| 3305 - 3312 |
New Antimicrobial Polyurea: Synthesis, Characterization, and Antibacterial Activities of Polyurea-Containing Thiosemicarbazide-Metal Complexes
Nishat N, Ahamad T, Zulfequar M, Hasnain S |
| 3313 - 3321 |
Accelerated Ageing of Polypropylene Stabilized by Phenolic Antioxidants Under High Oxygen Pressure
Richaud E, Farcas F, Fayolle B, Audouin L, Verdu J |
| 3322 - 3327 |
Wettability Investigations on the Cellulosic Surface of Alfa Fibers
Bohli N, Perwuelz A, Cheikh RB, Baklouti M |
| 3328 - 3335 |
Fabrication and Characterization of Chitosan/PVA with Hydroxyapatite Biocomposite Nanoscaffolds
Yang DZ, Jin Y, Ma GP, Chen XM, Lu FM, Nie J |
| 3336 - 3347 |
Grafting and Phosphonic Acid Functionalization of Hyperbranched Polyamidoamine Polymer onto Ultrafine Silica
Punyacharoennon P, Charuchinda S, Srikulkit K |
| 3348 - 3354 |
Properties of Copolymers of Aspartic Acid and Aliphatic Dicarboxylic Acids Prepared by Reactive Extrusion
Shogren RL, Willett JL, Westmoreland D, Gonzalez SO, Doll KM, Swift G |
| 3355 - 3359 |
Apparent Low-Field Microwave Absorption Properties of Styrene-Based Copolymers Containing Acid Groups
Lee CH, Kim JS |
| 3360 - 3367 |
Modeling of the Propylene Polymerization Catalyzed by Single-/Multi-Active Site Catalyst: A Monte Carlo Study
Luo ZH, Wang W, Su PL |
| 3368 - 3372 |
Aligned Electrospun Nanofibers induced by Magnetic Field
Yang DZ, Zhang JF, Zhang J, Nie J |
| 3373 - 3378 |
A Study on Solution Properties of Poly(N,N-diethylacrylamide-co-acrylic acid)
Fang J, Bian FL, Shen WG |
| 3379 - 3387 |
Study on Microhardness, Dynamic Mechanical, and Tribological Properties of PEEK/Al2O3 Composites
Goyal RK, Tiwari AN, Mulik UP, Negi YS |
| 3388 - 3394 |
Synthesis and Photopolymerization of 4-(1-Propenyl)oxybutyl Acrylate
Li SJ, He Y, Nie J |
| 3395 - 3400 |
The Study of Free Radical Polymerization of Acrylonitrile by Oxidation-Reduction System Using Potassium Persulfate-Thiourea in Aqueous Medium
Nagaraja GK, Demappa T, Mahadevaiah |
| 3401 - 3409 |
Crystalline Morphology and Dynamical Crystallization of Antibacterial beta-Polypropylene Composite
Chen X, Mai KC |
| 3410 - 3419 |
Synthesis and Characterization of Polyaniline Films Using Fenton Reagent
Ayad MM, Zaki EA |
| 3420 - 3430 |
Undesirable Effects of Heating on Hydrogels
Kabiri K, Mirzadeh H, Zohuriaan-Mehr MJ |
| 3431 - 3438 |
Mechanical Properties of Poly(styrene-co-acrylonitrile)-Modified Epoxy Resin/Glass Fiber Composites
Hameed N, Sreekumar PA, Thomas PS, Jyotishkumar P, Thomas S |
| 3439 - 3447 |
Thermodynamic Study of a Water-Dimethylformamide-Polyacrylonitrile Ternary System
Tan LJ, Pan D, Pan N |
| 3448 - 3454 |
Preparation of Novel Microspherical MgCl2-Based Titanium Catalyst for Propylene Polymerization
Ling YT, Chen W, Xie LJ, Liu YX, Zheng G |
| 3455 - 3463 |
Modification of Dextran Through the Grafting of N-Vinyl-2-Pyrrolidone and Studies of Physicochemical Phenomena in Terms of Metal-Ion Uptake, Swelling Capacity, and Flocculation
Mishra DK, Tripathy J, Mishra MM, Behari K |
| 3464 - 3472 |
Biodegradation of Low-Density Polyethylene-Banana Starch Films
Torres AV, Zamudio-Flores PB, Salgado-Delgado R, Bello-Perez LA |
| 3473 - 3479 |
Effect of the Ceramic Particle Size on the Microstructure and Dielectric Properties of Barium Titanate/Polystyrene Composites
Dang ZM, Zheng Y, Xu HP |
| 3480 - 3487 |
Continuous Polymerization of epsilon-Caprolactone Initiated by Titanium Phenoxide in a Twin-Screw Extruder
Machado AV, Bounor-Legare V, Goncalves ND, Melis F, Cassagnau P, Michel A |
| 3488 - 3500 |
Chemical Structure, Thermal Properties, and Free-Surface Energy Parameters of Coatings Synthesized from Poly(urethane-dimethylsiloxane) Anionomers
Krol P, Byczynski L |
| 3501 - 3507 |
Bifunctional Oligoetherols with Carbazole Ring
Lubczak R |
| 3508 - 3524 |
Physicochemical Characterization of Carrageenans-A Critical Reinvestigation
Berth G, Vukovic J, Lechner MD |
| 3525 - 3531 |
Preparation and In Vitro Release of D,L-tetrahydropalmatine-Loaded Graft Copolymer Nanoparticles
Zhai YL, Qiao Y, Xie CP, Lin XN, Ma YZ, Dong AJ, Deng LD |
| 3532 - 3537 |
Triboelectricity in the Pairs of Polymeric Materials
Truncyte D, Gutauskas M, Zebrauskas S, Virbalis J |
| 3538 - 3543 |
Evaluation of Adhesion Strength, Flammability, Degradation of HBCD-Containing Polyurethane and Adhesives
Amrollahi M, Sadeghi GMM |
| 3544 - 3551 |
Development of a Predictive Model for Polymer/Solvent Diffusion Coefficient Calculations
Perioto FR, Alvarez MET, Araujo WA, Wolf-Maciel MR, Maciel R |
| 3552 - 3559 |
Radiation-Processed Polychloroprene-co-ethylene-propene diene Terpolymer Blends: Evaluation of Blend Morphology, Miscibility, and Physical Properties
Dubey KA, Bhardwaj YK, Panicker L, Chaudhari CV, Kumar V, Goel NK, Sabharwal S |
| 3560 - 3565 |
Prediction of Thermally Aged Chloroprene Rubber Composite Using Deformation Test
Choi SS, Han DH |
| 3566 - 3573 |
Dynamically Vulcanized Polypropylene/Nitrile Rubber Blends: The Effect of Peroxide/Bis-Maleimide Curing System and Different Compatibilizing Systems
Soares BG, de Oliveira M, Meireles D, Sirqueira AS, Mauler RS |
| 3574 - 3581 |
Specific Interactions in Poly(styrene-co-2-Hydroxyethyl acrylate)/Poly(styrene-co-N, N-dimethylacrylamide) Systems
Bouzouia F, Djadoun S |
| 3582 - 3589 |
Synthesis, Characterization, Thermal, and Viscoelastic Properties of an Unsaturated Epoxy Polyester Cured with Different Hardeners
Worzakowska M |
| 3590 - 3595 |
Vinyl Polymerization of Norbornene with Pyrazolylimine Nickel(II)/Methylaluminoxane Catalytic Systems
Wang YY, Lin SA, Zhu FM, Gao HY, Wu Q |
| 3596 - 3605 |
Preparation and Performance of N,O-Carboxymethyl Chitosan-Polyether Sulfone Composite Nanofiltration Membrane in the Separation of Nickel Ions from Aqueous Solutions
Boricha AG, Murthy ZVP |
| 3606 - 3615 |
Semi-IPN Asymmetric Membranes Based on Polyether Imide (ULTEM) and Polyethylene Glycol Diacrylate for Gaseous Separation
Saimani S, Kumar A |
| 3616 - 3623 |
The Effect of Ionic Interaction on the Miscibility and Crystallization Behaviors of Poly(ethylene glycol)/Poly(L-lactic acid) Blends
Lai WC, Liau WB, Yang LY |
| 3624 - 3637 |
Structural and Ordering Behavior of Lamellar Polystyrene-block-Polybutadiene-block-polystyrene Triblock Copolymer Containing Layered Silicates
Vazquez A, Lopez M, Serrano E, Valea A, Zafeiropoulos NE, Mondragon I |
| 3638 - 3646 |
Polymer-Modified Halloysite Composite Nanotubes
Li CP, Liu JG, Qu XZ, Guo BC, Yang ZZ |
| 3647 - 3654 |
The Effects of NCO/OH Ratio on Propylene Oxide-Modified Oil Palm Empty Fruit Bunch-Based Polyurethane Composites
Rozman HD, Tay GS |
| 3655 - 3663 |
Preparation and Properties of MDI/H12MDI-Based Water-Borne Poly(urethane-urea)s-Effects of MDI Content and Radiant Exposure
Huh JH, Kim HI, Rahman MM, Do Kim H |
| 3664 - 3670 |
Synthesis of Poly(paraphenylene vinylene)-Polystyrene-Based Rod-Coil Block Copolymer by Atom Transfer Radical Polymerization: Toward a Self-Organized Lamellar Semiconducting Material
Brochon C, Sary N, Mezzenga R, Ngov C, Richard F, May M, Hadziioannou G |
| 3671 - 3677 |
Synthesis and Characterization of the Two Novel Liquid Crystalline Epoxy Resins Based on Bisphenol-S Mesogen
Huo L, Gao JG, Du YG, Chai ZH |
| 3678 - 3682 |
Properties of Polymer Light-Emitting Diodes Coated on Surface-Treated ITO/Glass Substrates
Shin SB, Gong SC, Jang JK, Gong MS, Chang YC, Sun YB, Chang HJ |
| 3683 - 3689 |
Kinetic Evaluation of Tin-POMS Catalyst for Urethane Reactions
Wang WS, Wiggins JS |
| 3690 - 3696 |
Synthesis and Properties of Electrically-Sensitive Poly(acrylic acid-co-acetoacetoxy ethyl methacrylate) Gels
Jin XC, Kang HM, Huang YM, Liu HL, Hu Y |
| 3697 - 3705 |
Preparation and Characterization of Waterborne Polyurethane/Clay Nanocomposite: Effect on Water Vapor Permeability
Rahman MM, Kim HD, Lee WK |
| 3706 - 3716 |
Properties of Soy Protein Isolate/Poly(vinyl alcohol) Blend "Green" Films: Compatibility, Mechanical Properties, and Thermal Stability
Su JF, Huang Z, Yang CM, Yuan XY |
| 3717 - 3726 |
Amine Functional Chloroaniline Acetaldehyde Condensate-Modified Epoxy Networks
Maity T, Samanta BC, Banthia AK |
| 3727 - 3732 |
Characterization of High Melt Strength Polypropylene Synthesized via Silane Grafting Initiated by In Situ Heat Induction Reaction
An YJ, Zhang ZJ, Bi WG, Wang YH, Tang T |
| 3733 - 3736 |
Preparation and Characterization of Degradation Tunable Poly(epsilon-caprolactone) Using a Sn(Oct)(2)/BF3 Dual Catalyst
Jiang G, Jones IA, Rudd CD, Walker GS |
| 3737 - 3744 |
Polystyrene Composites Containing Crosslinked Polystyrene-Multiwalled Carbon Nanotube Balls
Kwon SM, Kim HS, Kim DY, Yun YS, Jin HJ |
| 3745 - 3751 |
Properties of POSS-Filled Polypropylene: Comparison of Physical Blending and Reactive Blending
Zhou ZY, Zhang Y, Zeng Z, Zhang YX |
| 3752 - 3757 |
Deformation and Fracture Behavior of Polyamide Nanocomposites: The Effect of Clay Dispersion
Kotek J, Kelnar I, Baldrian J, Slouf M |
| 3758 - 3762 |
Synthesis and Properties of a Second-Order, Nonlinear-Optical, Addition-Type Polyimide with High Thermal and Temporal Stability
Li S, Kang H, Wu W, Ye C |
| 3763 - 3769 |
Nano Titanium Oxide Organosol: Synthesis, Characterization, and Application for Electrorheological Fluid
Zhao Y, Wang BX, Ding CL, Zhao XP |
| 3770 - 3777 |
Synthesis and Properties of Ethylene-Substituted Styrene Copolymers
Naga N, Wakita Y, Murase S |
| 3778 - 3784 |
Tensile Strength and Its Variation of PAN-Based Carbon Fibers. III. Weak-Link Analysis
Yao JW, Yu WD, Pan D |
| 3785 - 3794 |
Dial-a-Size: Precision Quantum Dot Nanopatterning Using Cheap, Off-the-Shelf Copolymers
McCarthy W, Ciszek P, Van Zeghbroeck B, Borsa T, Powers R |
| 3795 - 3803 |
A Study in the Uranyl Ions Uptake on Acrylic Acid and Acrylamide Copolymeric Hydrogels
Chauhan GS, Kumar A |
| 3804 - 3811 |
A Study of the Novel Intumescent Flame-Retarded PP/EPDM Copolymer Blends
Zhou S, Wang ZZ, Gui Z, Hu Y |
| 3812 - 3819 |
Studies on the Effect of Curing Agent Concentration and Type of Phenol on Various Physico-Chemical Properties of Resole and Epoxy Blends
Srivastava K, Srivastava D, Tripathi SK |
| 3820 - 3825 |
Correlation Between Artificial and Natural Weathering Tests on Polystyrene-Block-Polybutadiene-Block-Polystyrene Block Copolymer
Li XG, Gao J, Zhao QL, Bao JP, Hu XJ, Wang GY |
| 3826 - 3835 |
Preparation and Evaluation of Poly(3-hydroxybutyrate) Microspheres Containing Bovine Serum Albumin for Controlled Release
Zhao YL, Tian F, Liu CJ, Li F, Xing N |
| 3836 - 3842 |
Dynamic Mechanical Properties of Paper Containing a Polyacrylamide Dry-Strength Resin Additive and Its Distribution Within a Fiber Wall: Effect of the Application Method
Mihara I, Yamauchi T |
| 3843 - 3847 |
Diametric Swelling and Hydrophilic Characteristics of Fibrous Acrylic Ion Exchanger
Zargaran M, Shoushtari AM, Abdouss M |
| 3848 - 3858 |
Changes in Crystalline Morphology, Thermal, and Mechanical Properties with Hydrolytic Degradation of Immiscible Biodegradable PPDX/PCL Blends
Brito Y, Sabino MA, Ronca G, Muller AJ |
| 3859 - 3864 |
Preparation of Poly(AA-AM) Water Superabsorbent by Inverse Microemulsion Polymerization
Wan T, Yao J, Ma XL |
| 3865 - 3870 |
EWOD-Driven Translational Movement of a Liquid Polyelectrolyte Droplet
Ricks-Laskoski HL, Buckley MA, Snow AW |
| 3871 - 3879 |
Flame Retardancy of Whisker Silicon Oxide/Rigid Polyurethane Foam Composites with Expandable Graphite
Bian XC, Tang JH, Li ZM |
| 3880 - 3888 |
Inverse Gas Chromatography for Determining the Dispersive Surface Free Energy and Acid-Base Interactions of Sheet Molding Compound-Part II 14 Ligno-Cellulosic Fiber Types for Possible Composite Reinforcement
Mills RH, Gardner DJ, Wimmer R |
| 3889 - 3896 |
Effect of Polymerization Method on Structure and Properties of Cationic Polyacrylamide
Shen YH, Zhang AQ, Wu GZ |
| 3897 - 3901 |
Novel Divinyl Monomer for Preparation of Unsaturated Polymers
Chen S, Li XY |
| 3902 - 3907 |
Heterogeneous Pd Catalyst for Oxidative Carbonylation of Bisphenol A to Polycarbonate
Okamoto M, Sugiyama J, Yamamoto T |
| 3908 - 3916 |
Formaldehyde-Free Aminoresin Wood Adhesives Based on Dimethoxyethanal
Despres A, Pizzi A, Vu C, Pasch H |
| 3917 - 3925 |
Reaction Pathway and Product Analysis for Hydroxyalkylation of Urea and N,N-Bis(2-hydroxypropyl)urea with Propylene Carbonate
Zarzyka-Niemiec I |
| 3926 - 3933 |
Parameters Controlling the Swelling of Butyl Rubber by Solvents
Nohile C, Dolez PI, Vu-Khanh T |
| 3934 - 3940 |
Removal of Arsenic in Water by an Ion-Exchange Fiber with Amino Groups
Zhang XZ, Jiang K, Tian ZB, Huang WQ, Zhao L |
| 3941 - 3953 |
Material Ductility and Toughening Mechanism of Polypropylene Blended with Bimodal Distributed Particle Size of Styrene-Ethylene-Butadiene-Styrene Triblock Copolymer at High Strain Rate
Mae H, Omiya M, Kishimoto K |
| 3954 - 3962 |
Synthesis, Physical Properties, and Crystallization of Optically Active Poly(L-phenyllactic acid) and Poly(L-phenyllactic acid-co-L-lactic acid)
Tsuji H, Matsuoka H, Itsuno S |
| 3963 - 3972 |
Thermoplastic Elastomers Based on Compatibilized Poly(butylene terephthalate) Blends: Effect of Functional Groups and Dynamic Curing
Shi Q, Stagnaro P, Cai CL, Yin JH, Costa G, Turturro A |
| 3973 - 3984 |
Material Morphology and Electrical Resistivity Differences in EPDM Rubbers
Domeier LA, Yang N |
| 3985 - 3989 |
Preparation and Degradability of Poly(lactic acid)-Poly(ethylene glycol)-Poly(lactic acid)/SiO2 Hybrid Material
Wang HL, Zhang Y, Tian M, Zhai LF, Wei Z, Shi TJ |
| 3990 - 3998 |
Kinetics Study of Ti[O(CH2)(4)OCH=CH2](4) Initiated Ring-Opening Polymerization of epsilon-Caprolactone by Differential Scanning Calorimetry
Li P, Zerroukhi A, Chen J, Chalamet Y, Jeanmaire T, Xia Z |
| 3999 - 4010 |
Thermal, Catalytic, Antimicrobial, and Chelating Aspects of Phenolic Resin and Its Polychelates with f-Block Elements
Patel MM, Kapadia MA, Joshi JD |
| 4011 - 4015 |
Preparation of Gelatin Fiber by Gel Spinning and Its Mechanical Properties
Fukae R, Midorikawa T |
| 4016 - 4021 |
Development of an Analytical Quality Control System of High-Purity Chemical Substances on the CALS Concept Basis
Bessarabov AM, Zhdanovich OA, Yaroshenko AM, Zaikov GE |
| 4022 - 4033 |
Thermal and Thermomechanical Properties of Hyperbranched Polyurethane-Urea/Cenosphere Hybrids
Jena KK, Mishra AK, Raju KVSN |
| 4034 - 4039 |
Preparation of the New Derivatives of Cellulose and Oligomeric Species of Cellulose Containing Magneson II Chromophore
Namazi H, Jafarirad S |
| 4040 - 4048 |
Sequences of Fracture Toughness Micromechanisms in PP/CaCO3 Nanocomposites
Khosh RL, Bagheri R, Zokaei S |
| 4049 - 4054 |
Novel Synthesis of Macrocyclic Disulfides from Poly(phenylene sulfide) by Depolymerization Reaction
Wang SJ, Bian SG, Yan H, Xiao M, Meng YZ |
| 4055 - 4063 |
Preparation and Characterization of Multi-Walled Carbon Nanotube/Poly(ethylene terephthalate) Nanoweb
Ahn BW, Chi YS, Kang TJ |
| 4064 - 4070 |
Synthesis, Characterization, and Properties of Silylene-Acetylene Preceramic Polymers
Ye L, Han WJ, Zhang RL, Hu JD, Zhao T |
| 4071 - 4078 |
Effect of Grafted Maleic Anhydride Content and Recyclability of Dynamically Cured Maleated Natural Rubber/Polypropylene Blends
Nakason C, Saiwari S |
| 4079 - 4083 |
Viscosity and Shear Strength of Natural-Rubber-Based Adhesives in the Presence of Gum Rosin and Petroresin
Poh BT, Yee KW, Lim HB |
| 4084 - 4092 |
Preparation and Properties of Epoxy/Phenol Formaldehyde Novolac/Hexakis(methoxymethyl)melamine Hybrid Resins from In Situ Polymerization
Zhang XH, Zhou BX, Sun XK, Qi GR |
