| 4409 - 4415 |
Miscibility and crystallization behavior of biodegradable poly(epsilon-caprolactone)/tannic acid blends
Liang YG, Yang F, Qiu ZB |
| 4416 - 4423 |
Modification of melamine-formaldehyde resins by substances from renewable resources
Kohlmayr M, Zuckerstatter G, Kandelbauer A |
| 4424 - 4432 |
Effect of attapulgite contents on release behaviors of a pH sensitive carboxymethyl cellulose-g-poly(acrylic acid)/attapulgite/sodium alginate composite hydrogel bead containing diclofenac
Wang Q, Wang WB, Wu J, Wang AQ |
| 4433 - 4442 |
Thermal stability of HCl-doped-polyaniline and TiO2 nanoparticles-based nanocomposites
Ansari MO, Mohammad F |
| 4443 - 4451 |
Synthesis and characterization of poly(hydroxamic acid)-poly(amidoxime) chelating ligands from polymer-grafted acacia cellulose
Wen SSY, Rahman ML, Arshad SE, Surugau NL, Musta B |
| 4452 - 4456 |
Alternating multilayer structure of polyethylene/polypropylene blends obtained through injection molding
Jiang K, Yu FL, Bai HW, Gao J, Deng H, Zhang Q, Fu Q |
| 4457 - 4465 |
Morphological changes of poly(ethylene terephthalate-co-isophthalate) during solid state polymerization
Vouyiouka SN, Filgueiras V, Papaspyrides CD, Lima EL, Pinto JC |
| 4466 - 4474 |
Organic liquid stimuli-response behaviors of electrically conductive microfibrillar composite with a selective conductive component distribution
Dai K, Zhang YC, Tang JH, Ji X, Li ZM |
| 4475 - 4485 |
RAFT polymerization of N-vinyl pyrrolidone using prop-2-ynyl morpholine-4-carbodithioate as a new chain transfer agent
Mishra V, Kumar R |
| 4486 - 4490 |
Annealing effect on chain segment motion and charge detrapping in polyamide 610
Xu P, Zhang XY |
| 4491 - 4495 |
Synthesis and characterization of novel silver/L-phenylalanine-based optically active polyacrylate nanocomposite
Mallakpour S, Rafiee Z, Ashrafi A |
| 4496 - 4501 |
Synthesis and characterization of star-shaped poly(ethylene glycol)-block-poly(L-lactic acid) copolymers by melt polycondensation
Lin YL, Zhang AQ, Wang LS |
| 4502 - 4511 |
Synergistic flame retardant effect of poly(ether sulfones) and polysiloxane on polycarbonate
Liu SM, Yang Y, Jiang ZJ, Zhou YH, Zuo J, Zhao JQ |
| 4512 - 4516 |
The first report on the atom transfer radical polymerization of an optically active acidic monomer based on L-phenylalanine
Mallakpour S, Rafiee Z |
| 4517 - 4529 |
Ageing of poly(ethylene terephthalate) and poly(ethylene naphthalate) under moderately accelerated conditions
Turnbull L, Liggat JJ, MacDonald WA |
| 4530 - 4541 |
Mechanical properties of natural fiber hybrid composites based on renewable thermoset resins derived from soybean oil, for use in technical applications
Adekunle K, Cho SW, Ketzscher R, Skrifvars M |
| 4542 - 4546 |
Amine treatment of polyvinyl chloride/wood flour composites
Muller M, Gruneberg T, Militz H, Krause A |
| 4547 - 4553 |
A comparison study of lignocellulosic-thermoplastic composites prepared from different compounding techniques
Rozman HD, Mulisa AS, Tay GS |
| 4554 - 4563 |
Synthesis of a novel polymer cholesterol-poly(ethylene glycol) 2000-glycyrrhetinic acid (chol-PEG-GA) and its application in brucine liposome
Chen ZP, Xiao L, Liu D, Feng MS, Xiao YY, Chen J, Li W, Li WD, Cai BC |
| 4564 - 4571 |
Study on wear, cutting and chipping behaviors of hydrogenated nitrile butadiene rubber reinforced by carbon black and in-situ prepared zinc dimethacrylate
Wei Z, Lu YL, Meng Y, Zhang LQ |
| 4572 - 4578 |
Toughening of cycloaliphatic epoxy resin improved by reactive copolymers with flexible alkyl side chains
Ochi M, Ichikawa N, Harada M, Hara M, Uchida H |
| 4579 - 4589 |
Mechanisms of plastic deformation in biodegradable polylactide/poly(1,4-cis-isoprene) blends
Kowalczyk M, Piorkowska E |
| 4590 - 4597 |
The role of surfactant type and modifier concentration in tailoring the properties of chlorobutyl rubber/organo clay nanocomposites
Saritha A, Joseph K, Thomas S, Muraleekrishnan R |
| 4598 - 4605 |
Morphology and electrical properties of carbon black/poly(ethylene terephthalate)/polypropylene composite
Farimani HE, Ebrahimi NG |
| 4606 - 4611 |
Effect of 2,2-dimethyl malonate on the volume shrinkage control of the CaCO3/unsaturated polyester resin composites
Yan Y, Wang H, Wang XJ, Zhu WW |
| 4612 - 4619 |
High performance PEEK/AlN micro- and nanocomposites for tribological applications
Goyal RK, Tiwari AN, Negi YS |
| 4620 - 4627 |
Influence of laser irradiation on the optical and the mechanical properties of Makrofol-DE polycarbonate
Hanafy TA, Nouh SA, Yasein MN, El Sayed AM |
| 4628 - 4635 |
Morphology and mechanical properties of nanocomposites of cellulose acetate and organic montmorillonite prepared with different plasticizers
de Lima JA, Pinotti CA, Felisberti MI, Goncalves MD |
| 4636 - 4644 |
Epoxidized perfluoropolyethers: A route to hydrophobic, negative-tone photoresists
Chaffins S, Hinch G, DeKam K, Waterhous V, Smith J, Overbay M, Bilich D, Hovermale C, Jones J |
| 4645 - 4654 |
The dispersants effect on physical properties of long-lasting luminescent polypropylene
Jang SC, Shu YC, Chuang FS, Tsen WC, Chow JD, Chen CC |
| 4655 - 4662 |
Synthesis of 9-(4-nitrophenylsulfonyl)-9H-carbazole: Comparison of an impedance study of poly[9-(4-nitrophenylsulfonyl)-9H-carbazole] on gold and carbon fiber microelectrodes
Ates M, Uludag N |
| 4663 - 4670 |
ABS nanocomposite films based on functionalized-graphene sheets
Heo C, Moon HG, Yoon CS, Chang JH |
| 4671 - 4677 |
Polyaniline nanofibers supported on titanium as templates for immobilization of Pd nanoparticles: A new electro-catalyst for hydrazine oxidation
Hosseini MG, Zeynali S, Momeni MM, Najjar R |
| 4678 - 4685 |
Hollow poly(N-isopropylacrylamide)-co-poly(acrylic acid) microgels with high loading capacity for drugs
Chen Y, Chen YB, Nan JY, Wang CP, Chu FX |
| 4686 - 4693 |
Valproate-Loaded hydrogel nanoparticles: Preparation and characterization
Hamidi M, Azadi A, Mohamadi-Samani S, Rafiei P, Ashrafi H |
| 4694 - 4701 |
Preparation and characterization of polyacrylate/polymerized rosin composite emulsions by seeded semicontinuous emulsion polymerization
Chen PX, Zeng XR, Li HQ, Liu XD, Liu DD, Li XL |
| 4702 - 4710 |
Reinforcement of soy polyol-based rigid polyurethane foams by cellulose microfibers and nanoclays
Zhu M, Bandyopadhyay-Ghosh S, Khazabi M, Cai H, Correa C, Sain M |
| 4711 - 4720 |
Expandable styrene/methyl methacrylate copolymer: Synthesis and determination of VOCs by combined thermogravimetry/differential thermal analysis-gas chromatography/mass spectrometry
Haddadi E, Mehravar E, Abbasi F, Jalili K |
| 4721 - 4728 |
Grafting hydroxy-terminated polybutadiene onto nanosilica surface for styrene butadiene rubber compounds
Pourhossaini MR, Razzaghi-Kashani M |
| 4729 - 4739 |
Study of morphological and mechanical performance of amine-cured glassy epoxy-clay nanocomposites
Mouloud A, Cherif R, Fellahi S, Grohens Y, Pillin I |
| 4740 - 4746 |
In situ polymerization and photophysical properties of poly(p-phenylene benzobisoxazole)/multiwalled carbon nanotubes composites
Zhou CJ, Qiu XY, Zhuang QX, Han ZW, Wu QL |
| 4747 - 4754 |
Preparation and in vitro characterization of poly(sebacic acid-co-ricinoleic acid)-based tamoxifen citrate-loaded microparticles for breast cancer
Hiremath JG, Rudani CG, Domb AJ, Suthar RV, Khamar NS |
| 4755 - 4764 |
Synthesis and characterization of poly(2-hydroxyethyl methacrylate)-functionalized Fe-Au/core-shell nanoparticles
Bach LG, Islam MR, Kim JH, Kim HG, Lim KT |
| 4765 - 4771 |
Polyelectrolyte-aided synthesis of gold and platinum nanoparticles: Implications in electrocatalysis and sensing
Rao CRK |
| 4772 - 4781 |
Working mechanism of a high temperature (200 degrees C) synthetic cement retarder and its interaction with an AMPS (R)-based fluid loss polymer in oil well cement
Tiemeyer C, Plank J |
| 4782 - 4788 |
Properties of phenol-formaldehyde resins prepared from phenol-liquefied lignin
Lee WJ, Chang KC, Tseng IM |
| 4789 - 4798 |
Modeling of the compaction response of jute fabrics in liquid composite molding processes
Francucci G, Rodriguez ES |
| 4799 - 4808 |
The effect of maleic anhydride grafting efficiency on the flexural properties of polyethylene composites
Gunning MA, Istrate OM, Geever LM, Lyons JG, Blackie P, Chen B, Higginbotham CL |
| 4809 - 4818 |
Preparation of coated thermo-regulating textiles using Rubitherm-RT31 microcapsules
Sanchez-Silva L, Rodriguez JF, Romero A, Sanchez P |
| 4819 - 4826 |
Hydrolysis of SnCl2 on polyaniline: Formation of conducting PAni-SnO2 composite with enhanced electrochemical properties
Rao CRK, Vijayan M, Anwar S, Jeyakumar D |
| 4827 - 4837 |
Preparation of epoxy functionalized PP with unique structure and its post-ring open reaction
Wang SS, Shao L, Song ZQ, Zhao JR, Feng Y |
| 4838 - 4846 |
Development of fibrillar morphology in immiscible PP/PS blends under shear flow
Mei Y, Huang YJ, He YS, Yang Q |
| 4847 - 4853 |
Dielectric properties and structures of melt-compounded poly(ethylene oxide)-montmorillonite nanocomposites
Choudhary S, Sengwa RJ |
| 4854 - 4863 |
Crystal structure and orientation of uniaxially and biaxially oriented PLA and PP nanoclay composite films
Tabatabaei SH, Ajji A |
| 4864 - 4873 |
Preparation of dynamically vulcanized thermoplastic elastomer nanocomposites based on LLDPE/reclaimed rubber
Razmjooei F, Naderi G, Bakhshandeh G |
| 4874 - 4881 |
Effect of Al2O3 fibers on the thermal conductivity and mechanical properties of high density polyethylene with the absence and presence of compatibilizer
Zhang SA, Ke YC, Cao XY, Ma YM, Wang FS |
| 4882 - 4888 |
Influence of a density mismatch on TMPTMA shells nonconcentricity
Lattaud C, Guillot L, Brachais CH, Fleury E, Legaie O, Couvercelle JP |
| 4889 - 4896 |
Poly(propylene-co-ethylene) produced with a conventional and a self-supported ziegler-natta catalyst: Effect of ethylene and hydrogen concentration on activity and polymer structure
Vestberg T, Parkinson M, Fonseca I, Wilen CE |
| 4897 - 4903 |
Physiochemical, circular dichroism-induced helical conformation and optical property of chitosan azo-based amino methanesulfonate complex
Kumar S, Koh J |
| 4904 - 4914 |
Effect of air blowing on the morphology and nanofiber properties of blowing-assisted electrospun polycarbonates
Hsiao HY, Huang CM, Liu YY, Kuo YC, Chen H |
| 4915 - 4919 |
Synthesis of polysiloxane-type multifunctional flame retardant and its application in epoxy systems
Kang NJ, Du ZJ, Li HQ, Zhang C |
| 4920 - 4925 |
Thermal effect of carbamates based polymer on the TiO2 growth
Shin JW, Kim SY |
| 4926 - 4934 |
A physical model for a quality control concept in injection molding
Lucyshyn T, Kipperer M, Kukla C, Langecker GR, Holzer C |
| 4935 - 4944 |
Polyindene/organo-montmorillonite conducting nanocomposites. II. electrorheological properties
Guzel S, Erol O, Unal HI |
| 4945 - 4952 |
UV-radiation induced graft copolymerization of methyl methacrylate onto sodium salt of partially carboxymethylated psyllium
Dholakia A, Jivani J, Trivedi J, Patel K, Trivedi H |
| 4953 - 4960 |
A polymer-drug conjugate for doxorubicin: Synthesis and biological evaluation of pluronic F127-doxorubicin amide conjugates
Gao QH, Han XL, Zhu J, Chen RJ, Sun BW |
| 4961 - 4968 |
Determination of optimal production parameters for polyacrylonitrile nanofibers
Kirecci A, Ozkoc U, Icoglu HI |
| 4969 - 4977 |
Gamma-radiation initiated synthesis of Psyllium and acrylic acid-based polymeric networks for selective absorption of water from different oil-water emulsions
Kumar K, Kaith BS, Jindal R, Mittal H |
| 4978 - 4985 |
Morphological, transport, and adsorption properties of ethylene vinyl acetate/polyurethane/bentonite clay composites
Dlamini DS, Mishra AK, Mamba BB |
| 4986 - 4992 |
Melt characteristics, mechanical, and thermal properties of blown film from modified blends of poly(butylene adipate-co-terephthalate) and poly(lactide)
Sirisinha K, Somboon W |
| 4993 - 5001 |
Optimized process for the inclusion of carbon nanotubes in elastomers with improved thermal and mechanical properties
Cadambi RM, Ghassemieh E |
| 5002 - 5009 |
Mechanical properties and morphology of hot drawn polyacrylonitrile nanofibrous yarn
Ravandi SAH, Hassanabadi E, Tavanai H, Abuzade RA |
| 5010 - 5020 |
Adsorption characterization of lead(II) and cadmium(II) on crosslinked carboxymethyl starch
Chen YX, Zhong BH, Fang WM |
| 5021 - 5026 |
Salinity effects on the degree of hydrophobicity and longevity for superhydrophobic fibrous coatings
Ochanda FO, Samaha MA, Tafreshi HV, Tepper GC, Gad-el-Hak M |
| 5027 - 5036 |
Toughness enhancement of poly(lactic acid) by melt blending with natural rubber
Jaratrotkamjorn R, Khaokong C, Tanrattanakul V |
| 5037 - 5045 |
Poly(methyl methacrylate)/montmorillonite nanocomposites prepared with a novel reactive phosphorus-nitrogen-containing monomer of N-(2-(5,5-dimethyl-1,3,2-dioxaphosphinyl-2-ylamino)ethyl)- acrylamide and its thermal and flame retardant properties
Huang GB, Wang X, Fei ZD, Liang HD, Ye YY |
| 5046 - 5055 |
Thiolated chitosans: In vitro comparison of mucoadhesive properties
Mueller C, Verroken A, Iqbal J, Bernkop-Schnuerch A |
| 5056 - 5063 |
Vulcanization behavior and mechanical properties of organoclay fluoroelastomer nanocomposites
Lakshminarayanan S, Gelves GA, Sundararaj U |
| 5064 - 5070 |
Effect of blending sequence on the morphology and properties of polyamide 6/EPDM-g-MA/epoxy blends
Wang Q, Zhu JY, Wang P, Li LP, Yang Q, Huang YJ |
| 5071 - 5078 |
Smart and structural thermosets from the cationic copolymerization of a vegetable oil
Meiorin C, Aranguren MI, Mosiewicki MA |
| 5079 - 5088 |
Poly(N-isopropylacrylamide) hydrogel: Effect of hydrophilicity on controlled release of ibuprofen at different pH
Francis R, Baby DK, Kumar DS |
| 5089 - 5096 |
Synthesis and structural characterization of novel chiral nanostructured poly(esterimide)s containing different natural amino acids and 4,4'-thiobis(2-tert-butyl-5-methylphenol) linkages
Mallakpour S, Soltanian S |
| 5097 - 5105 |
Investigation on microstructural behavior of styroflex/polyaniline blends by WAXS
Siddaramaiah, Souza FG, Soares BG, Somashekar R |
| 5106 - 5112 |
Synthesis, structure, and thermo-physical properties of Fe2O3 center dot Al2O3 and polyethylene nanocomposites
Vakhshouri AR, Azizov A, Aliyeva R, Bagirova S |
| 5113 - 5121 |
Effect of acrylic monomer content on the properties of waterborne poly(urethane-urea)/acrylic hybrid materials
Son SJ, Kim KB, Lee YH, Lee DJ, Kim HD |
| 5122 - 5129 |
Rheokinetic of a gelled resol resin curing by dynamic-temperature rheometry based on rectangular torsion strain
Dominguez JC, Oliet M, Alonso MV, Rojo E, Rodriguez F |
| 5130 - 5137 |
Effect of some substituted anilines-formaldehyde polymers on mild steel corrosion in hydrochloric acid medium
Shukla SK, Quraishi MA |
| 5138 - 5144 |
Silver polyhedron coated electrospun nylon 6 nano-fibrous membrane with good infrared extinction, ultraviolet shielding and water vapor permeability
Zhao PT, Fan JT |
| 5145 - 5153 |
The effect of SiO2 porosity on activity profiles and comonomer incorporation in slurry ethylene/butene-1 polymerization by (SiO2/MgCl2/TEOS/TiCl4) catalyst system
Vakili M, Arabi H, Mobarakeh HS |
| 5154 - 5164 |
Influence of cocatalyst on the structure and properties of polypropylene/poly (ethylene-co-propylene) in-reactor alloys prepared by MgCl2/TiCl4/diester type Ziegler-Natta catalyst
Tu ST, Fu ZS, Fan ZQ |
| 5165 - 5171 |
Preparation and properties of polyamide 6 fibers prepared by the gel spinning method
Jia QX, Xiong ZJ, Shi CM, Zhang LQ, Wang XN |
| 5172 - 5179 |
Structure and property relations between the polyacrylonitrile-based prestabilized fibers and the partially carbonized fibers
Yu MJ, Xu Y, Wang CG, Zhu B, Wang YX, Hu XY, Lin X |
| 5180 - 5186 |
Preparation of intercalated Mg-Al layered double hydroxides and its application in PVC thermal stability
Zhang XF, Zhao TB, Pi H, Guo SY |
| 5187 - 5193 |
Chiral separation of D,L-tyrosine through nitrocellulose membrane
Jiang YD, Zhang JH, Xie SM, Lv YC, Zhang M, Ma C, Yuan LM |
| 5194 - 5199 |
Using carbon black nanoparticles to dye the cationic-modified cotton fabrics
Wang CX, Zhang X, Lv FB, Peng LY |
| 5200 - 5208 |
Oxidation and crosslinking processes during thermal aging of low-density polyethylene films
Chabira SF, Sebaa M, G'sell C |
| 5209 - 5219 |
Generalized magneto-thermoelastic medium with variable material properties subjected to ramp-type heating
Youssef HM, El-Bary AA |
| 5220 - 5228 |
Effect of the electron beam irradiation on the properties of epoxidized natural rubber (ENR 50) compatibilized linear low-density polyethylene/soya powder blends
Sam ST, Ismail H, Ahmad Z, Ratnam CT |
| 5229 - 5235 |
Effect of polyurethane molecular weight on the properties of polyurethane-poly(butyl methacrylate) hybrid latex prepared by miniemulsion polymerization
Tian C, Zhou Q, Cao L, Su ZQ, Chen XN |
| 5236 - 5246 |
Modification and characterization of poly (ethylene terephthalate)-grafted-acrylic acid/acryl amide fiber for removal of lead from human plasma and environmental samples
Panahi HA, Abdouss M, Ghiabi F, Moniri E, Shoushtari AM |
| 5247 - 5253 |
Preparation of highly filled wood flour/recycled high density polyethylene composites by in situ reactive extrusion
Li ZW, Gao H, Wang QW |
| 5254 - 5259 |
Microwave properties of selected thermoplastic conducting composites
Lakshmi K, John H, Joseph R, Mathew KT, George KE |
| 5260 - 5269 |
Compatibilization of recycled poly(ethylene terephthalate) and polypropylene blends: Effect of compatibilization on blend toughness, dispersion of minor phase, and thermal stability
Inoya H, Leong YW, Klinklai W, Takai Y, Hamada H |
| 5270 - 5278 |
Characterizations on the amidized multiwalled carbon nanotubes grafted with polyaniline via in situ polymerization
Wu YJ, Chao L, Ho KS, Huang YJ, Huang YL, Yang CS, Tseng BH |
| 5279 - 5285 |
Engineering properties of compatibilized polypropylene/liquid crystalline polymer blends
Mandal PK, Siddhanta SK, Chakraborty D |
| 5286 - 5292 |
Surface organic modification of titanium dioxide fine particles through photo polymerization
Gao J, Yang M, Lei JX |
