| 2511 - 2516 |
New side-chain liquid-crystalline ionomers. I. Synthesis and characterization of a homopolymer derived from ionic mesogenic groups
Zang BL, Hu JS, Meng FB, Zhang BY |
| 2517 - 2520 |
Photocontrol of the refractive index of poly(methyl methacrylate) with a nitrone additive
Tanaka K, Shima K, Kondoh H, Igarashi T, Sakurai T |
| 2521 - 2527 |
Properties of acrylonitrile-butadiene-styrene/polycarbonate blends with styrene-butadiene-styrene block copolymer
Tasdemir M |
| 2528 - 2531 |
Preparation and characterization of conductive latex based on polyaniline-perlite composite
Arsalani N, Hayatifar M |
| 2532 - 2541 |
Preparation and properties of a salt-resistant superabsorbent polymer
Ma SM, Liu MZ, Chen ZB |
| 2542 - 2549 |
Study of polyethylene solution fractionation and resulting fractional crystallization behavior
Kong J, Fan XD, Jia M |
| 2550 - 2558 |
Preparation and characterization of chitosan based micro networks: Transposition to a prilling process
Martinez L, Agnely F, Bettini R, Besnard M, Colombo P, Couarraze G |
| 2559 - 2569 |
Syntheses and properties of low-level melamine-modified urea-melamine-formaldehyde resins
No BY, Kim MG |
| 2570 - 2578 |
Wood-Fiber/High-Density-Polyethylene composites: Compounding process
Lu JZ, Wu Q, Negulescu II |
| 2579 - 2589 |
Synthesis and characterization of acrylic rubber/silica hybrid composites prepared by sol-gel technique
Bandyopadhyay A, Bhowmick AK, De Sarkar M |
| 2590 - 2596 |
Biodegradable polymers. III. Spectral, thermal, mechanical, and morphological properties of cross-linked furfural-soy protein concentrate
Swain SN, Rao KK, Nayak PL |
| 2597 - 2605 |
Copolymerization of ethylene-propylene using high-activity Bi-supported Ziegler-Natta TiCl4 catalyst
Zohuri GH, Mortazavi MM, Jamjah R, Ahmadjo S |
| 2606 - 2621 |
Mechanical and aging properties of cross-linked ethylene propylene diene rubber styrene butadiene rubber blends
Nair TM, Kumaran MG, Unnikrishnan G |
| 2622 - 2626 |
Viscosity behavior of acrylonitrile-ammonium itaconate copolymer solutions in dimethyl sulfoxide
Hou C, Ying L, Wang CG |
| 2627 - 2633 |
Biodegradable packaging foams of starch acetate blended with corn stalk fibers
Ganjyal GM, Reddy N, Yang YQ, Hanna MA |
| 2634 - 2641 |
Contraction stress build-up of anisotropic conductive films (ACFs) for flip-chip interconnection: Effect of thermal and mechanical properties of ACFs
Kwon WS, Paik KW |
| 2642 - 2649 |
New liquid polysulfide polymer terminated with silyl group
Matsui T, Nakajima M, Nonaka T, Dokoshi N |
| 2650 - 2663 |
Characterization of crosslinked starch materials with spectroscopic techniques
Delval F, Crini G, Bertini S, Morin-Crini N, Badot PM, Vebrel JL, Torri G |
| 2664 - 2668 |
Modeling the tensile behavior of fiber bundles with irregular constituent fibers
He WW, Wang XG |
| 2669 - 2677 |
Cu(II)-incorporated histidine-containing, magnetic-metal-complexing beads as specific sorbents for the metal chelate affinity of albumin
Akgol S, Turkmen D, Denizli A |
| 2678 - 2687 |
Poly(phenylene ether)/epoxy thermoset blends based on anionic polymerization of epoxy monomer
Prolongo SG, Cabanelas JC, Fine T, Pascault JP |
| 2688 - 2698 |
Predicting solubility and permeation properties of organic solvents in viton glove material using Hansen's solubility parameters
Evans KM, Hardy JK |
| 2699 - 2703 |
Novel Diols containing ester and amide groups and resulting poly(ester amide ester)s
Mehdipour-Ataei S, Einollahy P |
| 2704 - 2710 |
Effect of ammonia on madder-dyed natural protein fiber
Montazer M, Parvinzadeh M |
| 2711 - 2720 |
The dispersion behavior of clay particles in poly(L-lactide)/organo-modified montmorillonite hybrid systems
Nam PH, Fujimori A, Masuko T |
| 2721 - 2730 |
Physical, mechanical, and thermal properties of PVC/PMMA blends in relation to their morphologies
Chakrabarti R, Das M, Chakraborty D |
| 2731 - 2743 |
New insights into the degradation mechanism of poly (vinyl chloride), based on the action of novel costabilizers. I.
Santamaria E, Edge M, Allen NS, Harvey HB, Mellor M, Orchison J |
| 2744 - 2763 |
New insights into the degradation mechanism of poly(vinyl chloride), -Part II. Limited polyene sequence length during degradation and Synergism between costabilizers
Santamaria E, Edge M, Allen NS, Harvey HB, Mellor M, Orchison J |
| 2764 - 2774 |
Engineering properties of novolac resin-PMMA{poly(methyl methacrylate)} IPN system
Goswami S, Chakrabarty D |
| 2775 - 2780 |
Synthesis and characterization of Konjac glucomannan/poly(vinyl alcohol) interpenetrating polymer networks
Li B, Xie BJ |
| 2781 - 2789 |
A new secondary accelerator for the sulfur vulcanization of natural rubber latex and its effect on the rheological properties
Kurien M, Claramma NM, Kuriakose AP |
| 2790 - 2801 |
New tetrafunctional epoxy resin system with increased shelf life
Jagadeesh KS, Shashikiran K |
| 2802 - 2807 |
Maleic acid grafting on low density polyethylene
Singh SK, Tambe SP, Samui AB, Kumar D |
| 2808 - 2814 |
A simple sulfuric acid pretreatment method to improve the adsorption of Cr(VI) by chitosan
Lasko CL, Adams KH, DeBenedet EM, West PA |
| 2815 - 2820 |
Poly(methyl methacrylate) nanoparticles prepared through microwave emulsion polymerization
Bao JJ, Zhang AM |
| 2821 - 2829 |
Hydraulic resistance of rigid polyurethane foams. I. Effect of different surfactants on foam structure and properties
Mondal P, Khakhar DV |
| 2830 - 2837 |
Hydraulic resistance of rigid polyurethane foams. II. Effect of variation of surfactant, water, and nucleating agent concentrations on foam structure and properties
Mondal P, Khakhar DV |
| 2838 - 2843 |
Hydraulic resistance of rigid polyurethane foams. III. Effect of variation of the concentration of catalysts on foam structure and properties
Mondal P, Khakhar DV |
| 2844 - 2855 |
Isothermal and nonisothermal crystallization kinetics of MC nylon and polyazomethine/MC nylon composites
Qu XW, Ding HL, Lu JY, Wang YX, Zhang LC |
| 2856 - 2865 |
Shear rheological properties of acrylic copolymers and terpolymers suitable for potentially melt processable carbon fiber precursors
Bortner MJ, Bhanu V, McGrath JE, Baird DG |
| 2866 - 2878 |
Influence of processing on ethylene-propylene block copolymers: Structure and mechanical behavior
Maspoch ML, Gamez-Perez J, Gimenez E, Santana OO, Gordillo A |
| 2879 - 2882 |
Copolymers derived from bismaleimide oligomer with active solvent
Wang Z, Deng PY, Gao LX, Ding MX |
| 2883 - 2888 |
Solid polymer electrolytes based on nanocomposites of ethylene oxide-epichlorohydrin copolymers and cellulose whiskers
Schroers M, Kokil A, Weder C |
| 2889 - 2895 |
UV curable pressure-sensitive adhesives for fabricating semiconductors. II. The effect of functionality of acrylate monomers on the adhesive properties
Horigome K, Ebe K, Kuroda S |
| 2896 - 2902 |
Mechanical properties and water vapor permeability of thin film from corn hull arabinoxylan
Zhang PY, Whistler RL |
| 2903 - 2908 |
Application of enzymes and chitosan biopolymer to the antifelting finishing process
Onar N, Sariisik M |
| 2909 - 2917 |
The effect of varied monomer composition on adhesive performance and peeling master curves for acrylic pressure-sensitive adhesives
Gower MD, Shanks RA |
| 2918 - 2925 |
Thermal strain of high strength polyethylene fiber in low temperature
Yamanaka A, Kitagawa T, Tsutsumi M, Kashima T, Fujishiro H, Ema K, Izumi Y, Nishijima S |
| 2926 - 2933 |
Enhancing the strength of polypropylene fibers with carbon nanotubes
Moore EM, Ortiz DL, Marla VT, Shambaugh RL, Grady BP |
