Kim MS, Park CC, Chowdhury SR, Kim GH |
| 2217 - 2222 |
Exothermic effect in the process of electron-beam curing of epoxy resins
Zhang ZG, Li YB, Wu Y, Li FM |
| 2223 - 2232 |
Conversion of polyester into heat-resistant polyamide by reacting with aromatic diamine compound II. Semibatch reaction by nitrogen gas sweeping process
Kim Y, Choi YJ |
| 2233 - 2239 |
Polymerized high internal phase emulsions containing a porogen: Specific surface area and sorption
Sergienko AY, Tai HW, Narkis M, Silverstein MS |
| 2240 - 2249 |
Ethylene-propylene-rubber (EPR)/polydimethylsiloxane (PDMS) binary polymer blends: Morphology and viscoelastic properties
Carlberg M, Colombini D, Maurer FHJ |
