| 3427 - 3435 |
Novel Aluminum Phosphate/Cyanate Ester Composites: Thermodegradation Behaviors and Kinetic Analyses
Sun ZQ, Gu AJ, Liang GZ, Dai SK, Yuan L |
| 3436 - 3441 |
Influence of High Temperature and Pressure Ammonia Solution Treatment on Interfacial Behavior of Carbon Fiber/Epoxy Resin Composites
Meng LH, Chen ZW, Song XL, Liang YX, Huang YD, Jiang ZX |
| 3442 - 3449 |
Swelling Properties of CMC-g-Poly (AAm-co-AMPS) Superabsorbent Hydrogel
Pourjavadi A, Ghasemzadeh H, Mojahedi F |
| 3450 - 3459 |
Modification of Poly(Vinyl Chloride) by IPN Formation with Poly(Ethyl Acrylate)
Chakrabarti R, Chakraborty D |
| 3460 - 3469 |
Thermo-Responsive Injectable Hydrogel System Based on Poly(N-isopropylacrylamide-co-vinylphosphonic acid). I. Biomineralization and Protein Delivery
Kim SY, Lee SC |
| 3470 - 3476 |
Chemically Modified Sugarcane Bagasse as an Improving Agent for the Properties of Styrene-Butadiene Rubber
Abdelwahab NA, Helaly FM |
| 3477 - 3483 |
The Characteristics of Carbon Nanotube-Reinforced Poly(phenylene sulfide) Nanocomposites
Yu SZ, Wong WM, Hu X, Juay YK |
| 3484 - 3491 |
Aminofunctionalization Effect on the Microtribological Behavior of Carbon Nanotube/Bismaleimide Nanocomposites
Liu LN, Fang ZP, Gu AJ, Guo ZH |
| 3492 - 3497 |
The Effects of Steaming of Beech (Fagus orientalis L.) and Sapele (Entandrophragma cylindricum) Woods on the Adhesion Strength of Varnish
Kilic M |
| 3498 - 3503 |
Study on the Optical Properties of Sulfur-Containing Poly(methyl methacrylate)-Inorganic Hybrid
Liu SJ, Tian LY, Zheng Z, Wang XL |
| 3504 - 3509 |
Synthesis of PEG-Functionalized Poly(diphenylacetylene)s and Their Gas Permeation Properties
Sakaguchi T, Kameoka K, Hashimoto T |
| 3510 - 3519 |
Micromorphology of Macromolecular Superabsorbent Polymer and its Fractal Characteristics
Li YK, Xu TW, Ouyang ZY, Lin XC, Liu HL, Hao ZY, Yang PL |
| 3520 - 3532 |
Synthesis and Characterization of Copolymers of Poly(ethylene terephthalate) and Cyclohexane Dimethanol in a Semibatch Reactor (Including the Process Model)
Sepehri S, Rafizadeh M, Afshar-Taromi F |
| 3533 - 3543 |
Synergistic Effect of Halide Ions and Polyethylene Glycol on the Corrosion Inhibition of Aluminium in Alkaline Medium
Umoren SA, Ebenso EE, Ogbobe O |
| 3544 - 3549 |
Membranes of Cellulose Triacetate Produced from Sugarcane Bagasse Cellulose as Alternative Matrices for Doxycycline Incorporation
Rodrigues G, Toledo LC, Da Silva LG, De Assuncao RMN, Meireles CD, Cerqueira DA, Ruggiero R |
| 3550 - 3556 |
A Moisture Absorption and Adhesion Study of the Process of Blending Film Using p-Alkylphenol-Resorcinol-Formaldehyde and Rubber Latex
Shen MX, Zhang JS, Chen QM |
| 3557 - 3563 |
Laboratory Investigation of the Properties of Asphalt Modified with Epoxy Resin
Yu JY, Cong PL, Wu SP |
| 3564 - 3576 |
Self-Reinforcing Isotactic Polypropylene Prepared Using Crystallizable Solvents
Yoon J, Mccarthy TJ, Lesser AJ |
| 3577 - 3584 |
Polyethylene/Aluminum Nanocomposites: Improvement of Dielectric Strength by Nanoparticle Surface Modification
Huang XY, Ma ZS, Wang YQ, Jiang PK, Yin Y, Li Z |
| 3585 - 3589 |
Study on Partially Oxidized Sodium Alginate with Potassium Permanganate as the Oxidant
Lu LB, Zhang P, Cao Y, Lin Q, Pang SJ, Wang HM |
| 3590 - 3595 |
Structure and Properties of Closed-Cell Foam Prepared from Irradiation Crosslinked Silicone Rubber
Liu PB, Liu DL, Zou HW, Fan P, Xu W |
| 3596 - 3604 |
Polymers Based on N,N-Diglycidylaniline. I. Investigations of the Curing Kinetics by Dynamic Differential Scanning Calorimetry Measurements
Janeczek H, Siwy M, Schab-Balcerzak E |
| 3605 - 3611 |
Alkaline-Developable, Chemically Amplified, Negative-Type Photosensitive Polyimide Based on Polyhydroxyimide, a Crosslinker, and a Photoacid Generator
Saito Y, Mizoguchi K, Higashihara T, Ueda M |
| 3612 - 3618 |
Modification of Ramie Fiber with an Amine-Containing Polymer via Atom Transfer Radical Polymerization
Liu ZT, Sun CA, Liu ZW, Lu J |
| 3619 - 3629 |
Humic Acid/Polypyrrole on a Paraffin-Impregnated Graphite Electrode and Its Use in Arsenic Extraction
Antilen M, Armijo F |
| 3630 - 3637 |
Morphology, Mechanical Properties, and Thermal Stability of Poly(L-lactic acid)/Poly(butylene succinate-co-adipate)/Silicon Dioxide Composites
Wang RY, Wang SF, Zhang Y |
| 3638 - 3645 |
Adsorption of Hg2+ on a Novel Chelating Fiber Prepared by Preirradiation Grafting and Amination
Yang Y, Ma NF, Zhang QK, Chen SX |
| 3646 - 3655 |
Alkali Treatments of Lyocell in Continuous Processes. I. Effects of Temperature and Alkali Concentration on the Treatments of Plain Woven Fabrics
Siroky J, Manian AP, Siroka B, Abu-Rous M, Schlangen J, Blackburn RS, Bechtold T |
| 3656 - 3660 |
Bottleneck for Reactive Mola Mass in the Polymerization of Propylene Oxide Initiated with Potassium t-Butoxide
Yang PF, Zhu XW, Yu YH, Xia YM, Li TD |
| 3661 - 3670 |
Mechanical Properties of Styrene-Butadiene-Styrene Block Copolymer Composites Filled with Calcium Carbonate Treated by Liquid Polybutadienes
Song XF, Yoshino H, Shibata H, Nagatani A, Ueda Y |
| 3671 - 3675 |
Synthesis of Polyimide Microparticles by Dispersion Polymerization
Ni XW, Shen H, Chen L, Wu G, Lu R, Miyakoshi T |
| 3676 - 3686 |
Effects of Structural Variables on AUL and Rheological Behavior of SAP Gels
Ramazani-Harandi MJ, Zohuriaan-Mehr MJ, Yousefi AA, Ershad-Langroudi A, Kabiri K |
| 3687 - 3692 |
Influence of Absorbed Moisture on Antifelting Property of Wool Treated with Atmospheric Pressure Plasma
Xu HL, Peng SJ, Wang CX, Yao L, Sun J, Ji F, Qiu YP |
| 3693 - 3701 |
Cure Kinetics and Catalyzed Effect of Hydroxyl Group of LC Diglycidyl Ether of Bisphenol-S with Aromatic Diamines
Huo L, Gao JG, Zhang XN |
| 3702 - 3709 |
Xanthate-Mediated Polymerization of Styrene on Hyperbranched Polyethylenimine: Synthesis, Characterization, and Guest-Encapsulating Property
Wan DC, Yang ZL, Pu HT, Zhao JX, Yang GJ |
| 3710 - 3715 |
Development of a Biodegradable Rice Straw-g-poly(methylmethacrylate)/Sodium Silicate Composite Flame Retardant
Samal R, Sahoo PK |
| 3716 - 3724 |
Formation of Highly Oriented Biodegradable Polybutylene Succinate Adipate Nanocomposites: Effects of Cation Structures on Morphology,, Free Volume, and Properties
Dean KM, Pas SJ, Yu L, Ammala A, Hill AJ, Wu DY |
| 3725 - 3731 |
Method for Preparing Polyaluminocarbosilane
He GM, Chen JX, Chen LF, Xia HP, Zhang LT |
| 3732 - 3741 |
Blending of Low-Density Polyethylene with Vanillin for Improved Barrier and aroma-releasing Properties in Food Packaging
Jagadish RS, Raj B, Asha MR |
| 3742 - 3749 |
Factorial Experimental Design Approach in Semicontinuous Emulsion Polymerization of Methyl Methacrylate to Study the Effect of Process Variables
Mishra S, Singh J, Choudhary V |
| 3750 - 3756 |
Influence of Varying Fiber Lengths on Mechanical, Thermal, and Morphological Properties of MA-g-PP Compatibilized and Chemically Modified Short Pineapple Leaf Fiber Reinforced Polypropylene Composites
Chattopadhyay SK, Khandal RK, Uppaluri R, Ghoshal AK |
| 3757 - 3765 |
Study on the Synthesis, Characterization, and Kinetic of Bulk Polymerization of Disproportionated Rosin (beta-Acryloxyl Ethyl) Ester
Wang JF, Lin MT, Wang CP, Chu FX |
| 3766 - 3773 |
Effect of Ferrocene Moieties on the Copper-Based Atom Transfer Radical Polymerization of Methyl Methacrylate
Sunsin A, Wisutsri N, Suriyarak S, Teanchai R, Jindabot S, Chaicharoenwimolkul L, Somsook E |
| 3774 - 3781 |
Studies on the Possibility of Recycling Microencapsulated Disperse Dye-Bath Effluents
Ji JL, Yang XJ, Lu LD, Wang X |
| 3782 - 3790 |
Highly Thermally Stable Novolac Derivatives and Their Properties in Epoxy Composites
Wu HH, Chu PP |
| 3791 - 3798 |
Fracture Behaviors of Metallocene Catalyzed Polyethylene Elastomer Via Peroxide Crosslinking
Lai SM, Liu JL, Hu SH, Huang CH, Wang SJ, Chien SC |
| 3799 - 3808 |
Extraction, Identification and Sorption Studies of Dyes from Madder on Wool
Farizadeh K, Montazer M, Yazdanshenas ME, Rashidi A, Malek RMA |
| 3809 - 3814 |
Structure and Properties of Polypropylene-Wrapped Carbon Nanotubes Composite
Li WH, Chen XH, Yang Z, Xu LS |
| 3815 - 3822 |
Reactive Mold Filling in Resin Transfer Molding Processes with Edge Effects
Ding YY, Jia YX, Yang JY, Sun S, Shi TF, An LJ |
| 3823 - 3830 |
Thermomechanical Characteristics of Benzoxazine-Urethane Copolymers and Their Carbon Fiber-Reinforced Composites
Rimdusit S, Liengvachiranon C, Tiptipakorn S, Jubsilp C |
| 3831 - 3839 |
Injectable and Thermosensitive Poly(organophosphazene) Hydrogels for a 5-Fluorouracil Delivery
Lee SM, Chun CJ, Heo JY, Song SC |
| 3840 - 3846 |
Concentration Profile of Glass Fiber Bundles in Epoxy-Based Gradient Composites During Centrifugation
Hashmi SAR, Dwivedi UK, Chand N |
| 3847 - 3859 |
Polymer Structure of Commercial Hydrolyzable Tannins by Matrix-Assisted Laser Desorption/Ionization-Time-of-Flight Mass Spectrometry
Pizzi A, Pasch H, Rode K, Giovando S |
| 3860 - 3865 |
Intumescent Polylactide: A Nonflammable Material
Fontaine G, Bourbigot S |
| 3866 - 3871 |
Rheological Behavior of Alginate Solutions for Biomanufacturing
Rezende RA, Bartolo PJ, Mendes A, Maciel R |
| 3872 - 3882 |
Free-Radical Retrograde-Precipitation Copolymerization of Vinyl Acetate and Acrylic Acid
Caneba GT, Xu ZY, Dar YL |
| 3883 - 3890 |
Phase Morphology and Clay Distribution of Poly(trimethylene terephthalate)/Polypropylene/Montmorillonite Nanocomposites
Xue ML, Li P |
| 3891 - 3895 |
Surface Modification of PET Fibers with the Use of beta-Cyclodextrin
Voncina B, Vivod V, Chen WT |
| 3896 - 3900 |
The Effect of Heat History on Thermal Degradation of Elastomers Containing Butadiene Units
Amraee IA |
| 3901 - 3909 |
Effect of Magnesium Methacrylate and Zinc Methacrylate on Bond Properties of Thermal Insulation Material Based on NBR/EPDM Blends
Gao GX, Zhang ZC, Zheng YS, Jin ZH |
| 3910 - 3919 |
The Partial Replacement of Silica or Calcium Carbonate by Halloysite Nanotubes as Fillers in Ethylene Propylene Diene Monomer Composites
Pasbakhsh P, Ismail H, Noor M, Fauzi A, Abu Bakar A |
| 3920 - 3928 |
Reduction in Tactoid Size as a Means for Reinforcing High-Density Polyethylene/Montmorillonite Nanocomposites
Marega C, Causin V, Marigo A, Ferrara G |
| 3929 - 3943 |
The Role of a Novel p-phenylen-bis-maleamic Acid Grafted Atactic Polypropylene Interfacial Modifier in Polypropylene/Mica Composites as Evidenced by Tensile Properties
Garcia-Martinez JM, Areso S, Collar EP |
| 3944 - 3953 |
Enzyme-Based Hydrogels Containing Dextran as Drug Delivery Carriers: Preparation, Characterization, and Protein Release
Lai JY, Fang R, Wang LQ, Tu KH, Zhao CS, Qian XQ, Zhan SL |
| 3954 - 3962 |
Preparation and Characterization of Ultra-Low Molecular Weight Poly(vinyl alcohol) Graft Copolymer
Guo M, Xia J, Fan Z, Zhao Z, Mi H |
| 3963 - 3971 |
Adhesion of Surface-Grafted Low-Density Polyethylene Plates with Enzymatically Modified Chitosan Solutions
Noto K, Matsumoto S, Takahashi Y, Hirata M, Yamada K |
| 3972 - 3979 |
Effects of Molecular Weight on Electroluminescence of Nanogold-Bonded poly(9,9-dioctylfluorene-alt-thiophene) at a Constant Polymer-to-Gold Weight Ratio
Ji HD, Tu YC, Wu SH, Liu CH, Su YW, Tsiang RCC |
| 3980 - 3984 |
Aqueous Dispersions of DBSA-Doped Polyaniline: One-Pot Preparation, Characterization, and Properties Study
Babazadeh M |
| 3985 - 3992 |
Mechanical Properties, Thermal Stability, Gas Permeability, and Phase Morphology in Natural Rubber/Bromobutyl Rubber Blends
Rattanasom N, Prasertsri S, Suchiva K |
| 3993 - 4002 |
Synthesis and Properties of Poly(ether Imide)s Derived from 2,5-Bis(3,4-Dicarboxyphenoxy)biphenyl Dianhydride and Aromatic Ether-Diamines
Hsiao SH, Yang CP, Chen YC, Wang HM, Guo WJ |
| 4003 - 4014 |
Shear-Induced Crystallization of Injection Molded Vetiver Grass-Polypropylene Composites
Somnuk U, Suppakarn N, Sutapun W, Ruksakulpiwat Y |
| 4015 - 4022 |
Supercritical Carbon Dioxide-Assisted Loosening Preparation of Dry Leather
Yang QY, Qin SF, Chen JF, Ni W, Xu Q |
| 4023 - 4031 |
Emulsion Polymerization of Styrene with Amphiphilic Random Copolymer as Surfactant: Predominant Droplet Nucleation
Liu L, Liu XL, Han Y, Chen QR, Yu JF, Liu FQ |
| 4032 - 4041 |
Microphase Separation Behavior on the Surfaces of Poly(dimethylsiloxane)-block-poly(2,2,3,3,4,4,4-heptafluorobutyl methacrylate) Diblock Copolymer Coatings
Luo ZH, Yu HJ, Zhang W |
| 4042 - 4051 |
Synthesis, Characterization, and Application of Composite Alginate Microspheres with Magnetic and Fluorescent Functionalities
Liu JW, Zhang Y, Yang T, Ge YQ, Zhang S, Chen ZP, Gu N |
| 4052 - 4065 |
Synthesis and Characterization of Polyurethane Hybrids: Influence of the Polydimethylsiloxane Linear Chain and Silsesquioxane Cubic Structure on the Thermal and Mechanical Properties of Polyurethane Hybrids
Madhavan K, Reddy BSR |
| 4066 - 4076 |
Role of Amphiphilic Dopants on the Shape and Properties of Electrically Conducting Polyaniline-Clay Nanocomposite
Reena VL, Sudha JD, Pavithran C |
| 4077 - 4084 |
Effects of Ingredients on Thermal and Mechanical Properties of Acrylic Bone Cements
Endogan T, Serbetci K, Hasirci N |
| 4085 - 4091 |
Multiparameter Solution Model and Evaluation of Polymer-Polymer Miscibility Using Inverse Gas Chromatography Data
Huang JC |
| 4092 - 4099 |
Effect of Network Relaxation on Void Propagation and Failure in Isotactic Polypropylene at Large Strain
Na B, Lv RH, Xu WF |
| 4100 - 4115 |
Crystallization Kinetics of Poly(L-Lactide)/Carbonated Hydroxyapatite Nanocomposite Microspheres
Zhou WY, Duan B, Wang M, Cheung WL |
