1 - 7 |
Strontium and zoledronate hydroxyapatites graded composite coatings for bone prostheses Boanini E, Torricelli P, Sima F, Axente E, Fini M, Mihailescu IN, Bigi A |
8 - 16 |
Mechanical properties of a waterborne pressure-sensitive adhesive with a percolating poly(acrylic acid)-based diblock copolymer network: Effect of pH Gurney RS, Morse A, Siband E, Dupin D, Armes SP, Keddie JL |
17 - 23 |
Facile fabrication of highly efficient g-C3N4/BiFeO3 nanocomposites with enhanced visible light photocatalytic activities Wang XF, Mao WW, Zhang J, Han YM, Quan CY, Zhang QX, Yang T, Yang JP, Li XA, Huang W |
24 - 31 |
Microscopic structure and properties of discrete water layer in Na-exchanged montmorillonite Emmerich K, Koeniger F, Kaden H, Thissen P |
32 - 40 |
Removal of fluoxetine from water by adsorbent materials produced from paper mill sludge Jaria G, Calisto V, Gil MV, Otero M, Esteves VI |
41 - 50 |
Carbon-supported ionic liquids as innovative adsorbents for CO2 separation from synthetic flue-gas Erto A, Silvestre-Albero A, Silvestre-Albero J, Rodriguez-Reinoso F, Balsamo M, Lancia A, Montagnaro F |
51 - 56 |
Powder wettability at a static air-water interface Dupas J, Forny L, Ramaioli M |
57 - 64 |
Preparation of core-shell mesoporous silica nanoparticles with bimodal pore structures by regrowth method Ishii H, Ikuno T, Shimojima A, Okubo T |
65 - 72 |
Abatement of aqueous anionic contaminants by thermo-responsive nanocomposites: (Poly(N-isopropylacrylamide))-co-silylanized Magnesium/Aluminun layered double hydroxides Chen H, Qian GR, Ruan XX, Frost RL |
73 - 78 |
Effect of charge balance and dosage of polyelectrolyte complexes on the shear resistance of mineral floc strength and reversibility Korhonen MHJ, Rojas OJ, Laine J |
79 - 87 |
Highly efficient, long life, reusable and robust photosynthetic hybrid core-shell beads for the sustainable production of high value compounds Desmet J, Meunier C, Danloy E, Duprez ME, Lox F, Thomas D, Hantson AL, Crine M, Toye D, Rooke J, Su BL |
88 - 99 |
Adsorption of cationic polyacrylamide at the cellulose-liquid interface: A neutron reflectometry study Su JL, Garvey CJ, Holt S, Tabor RF, Winther-Jensen B, Batchelor W, Garnier G |
100 - 105 |
The dependence of phase change enthalpy on the pore structure and interfacial groups in hydrated salts/silica composites via sol-gel Wu YP, Wang T |
106 - 113 |
Green synthesis of Pd/CuO nanoparticles by Theobroma cacao L. seeds extract and their catalytic performance for the reduction of 4-nitrophenol and phosphine-free Heck coupling reaction under aerobic conditions Nasrollahzadeh M, Sajadi SM, Rostami-Vartooni A, Bagherzadeh M |
114 - 122 |
Formation of transparent solid lipid nanoparticles by microfluidization: Influence of lipid physical state on appearance Helgason T, Salminen H, Kristbergsson K, McClements DJ, Weiss J |
123 - 129 |
Light diffusing films fabricated by strawberry-like PMMA/SiO2 composite microspheres for LED application Guo S, Zhou SX, Li HJ, You B |
130 - 139 |
A novel and green process for the production of tin oxide quantum dots and its application as a photocatalyst for the degradation of dyes from aqueous phase Bhattacharjee A, Ahmaruzzaman M |
140 - 147 |
A synthetically modified hydrophobin showing enhanced fluorous affinity Milani R, Pirrie L, Gazzera L, Paananen A, Baldrighi M, Monogioudi E, Cavallo G, Linder M, Resnati G, Metrangolo P |
148 - 155 |
Free-standing carbon nanotube-titania photoactive sheets Koo Y, Malik R, Alvarez N, Shanov VN, Schulz M, Sankar J, Yun Y |
156 - 162 |
Deposition of zwitterionic polymer brushes in a dense gas medium Puniredd SR, Jayaraman S, Gandhimathi C, Ramakrishna S, Venugopal JR, Yeo TW, Guo SF, Quintana R, Janczewski D, Srinivasan MP |
163 - 174 |
In situ generation of hydroxyl radical by cobalt oxide supported porous carbon enhance removal of refractory organics in tannery dyeing wastewater Karthikeyan S, Boopathy R, Sekaran G |
175 - 179 |
Physical mechanisms of interaction of cold plasma with polymer surfaces Bormashenko E, Whyman G, Multanen V, Shulzinger E, Chaniel G |
180 - 188 |
Morphological transition of a conductive molecular organization with non-covalent from nanonetwork to nanofiber Fujimori A, Yamato R, Kikkawa T, Tatewaki Y |
189 - 196 |
One-pot synthesis of C-18-functionalized core-shell magnetic mesoporous silica composite as efficient sorbent for organic dye Zhang XL, Zeng T, Wang SH, Niu HY, Wang XK, Cai YQ |
197 - 207 |
Adsorption of hyaluronic acid on solid supports: Role of pH and surface chemistry in thin film self-assembly Choi JH, Kim SO, Linardy E, Dreaden EC, Zhdanov VP, Hammond PT, Cho NJ |
208 - 214 |
Template synthesis of hollow silver hexapods using hexapod-shaped silver oxide mesoparticles Jo J, Cho SP, Lim JK |
215 - 221 |
A new plasmonic device made of gold nanoparticles and temperature responsive polymer brush on a silicon substrate Zengin A, Tamer U, Caykara T |
222 - 230 |
Structure interfacial properties relationship and quantification of the amphiphilicity of well-defined ionic and non-ionic surfactants using the PIT-slope method Ontiveros JF, Pierlot C, Catte M, Molinier V, Salager JL, Aubry JM |
231 - 237 |
The correlation between fibronectin adsorption and attachment of vascular cells on heparinized polycaprolactone membrane Sun MC, Deng J, Gao CY |
238 - 250 |
Lead sorptive removal using magnetic and nonmagnetic fast pyrolysis energy cane biochars Mohan D, Singh P, Sarswat A, Steele PH, Pittman CU |
251 - 256 |
Palladium nanoparticles decorated on activated fullerene modified screen printed carbon electrode for enhanced electrochemical sensing of dopamine Palanisamy S, Thirumalraj B, Chen SM, Ali MA, Al-Hemaid FMA |
257 - 264 |
Detection of DNA utilizing a fluorescent reversible change of a biosensor based on the electron transfer from quantum dots to polymyxin B sulfate Wang LL, Liu SP, Liang WJ, Li D, Yang JD, He YQ |
265 - 274 |
Comparison of the enhanced gas sensing properties of tin dioxide samples doped with different catalytic transition elements Yang FC, Guo ZG |
275 - 279 |
Microfluidic generation of uniform water droplets using gas as the continuous phase Jiang KQ, Lu AX, Dimitrakopoulos P, Devoe DL, Raghavan SR |
280 - 286 |
Concentration-driven phase control for low temperature synthesis of phase-pure anatase and rutile titanium oxide Wang ZF, Xiao CY, Yamada S, Yoshinaga K, Bu XR, Zhang M |
287 - 296 |
Buckling of particle-laden interfaces Kassuga TD, Rothstein JP |
297 - 305 |
Separation of dielectric Janus particles based on polarizability-dependent induced-charge electroosmotic flow Zhang F, Li DQ |
306 - 314 |
Influence of the electrostatic interactions in a Pickering emulsion polymerization for the synthesis of silica-polystyrene hybrid nanoparticles du Sorbier QM, Aimable A, Pagnoux C |
315 - 319 |
Enhancing performance of P3HT:TiO2 solar cells using doped and surface modified TiO2 nanorods Tu YC, Lim H, Chang CY, Shyue JJ, Su WF |
320 - 330 |
Synthesis, characterization and DFT-modeling of novel agents for the protection and restoration of historical calcareous stone substrates Maiore L, Aragoni MC, Carcangiu G, Cocco O, Isaia F, Lippolis V, Meloni P, Murru A, Tuveri E, Arca M |
331 - 338 |
Effects of pH, dissolved oxygen, and aqueous ferrous iron on the adsorption of arsenic to lepidocrocite Wang L, Giammar DE |
339 - 346 |
Interaction of Moringa oleifera seed protein with a mineral surface and the influence of surfactants Kwaambwa HM, Hellsing MS, Rennie AR, Barker R |
347 - 355 |
Competitive adsorption of heavy metal ions on carbon nanotubes and the desorption in simulated biofluids Ma X, Yang ST, Tang H, Liu YF, Wang HF |
356 - 366 |
Dependence of capillary forces on relative humidity and the surface properties of femtosecond laser micromachined titanium Lehr J, Kietzig AM |
367 - 373 |
Self-assembly and template-free synthesis of ZnO hierarchical nanostructures and their photocatalytic properties Zhou HS, Zhang HJ, Wang Y, Miao Y, Gu LB, Jiao Z |
374 - 379 |
Ferrocene-containing thixotropic molecular gels: Creation and a novel strategy for water purification Yan JL, Liu J, Lei HR, Kang Y, Zhao C, Fang Y |
380 - 388 |
Versatile antifouling polyethersulfone filtration membranes modified via surface grafting of zwitterionic polymers from a reactive amphiphilic copolymer additive Zhao YF, Zhang PB, Sun J, Liu CJ, Yi Z, Zhu LP, Xu YY |
389 - 397 |
Studies of heavy metal ion adsorption on Chitosan/Sulfydryl-functionalized graphene oxide composites Li XY, Zhou HH, Wu WQ, Wei SD, Xu Y, Kuang YF |
398 - 406 |
Design, synthesis, and physico-chemical interactions of bile acid derived dimeric phospholipid amphiphiles with model membranes Kumar S, Bhargava P, Sreekanth V, Bajaj A |
407 - 416 |
Preparation of AgI sensitized amorphous TiO2 as novel high-performance photocatalyst for environmental applications Wang Q, Chen MM, Zhu NX, Shi XD, Jin H, Zhang Y, Cong YQ |
417 - 426 |
New insight into the promoting role of process on the CeO2-WO3/TiO2 catalyst for NO reduction with NH3 at low-temperature Zhang SL, Zhong Q, Shen YG, Zhu L, Ding J |
427 - 436 |
Improvement of the interfacial compatibility between cellulose and poly(L-lactide) films by plasma-induced grafting of L-lactide: The evaluation of the adhesive properties using a peel test Couturaud B, Baldo A, Mas A, Robin JJ |
437 - 450 |
The range of validity of sorption kinetic models Douven S, Paez CA, Gommes CJ |
451 - 459 |
Highly effective adsorption of cationic and anionic dyes on magnetic Fe/Ni nanoparticles doped bimodal mesoporous carbon Liu YY, Zeng GM, Tang L, Cai Y, Pang Y, Zhang V, Yang G, Zhou YY, He XX, He Y |
460 - 466 |
Enhanced photo-Fenton degradation of rhodamine B using graphene oxide-amorphous FePO4 as effective and stable heterogeneous catalyst Guo S, Zhang G, Yu JC |
467 - 472 |
Simple preparation of lotus-root shaped meso-/macroporous TiO2 and their DSSC performances Hone JY, Bae SE, Won YS, Huh S |
473 - 481 |
Assessment and modelling of Ni(II) retention by an ion-imprinted polymer: Application in natural samples Lenoble V, Meouche W, Laatikainen K, Garnier C, Brisset H, Margaillan A, Branger C |
482 - 491 |
Superhydrophobicity: Cavity growth and wetting transition Wahlander M, Hansson-Mille PM, Swerin A |
492 - 500 |
Effect of electrostatic interactions on rejection of capsular and spherical particles from porous membranes: Theory and experiment Agasanapura B, Baltus RE, Tanneru CT, Chellam S |
501 - 507 |
Design and characterization of a composite material based on Sr(II)-loaded clay nanotubes included within a biopolymer matrix Del Buffa S, Bonini M, Ridi F, Severi M, Losi P, Volpi S, Al Kayal T, Soldani G, Baglioni P |
508 - 516 |
Kinetic, isotherm and thermodynamic investigations of phosphate adsorption onto core-shell Fe3O4@LDHs composites with easy magnetic separation assistance Yan LG, Yang K, Shan RR, Yan T, Wei J, Yu SJ, Yu HQ, Du B |
517 - 524 |
Porous ZrxSi1-xO2 shell/void/TiO2 core particles with enhancing transfer for cleaning water Zhang YQ, Zhang YG |
525 - 532 |
TiO2 incorporated in magnetic mesoporous SBA-15 by a facile inner-pore hydrolysis process toward enhanced adsorption photocatalysis performances for As(III) Yu L, Yang XF, Wang DS |
533 - 544 |
Equilibrium orientations of non-spherical and chemically anisotropic particles at liquid-liquid interfaces and the effect on emulsion stability Ballard N, Bon SAF |
545 - 552 |
Surface silylation of natural mesoporous/macroporous diatomite for adsorption of benzene Yu WB, Deng LL, Yuan P, Liu D, Yuan WW, Liu P, He HP, Li ZH, Chen FR |
553 - 563 |
Precipitation mechanism of amorphous silica nanoparticles: A simulation approach Noguera C, Fritz B, Clement A |
564 - 572 |
Hierarchical Bi based nanobundles: An excellent photocatalyst for visible-light degradation of Rhodamine B dye Gao FF, Zhao Y, Li YW, Wu GJ, Lu WY, Song YC, Huang ZF, Li N, Zhao JZ |
573 - 581 |
Removal of hydrogen sulfide at ambient conditions on cadmium/GO-based composite adsorbents Florent M, Wallace R, Bandosz TJ |
582 - 592 |
Synthesis and thermal stability of zirconia and yttria-stabilized zirconia microspheres Leib EW, Vainio U, Pasquarelli RM, Kus J, Czaschke C, Walter N, Janssen R, Muller M, Schreyer A, Weller H, Vossmeyer T |
593 - 593 |
A comment on "pH and the surface tension of water" (J. K. Beattie, A. M. Djerdjev, A. Gray-Weale, N. Kallay, J. Lutzenkirchen, T. Preocanin, A. Selmani, J. Colloid Interface Sci. 422 (2014) 54.) Jungwirth P, Tobias DJ |
594 - 595 |
Response to Comment on "James K. Beattie, Alex M. Djerdjev, Angus Gray-Weale, Nikola Kallay, Johannes Lutzenkirchen, Tajana Preocanin, Atida Selmani, pH and the surface tension of water" [J. Colloid Interface Sci. 422 (1) (2014), 54-58] Beattie JK, Djerdjev AM, Kallay N, Preocanin T, Lutzenkirchen J |