| 3833 - 3841 |
Modulation of Food Texture Using Controlled Heteroaggregation of Lipid Droplets: Principles and Applications
Mao YY, McClements DJ |
| 3842 - 3848 |
Fabrication of Vertically Aligned Ferroelectric Polyvinylidene Fluoride Mesoscale Rod Arrays
Kim D, Hong S, Hong J, Choi YY, Kim J, Park M, Sung TH, No K |
| 3849 - 3861 |
Hyperbranched Polyhedral Oligomeric Silsesquioxane (HB-POSS) Nanomaterials for High Transmission and Radiation-Resistant Space and Solar Applications
Xu NT, Stark EJ, Carver PI, Sharps P, Hu J, Hartmann-Thompson C |
| 3862 - 3868 |
Microwave-Assisted Synthesis of Silver Nanoparticles on Cotton Fabric Modified with 3-Aminopropyltrimethoxysilane
Guo RH, Li YN, Lan JW, Jiang SX, Liu T, Yan WQ |
| 3869 - 3873 |
Hydrolyzable-Emulsifier-Containing Polymer Latices as Dispersants and Binders for Waterborne Carbon Black Paint
Itoh Y, Ozaki K, Maezawa R |
| 3874 - 3884 |
Hydrophobic and Oil-Resistant Coatings Based on Advanced Green Polyurethane Dispersions
Rengasamy S, Mannari V |
| 3885 - 3893 |
Modification of Disposable Screen-Printed Carbon Electrode Surfaces with Conductive Electrospun Nanofibers for Biosensor Applications
Ekabutr P, Chailapakul O, Supaphol P |
| 3894 - 3901 |
ANN Modeling in Pb(II) Removal from Water by Clay-Polymer Composites Fabricated via the Melt-Blending
Dlamini DS, Mishra AK, Mamba BB |
| 3902 - 3908 |
Graphene/Poly(styrene-b-isoprene-b-styrene) Nanocomposite Optical Actuators
Ansari S, Neelanchery MM, Ushus D |
| 3909 - 3918 |
Highly Filled Graphite Polybenzoxazine Composites for an Application as Bipolar Plates in Fuel Cells
Dueramae I, Pengdam A, Rimdusit S |
| 3919 - 3929 |
Poly(L-lactide)/Poly(D-lactide)/Multiwalled Carbon Nanotubes Nanocomposites: Enhanced Dispersion, Crystallization, Mechanical Properties, and Hydrolytic Degradation
Dong QL, Li Y, Han CY, Zhang X, Xu K, Zhang HL, Dong LS |
| 3930 - 3936 |
Structure Evolution of Ultra High Molecular Weight Polyethylene/Montmorillonite Nanocomposite Fibers Prepared by Melt Spinning
Zhang Q, Wang QZ, Chen Y |
| 3937 - 3946 |
Selective Adsorption of Au3+ from Aqueous Solutions Using Persimmon Powder-Formaldehyde Resin
Xie F, Fan ZJ, Zhang QL, Luo ZR |
| 3947 - 3951 |
Synergistic Effects of Carbon Nanotubes and Exfoliated Graphite Nanoplatelets for Electromagnetic Interference Shielding and Soundproofing
Kim MS, Yan J, Joo KH, Pandey JK, Kang YJ, Ahn SH |
| 3952 - 3960 |
Effect of Montmorillonoite Modification and Maleic Anhydride-Grafted Polypropylene on the Microstructure and Mechanical Properties of Polypropylene/Montmorillonoite Nanocomposites
Peng PP, Yang ZH, Wu MH, Zhang QL, Chen G |
| 3961 - 3971 |
Rheological Properties of Neat Epoxy Exposed to In-Service Aerospace Contaminants
Moffet ML, La Saponara V |
| 3972 - 3978 |
Curing Kinetics of Diglycidyl Ether of Bisphenol-A (n=0) Using an Iron-Containing Porphyrin as Cross-Linking Agent
Vazquez EC, Fraga F, Martinez-Ageitos JM, Tato JV |
| 3979 - 3984 |
Ultrasonic Treatment of Polyacrylic Acid Sodium/NaA Zeolite Hybrid Membranes for the Pervaporation Dehydration of Ethanol
Wei P, Qu XY, Dong H, Zhang L, Chen HL, Gao CJ |
| 3985 - 3992 |
Investigation into the Adsorption of a Commercial Coupling Agent for Polymers onto Pretreated Fly Ash Filler Particles
Velado D, Potgieter H, Liauw CM |
| 3993 - 4000 |
Temperature-Dependent Pyrolytic Product Evolution Profile for Polyethylene Terephthalate
Hujuri U, Ghoshal AK, Gumma S |
| 4001 - 4013 |
Online Conductivity and Stability in the Emulsion Polymerization of n-Butyl Methacrylate: Batch versus Semibatch Systems
Zhao FN, Sudol ED, Daniels ES, Klein A, El-Aasser MS |
| 4014 - 4023 |
Nanocomposites Based on Thermoplastic Polyurethane, Millable Polyurethane and Organoclay: Effect of Matrix Composition and Dynamic Vulcanization
Barick AK, Chang YW |
| 4024 - 4031 |
Study on Polybenzoxazinone Membrane in Pervaporation Processes
Pulyalina A, Polotskaya G, Goikhman M, Podeshvo I, Kalyuzhnaya L, Chislov M, Toikka A |
| 4032 - 4039 |
The Tribological Properties of Poly(p-phenylene benzobisoxazole) Pulp Reinforced Friction Materials
Liu RB, Li XX, Liu XY, Shen BB, Han ZW |
| 4040 - 4046 |
Synthesis and Evaluation of P(AM-b-DADMAC) as Fixative for Dissolved and Colloidal Substances
Wang LJ, Li GD, Zhang YQ, Xiao H |
| 4047 - 4053 |
Facile Preparation of Shape Memory Polyurethanes by Polyurethanes Blending
Yang SX, Yuan HM, Luo JL, Chen SJ, Ge ZC, Chen SG, Zheng JW |
| 4054 - 4065 |
Preparation of Chloromethylated and Aminated Gel-Type Poly(styrene-co-divinylbenzene) Microparticles with Controlled Degree of Functionalization
Rodrigo R, Toro CA, Cuellar J |
| 4066 - 4074 |
Preparation and Characterization of a Poly(vinyl alcohol)/Tetraethoxysilane Ultrafiltration Membrane by a Sol-Gel Method
Yuan HK, Ren J, Cheng L, Shen L |
| 4075 - 4080 |
Enhanced Mechanical and Thermal Properties of Biodegradable Poly(butylene succinate-co-adipate)/Graphene Oxide Nanocomposites via In Situ Polymerization
Zhou WD, Wang XW, Wang PL, Zhang W, Ji JH |
| 4081 - 4089 |
Graphene Nanoplatelet-Polyetherimide Composites: Revealed Morphology and Relation to Properties
Wu H, Drzal LT |
| 4090 - 4098 |
Preparation and Adsorption Properties of Diethylenetriamine-Modified Chitosan Beads for Acid Dyes
Yan YK, Xiang B, Li YJ, Jia Q |
| 4099 - 4106 |
Micropatterning of Polymethacrylates by Single- or Two-Photon Irradiation Using pi-Conjugated o-Nitrobenzyl Ester Phototrigger as Side Chains
Jin M, Xu HR, Hong H, Bao CY, Pu HT, Wan DC, Zhu LY |
| 4107 - 4112 |
Synthesis and Properties of Fluorine- and Siloxane-Containing Polybenzimidazoles for High Temperature Proton Exchange Membrane Fuel Cells
Hsu SLC, Lin YC, Tasi TY, Jheng LC, Shen CH |
| 4113 - 4118 |
Solvent Inducing Aggregates of Perylene Tetracarboxylic Diimide in Polymer Backbone
Kong F, Tang BW, Zhang XQ, Lin BP, Qiu T |
| 4119 - 4128 |
The Degradation and Charring of Flame Retarded Epoxy Resin During the Combustion
Zhang WC, Li XM, Yang RJ |
| 4129 - 4136 |
Effects of Nano-TiO2 on the Properties and Structures of Starch/Poly(epsilon-Caprolactone) Composites
Fei P, Shi YJ, Zhou M, Cai J, Tang SW, Xiong HG |
| 4137 - 4146 |
Thermosensitive Self-Assembly Micelles from A(2)BA(2)-Type Poly(N-isopropyl acrylamide)(2)-b-Poly(lactic acid)-b-Poly(N-isopropyl acrylamide)(2) Four-Armed Star Block Copolymers and Their Applications as Drug Carriers
Luo YL, Yang XL, Xu F, Chen YS, Ren-Ting ZM |
| 4147 - 4156 |
Effect of Drug Loading and Laser Surface Melting on Drug Release Profile from Biodegradable Polymer
Hsu ST, Yao YL |
| 4157 - 4164 |
Processing and Properties of Polypropylene-Based Composites Containing Inertized Fly Ash from Municipal Solid Waste Incineration
Besco S, Brisotto M, Gianoncelli A, Depero LE, Bontempi E, Lorenzetti A, Modesti M |
| 4165 - 4170 |
Dummy Template Molecularly Imprinted Polymer for Omeprazole and the Study of Its Drug Binding and Release Properties
Tabassi SAS, Hashemi SV, Mohajeri SA |
| 4171 - 4181 |
Cell Morphology and Mechanical Properties of Microcellular Mucell (R) Injection Molded Polyetherimide and Polyetherimide/Fillers Composite Foams
Li JL, Chen ZL, Wang XZ, Liu T, Zhou YF, Luo SK |
| 4182 - 4190 |
Spatially Resolved Monitoring of Crystalline Suprastructure and Molecular Orientation in alpha- and beta-Nucleated Polypropylene Pipes Using Differential Scanning Calorimetry, Infrared Microscopy, and Polarized Light Microscopy
Schuster T, Rode K, Brull R, Heinemann J, Haupt H |
| 4191 - 4200 |
Chemistry of the Interactions of Acetaldehyde Scavengers for Poly(ethylene terephthalate)
Mrozinski BA, Kim YW, Lofgren EA, Jabarin SA |
| 4201 - 4208 |
Synthesis of a Tung Oil-Rosin Adduct via the Diels-Alder Reaction: Its Reaction Mechanism and Properties in an Ultraviolet-Curable Adhesive
Wu JB, Zhang T, Ma GZ, Li P, Ling LX, Wang BJ |
| 4209 - 4218 |
Demonstrating the Mechanism and Efficacy of Water-Induced Shape Memory and the Influence of Water on the Thermal Properties of Oriented Poly(d,l-lactide)
Paakinaho K, Hukka TI, Kastinen T, Kellomaki M |
| 4219 - 4228 |
Multifactorial Design of Poly(D, L-lactic-co-glycolic acid) Capsules with Various Release Properties for Differently Sized Filling Agents
Schmitz-Hertzberg ST, Mak WC, Lai KK, Teller C, Bier FF |
| 4229 - 4236 |
Thermal and Mechanical Properties of Semi-Interpenetrating Polymer Networks Composed of Diisocyanate-Bridged, Four-Armed, Star-Shaped epsilon-Caprolactone Oligomers and Poly(epsilon-caprolactone)
Shibata M, Teramoto N, Hoshino K, Takase H, Shibita A |
| 4237 - 4244 |
Influence of Scaffold Forming Techniques on Stress Relaxation Behavior of Polycaprolactone Scaffolds
Sethuraman V, Makornkaewkeyoon K, Khalf A, Madihally SV |
| 4245 - 4254 |
Hydroxyl-Phosphazene-Wrapped Carbon Nanotubes and Its Application in Ethylene-Vinyl Acetate Copolymer
Zhang T, Du ZJ, Zou W, Li HQ, Zhang C |
| 4255 - 4263 |
Synergistic Effects of Tetrabutyl Titanate on Intumescent Flame-Retarded Polypropylene
Zheng AN, Xia Y, Li N, Mao ZW, Guan Y |
| 4264 - 4272 |
Transparent Poly(methyl methacrylate-co-butyl acrylate) Nanofibers
Avci MZ, Sarac AS |
| 4273 - 4283 |
Methodology for Development of New Active Barrier PET Copolymers
Mahajan K, Lofgren EA, Jabarin SA |
| 4284 - 4298 |
One-Pot Synthesized Poly(vinyl pyrrolidone-co-methyl methacrylate-co-acrylic acid) Blended with Poly(ether sulfone) to Prepare Blood-Compatible Membranes
Li J, Nie SQ, Wang LR, Sun SD, Ran F, Zhao CS |
| 4299 - 4307 |
dComparison of Covalent and Noncovalent Interactions of Carbon Nanotubes on the Crystallization Behavior and Thermal Properties of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)
Yu HY, Yao JM, Qin ZY, Liu L, Yang XG |
| 4308 - 4317 |
Mesoporous Silica Particles Grafted with Polystyrene Brushes as a Nucleation Agent for Polystyrene Supercritical Carbon Dioxide Foaming
Yang JT, Huang LQ, Zhang YF, Chen F, Zhong MQ |
| 4318 - 4326 |
Influence of Electron Beam Irradiation on the Mechanical and Thermal Properties of Polypropylene/Polyamide6 Blends
Nakamura S, Tokumitsu K, Yamaguchi T |
| 4327 - 4337 |
Polylactide Stereocomplex Crystallization Prompted by Multiwall Carbon Nanotubes
de Arenaza IM, Sarasua JR, Amestoy H, Lopez-Rodriguez N, Zuza E, Meaurio E, Meyer F, Santos JI, Raquez JM, Dubois P |
| 4338 - 4346 |
Influence of Partial Cross-Linking Degree on Basic Physical Properties of RTM6 Epoxy Resin
Moosburger-Will J, Greisel M, Sause MGR, Horny R, Horn S |
| 4347 - 4356 |
Mechanical and Thermal Properties of Compatibilized Polypropylene Reinforced by Woven Doum
Malha M, Nekhlaoui S, Essabir H, Benmoussa K, Bensalah MO, Arrakhiz FE, Bouhfid R, Qaiss A |
| 4357 - 4366 |
Effects of Copolymer Microstructure on the Properties of Electrospun Poly(L-lactide-co-epsilon-caprolactone) Absorbable Nerve Guide Tubes
Thapsukhon B, Thadavirul N, Supaphol P, Meepowpan P, Molloy R, Punyodom W |
| 4367 - 4374 |
Copolymers of Glycerol and Propylene Glycol Diglycidyl Ethers with Aromatic Dithiols
Kasetaite S, Ostrauskaite J, Grazuleviciene V, Svediene J, Bridziuviene D |
| 4375 - 4382 |
Investigation of a Postprocessing Method to Tailor the Mechanical Properties of Carbon Nanotube/Polyamide Fibers
Palardy G, Trudel-Boucher D, Hubert P |
| 4383 - 4391 |
Dual Application of Cryogel as Solid Support in Peptide Synthesis and Subsequent Protein-Capture
Jespersen GR, Nielsen AL, Matthiesen F, Andersen HS, Kirsebom H |
| 4392 - 4400 |
Aluminum Silicate Fibers Impregnated Acrylonitrile Butadiene Rubber Composites: Ablation, Thermal Transport/Stability, and Mechanical Inspection
Iqbal N, Sagar S, Khan MB, Bassyouni MI, Khan ZM |
| 4401 - 4409 |
Nanoindentation Response of Poly(ether ether ketone) Surfaces-A Semicrystalline Bimodal Behavior
Iqbal T, Briscoe BJ, Yasin S, Luckham PF |
| 4410 - 4418 |
Synthesis and Application Properties of Fluorinated Aromatic Copolymers
Ye HH, Li ZX, Chen GQ |
| 4419 - 4427 |
Thermal Aging of Bentonite-Filled Ethylene Propylene Diene Monomer Composites
Muniyadi M, Ismail H |
| 4428 - 4439 |
Cyclodextrin-Dendrimer Functionalized Polysulfone Membrane for the Removal of Humic Acid in Water
Malinga SP, Arotiba OA, Krause RWM, Mapolie SF, Diallo MS, Mamba BB |
| 4440 - 4448 |
Removal of Copper(II) Ions with a Thermoresponsive Cellulose-g-Poly(N-isopropyl acrylamide) Copolymer
Kasgoz H, Ozbas Z, Esen E, Sahin CP, Gurdag G |
| 4449 - 4456 |
Structure and Property Changes of Polyamide 6 During the Gel-Spinning Process
Zhang HM, Shi CM, He MM, Jia QX, Zhang LQ |
| 4457 - 4463 |
Plasticization Effect of Transgenic Soybean Oil. I. On Ethylene Propylene Diene Monomer (EPDM), as Substitute for Paraffin Oil
Wang Z, Han Y, Zhang X, Huang ZH, Zhang LQ |
| 4464 - 4473 |
Investigations on Clay Dispersion in Polypropylene/Clay Nanocomposites Using Rheological and Microscopic Analysis
Banerjee S, Joshi M, Ghosh AK |
| 4474 - 4481 |
A Comparative Study of Aging Characteristics and Thermal Stability of Oil Palm Ash, Silica, and Carbon Black Filled Natural Rubber Vulcanizates
Ooi ZX, Ismail H, Abu Bakar A |
| 4482 - 4489 |
Physical Properties of PVA Doped with Algal Glycerol
Allam M, Ayesh AI, Mohsin MA, Haik Y |
| 4490 - 4499 |
Effect of Air Gap on Gas Permeance/Selectivity Performance of BTDA-TDI/MDI CoPolyimide Hollow Fiber Membranes
Favvas EP, Papageorgiou SK, Nolan JW, Stefanopoulos KL, Mitropoulos AC |
| 4500 - 4507 |
C-13 NMR Study of Presence of Uron Structures in Amino Adhesives and Relation with Wood-Based Panels Performance
Costa NA, Martins D, Pereira J, Martins J, Ferra J, Cruz P, Mendes A, Magalhaes FD, Carvalho LH |
| 4508 - 4515 |
Morphology, Polymorphism, and Metal Ion Adsorption Studies of Electrospun Nanofibers Based on PVDF and Organically Modified Layered Double Hydroxide
Birajdar MS, Wanjale SD, Lonkar SP |
| 4516 - 4520 |
A Simple Route to Functionalize Siloxane Polymers for DMMP Sensing
Wang Y, Du XS, Li Y, Long Y, Qiu D, Tai HL, Tang XZ, Jiang YD |
| 4521 - 4527 |
Expansion of Core-Shell PS/PMMA Particles
Goncalves OH, Leimann FV, de Araujo PHH, Machado RAF |
| 4528 - 4533 |
Characterization and Anticorrosive Properties of Poly(2,3-dimethylaniline)/Na1-Montmorillonite Composite Prepared by Emulsion Polymerization
Ma L, Fu DD, Gan MY, Zhang F, Li ZT, Li S |
| 4534 - 4541 |
Effect of Bamboo Charcoal Powder on the Curing Characteristics, Mechanical Properties, and Thermal Properties of Styrene-Butadiene Rubber with Bamboo Charcoal Powder
Meng XH, Zhang YH, Lu JB, Zhang ZL, Liu LP, Chu PK |
| 4542 - 4550 |
Synthesis and Characterization of a Chitosan Ligand for the Removal of Copper from Aqueous Media
Reddy DHK, Lee SM |
| 4551 - 4557 |
Near-Infrared Activation of Semi-Crystalline Shape Memory Polymer Nanocomposites
Le DM, Tycon MA, Fecko CJ, Ashby VS |
| 4558 - 4567 |
HDPE-Fly Ash/Nano Fly Ash Composites
Satapathy S, Nando GB, Nag A, Raju KVSN |
| 4568 - 4575 |
Characterization of MAO-Modified Silicas for Ethylene Polymerization
Mortazavi MM, Ahmadjo S, Dos Santos JHZ, Arabi H, Nekoomanesh M, Zohuri GH, Brambilla R, Galland GB |
| 4576 - 4580 |
Plasticized Poly(lactic acid) with Low Molecular Weight Poly(ethylene glycol): Mechanical, Thermal, and Morphology Properties
Chieng BW, Ibrahim NA, Yunus WMZW, Hussein MZ |
| 4581 - 4586 |
Fabrication and Characterization of Electrospun Sulfonated Poly(phthalazinone ether ketone) Mats as Potential Matrix of Reinforced Proton Exchange Membranes
Zhang HW, Yu F, Zuo DY |
| 4587 - 4597 |
Effects of Blending Time and Catalyst on the Properties of Nylon 1010/Acrylate Rubber Blends
Lu XB, Zhang HM, Zhang Y |
| 4598 - 4607 |
TAT-Modified Mixed Micelles as Biodegradable Targeting and Delivering System for Cancer Therapeutics
Li XY, Wang MZ, Liu CB, Jing XB, Huang YB |
| 4608 - 4612 |
Lightly Branched Poly(vinyl alcohol) for Fluid Loss Additive
Han HF, Zhang JH |
| 4613 - 4613 |
Drug Release Properties of Poly(vinyl pyrrolidone)/Acrylic Acid Copolymer Hydrogels (vol 120, pg 3484, 2011)
Alarifil AS |
| 4614 - 4614 |
Recent Progress in Interfacial Toughening and Damage Self-Healing of Polymer Composites Based on Electrospun and Solution-Blown Nanofibers: An Overview (vol 130, pg 2225, 2013)
Wu XF, Yarin AL |
