| 1 - 10 |
Chemical Interaction During the Chemical-Vapor-Deposition of Silicon-Carbide on Aluminosilicate Fibers from Halogenated Precursors
Vincent C, Scharff JP, Vincent H, Bouix J, Lofti N, Kannan TS |
| 11 - 14 |
Antimicrobial and Antifungal Agents Derived from Clay-Minerals .5. Montmorillonite and Saponite Containing Some Antimicrobial Ammonium-Ions
Oya A, Funato Y, Sugiyama K |
| 15 - 25 |
Coarsening of Delta’ (Al3Li) and Composite Precipitates in an Al-2.5-Percent Li-0.15-Percent Zr Alloy
Aydinol MK, Bor AS |
| 26 - 32 |
Deformation Mechanism in Alpha-Cu-Al Single-Crystals with a Spherical Indentor
Kobayashi S, Harada T, Miura S |
| 33 - 38 |
Fiber-Matrix Interfacial Failure Sequences in Translaminar Flexure of Glass Epoxy Composites
Padmanabhan K, Kishore |
| 39 - 46 |
Environmental-Stress Cracking of PVC and PVC-Cpe .2. Failure Mechanisms
Breen J |
| 47 - 53 |
Some Aspects of Crack Initiation in Mild-Steel Under Corrosion-Fatigue Condition
Ray GP, Jarman RA, Thomas JG |
| 54 - 60 |
Effect of Ti(C,N) Addition on Sintering Behavior and Properties of Binder-Modified WC-10Co Cemented Carbide
Bhaumik SK, Upadhyaya GS, Vaidya ML |
| 61 - 66 |
Combined Equilibrium and Nonequilibrium Segregation Mechanism of Temper Embrittlement
Song SH, Xu TD |
| 67 - 72 |
Crystallization of Nickel-Bearing Stoichiometric Cordierite Glasses
Boberski C, Giess EA |
| 73 - 79 |
Thermally Stimulated Discharge Currents in Corona-Charged Aramid Paper
Sussi MA, Raju GR |
| 80 - 90 |
Effect of Magnesium Content and Metal Vanadate Formation on the Catalytic Behavior of Cu1.0-X-Mgx-V2.0 Oxide Vanadate (O.0-Less-Than-or-Equal-to-X-Less-Than-or-Equal-to-1.0) System
Girgis MM |
| 91 - 98 |
The Effect of the Loading Rate on the Fracture-Toughness of Poly(Methyl Methacrylate), Polyacetal, Polyetheretherketone and Modified PVC
Beguelin PH, Kausch HH |
| 99 - 102 |
Preparation of YBCO Superconductor Thin-Film by Spin-Coating Method with Metal-Organic Precursors
Fang SC, Huang CH, Chen IC, Liaw CF, Hurng WM |
| 103 - 109 |
Cadmium-Oxide Whisker Crystals Grown by the Vapor Liquid-Solid Mechanism Using Various Elements as Growth Initiators
Koparanova N, Zlatev Z, Genchev D, Popovich G |
| 110 - 120 |
Optimization of the Interfaces in Nicalon-Fiber-Reinforced-ALPO-Matrix Composite-Materials
Fishkis M, Yeh JR, Wefers K |
| 121 - 124 |
Sintering Characteristics of Microfine Zirconia Powder
Jiang XX, Huang DS, Weng LQ |
| 125 - 128 |
Mechanical-Properties and Thermal-Expansion Behavior in Leucite Containing Materials
Sheu TS, Obrien WJ, Rasmussen ST, Tien TY |
| 129 - 135 |
Coloration of Molten Aluminum Surface in Various Atmospheres
Sata T |
| 136 - 140 |
Microstructural Development of the Isothermal Phase-Transformation During Aging at 250-Degrees-C in 2Y-TZP Ceramics
Lee JK, Hwan K |
| 141 - 150 |
A Generalized Law of Mixtures
Fan Z, Tsakiropoulos P, Miodownik AP |
| 151 - 156 |
Property Modification of Polyethylene Tapes by Acetylene-Sensitized Gamma-Irradiation
Appleby RW, Busfield WK |
| 157 - 163 |
Mechanical Selection of Foams and Honeycombs Used for Packaging and Energy-Absorption
Zhang J, Ashby MF |
| 164 - 168 |
Mechanical-Properties of (Y-TZP)-Alumina Silicon-Carbide Nanocomposites and the Phase-Stability of Y-TZP Particles in It
Niihara K, Unal N, Nakahira A |
| 169 - 174 |
Kinetics of Nucleation and Growth .2. Diffusion-Controlled Growth
Frade JR |
| 175 - 178 |
Electrical-Properties of Si4+ Substituted Copper Ferrite
Patil BL, Sawant SR, Patil SA, Patil RN |
| 179 - 183 |
Obtention of Highly Dispersed Platelet-Reinforced Al2O3 Composites
Belmonte M, Moreno R, Moya JS, Miranzo P |
| 184 - 188 |
The Effects of Trichloroethane Hci and Ion-Implantation on the Oxidation Rate of Silicon
Ahmed W, Ahmed E |
| 189 - 202 |
Single-Fiber Polymer Composites .1. Interfacial Shear-Strength and Stress-Distribution in the Pull-Out Test
Li ZF, Grubb DT |
| 203 - 212 |
Single-Fiber Polymer Composites .2. Residual-Stresses and Their Effects in High-Modulus Polyethylene Fiber Composites
Grubb DT, Li ZF |
| 213 - 217 |
Heat Transmission During Thermal-Shock Testing of Ceramics
Nishikawa T, Gao T, Hibi M, Takatsu M, Ogawa M |
| 218 - 226 |
Precipitate Structure in a Cu-Ni-Si Alloy
Lockyer SA, Noble FW |
| 227 - 231 |
Post-Gamma Irradiation Cross-Linking of Polyethylene Tape by Acetylene Treatment
Appleby RW, Busfield WK |
| 232 - 238 |
Study of the Reflectivity of Ceramic Materials for Laser-Cavity Mirrors
Krajewski A, Mazzinghi P |
| 239 - 249 |
Strengthening Potential of the Cubic-Sigma Precipitate in Al-Cu-Mg-Si Alloys
Schueller RD, Wawner FE, Sachdev AK |
| 250 - 254 |
Microstructural Features of Sintered Si3N4/SiC-Whiskers Composites - Mechanical Integrity of Whiskers
Brito ME, Bando Y, Mitomo M, Saito S |
| 255 - 261 |
Structure and Growth of Platelets in Graphite Spherulites in Cast-Iron
Miao B, Wood DO, Bian WM, Fang KM, Fan MH |
| 262 - 268 |
Formation of Plate-Like Lanthanum-Beta-Aluminate Crystal in Ce-TZP Matrix
Miura M, Hongoh H, Yogo T, Hirano S, Fujii T |
| 269 - 275 |
Deformation and Recrystallization in Cross-Rolled Al-Cu Precipitation Alloys
To S, Lee WB, Ralph B |
| 276 - 280 |
Displacement Control Crack-Growth Instability in an Elastic-Softening Material .3. General-Analysis for a Small Softening Zone
Smith E |
| 281 - 284 |
Humidity-Sensitive Characteristics of SnO2-Fe2O3 Thin-Films Prepared by Spray-Pyrolysis
Racheva TM, Stambolova ID, Donchev T |
