| 1049 - 1057 |
Properties of Chelating Resins Prepared by Addition of 1,4,8,11-Tetraazacyclotetradecane-5,7-Dione to Epoxy Groups of Poly(Glycidyl Methacrylate)S Cross-Linked with Oligoethylene Glycol Dimethacrylates
Jyo A, Sassa M, Egawa H |
| 1059 - 1065 |
Novel Functional Polymers - Poly(Dimethylsiloxane)Polyamide Multiblock Copolymer .3. Synthesis and Surface-Properties of Disiloxane-Aromatic Polyamide Multiblock Copolymer
Furuzono T, Seki K, Kishida A, Ohshige TA, Waki K, Maruyama I, Akashi M |
| 1067 - 1071 |
Novel Functional Polymers - Poly(Dimethylsiloxane)Polyamide Multiblock Copolymer .4. Gas-Permeability and Thermomechanical Properties of Aramid-Silicone Resins
Matsumoto T, Koinuma Y, Waki K, Kishida A, Furuzono T, Maruyama I, Akashi M |
| 1073 - 1086 |
Precipitation of Ferrites in Nafion(R) Membranes
Raymond L, Revol JF, Ryan DH, Marchessault RH |
| 1087 - 1098 |
Structure and Properties of Talc-Filled Polypropylene - Effect of Phosphate Coating
Liu Z, Gilbert M |
| 1099 - 1105 |
Shear-Stress from Rate-Dependent and Nonaffine Network Models for Melts in Complex Shear Histories
Xu YZ, Fong CF, Kee DD |
| 1107 - 1116 |
Strengths and Limitations of SAFT for Calculating Polar Copolymer-Solvent Phase-Behavior
Hasch BM, Lee SH, McHugh MA |
| 1117 - 1128 |
Morphology and Mechanical-Properties of Blends of Isotactic or Syndiotactic Polypropylene with Sebs Block-Copolymers
Setz S, Stricker F, Kressler J, Duschek T, Mulhaupt R |
| 1129 - 1135 |
Polycarbonate/(N,N’-Dialicylidene Ethylene Diamine)Cobalt(II) Complex Membrane for Gas Separation
Chen SH, Lai JY |
| 1137 - 1143 |
Effects of Surface Treatments of Superdrawn Polyoxymethylene Fibers on Adhesion to Epoxy-Resins
Komatsu T |
| 1145 - 1149 |
Accelerated Weathering-Induced Degradation of Unprotected Multilayer Polyethylene Slabs .2.
Yanai G, Ram A, Miltz J |
| 1151 - 1158 |
Surface-Morphology of Homogeneous and Asymmetric Membranes Made from Poly(Phenylene Oxide) by Tapping Mode Atomic-Force Microscope
Khulbe KC, Kruczek B, Chowdhury G, Gagne S |
| 1159 - 1166 |
Effect of Physical Aging on Phenolphthalein Polyethersulfone/Poly(Phenylene Sulfide) Blend .1. Mechanical-Properties
Yang YM, Damore A, Di YW, Nicolais L, Li BY |
| 1167 - 1171 |
Influence of the Composition of Rosin-Based Rigid Polyurethane Foams on Their Thermal-Stability
Zhang Y, Shang S, Zhang X, Wang D, Hourston DJ |
| 1173 - 1180 |
Characterization of Cathodes for Rechargeable Lithium Batteries Based on New Vanadium-Oxides and Peo/Ppz Polymer Blends
Luque JL, Bergas EM, Egea JR |
| 1181 - 1190 |
Industrial Plasticizing Dispersion AIDS for Cement-Based on Polyflavonoid Tannins
Kaspar HR, Pizzi A |
| 1191 - 1194 |
Hydrogen-Peroxide Initiated Crafting of Acrylamide Onto Poly(Ethylene-Terephthalate) Fibers in Benzyl Alcohol
Sacak M, Celik M |
| 1195 - 1197 |
Increase of Mechanical Strength of Hydroxy-Terminated Polybutadiene by Adding Small Amounts of Carbon-Black
Sanden R, Stenberg B |
| 1199 - 1202 |
Synthesis and Thermal-Analysis of Copolyesters Deriving from 1,4-3,6-Dianhydrosorbitol, Ethylene-Glycol, and Terephthalic Acid
Storbeck R, Ballauff M |
