| 8677 - 8698 |
A review of the preparation and application of magnetic nanoparticles for surface-enhanced Raman scattering
Lai HS, Xu FG, Wang L |
| 8699 - 8719 |
Recent progress in the modification of carbon materials and their application in composites for electromagnetic interference shielding
Nazir A, Yu HJ, Wang L, Haroon M, Ullah RS, Fahad S, Naveed KUR, Elshaarani T, Khan A, Usman M |
| 8720 - 8746 |
Oxide-based RRAM materials for neuromorphic computing
Hong XL, Loy DJ, Dananjaya PA, Tan FA, Ng C, Lew W |
| 8747 - 8765 |
Progress in Ni-based anode materials for direct hydrocarbon solid oxide fuel cells
Wei KW, Wang XX, Budiman RA, Kang JH, Lin B, Zhou FB, Ling YH |
| 8766 - 8785 |
Synthesis of bactericidal polymer coatings by sequential plasma-induced polymerization of 4-vinyl pyridine and gas-phase quaternization of poly-4-vinyl pyridine
Hernandez-Orta M, Perez E, Cruz-Barba LE, Sanchez-Castillo MA |
| 8786 - 8794 |
The oxidase-like activity of hemin encapsulated by single-ring GroEL mutant and its application for colorimetric detection
Wang XQ, Xu BM, Liu ZZ |
| 8795 - 8806 |
Cell attachment/detachment behavior on poly(N-isopropylacrylamide)-based microgel films: the effect of microgel structure and swelling ratio
Xia YQ, Tang DC, Wu H, Wang XJ, Cao MW, He H, Wang SJ |
| 8807 - 8816 |
Enhanced dielectric constant and structural transformation in Fe-doped hydroxyapatite synthesized by wet chemical method
Singh B, Tandon A, Pandey AK, Singh P |
| 8817 - 8825 |
Synthesis and characterization of Ti-doped ZrSiO4 at ambient and high-pressure conditions
Ferrari S, Grinblat F, Bilovol V, Pampillo LG, Saccone FD, Errandonea D, Chanquia CM |
| 8826 - 8843 |
Studies of structural, optical, and electrical properties associated with defects in sodium-doped copper oxide (CuO/Na) nanostructures
Siddiqui H, Parra MR, Qureshi MS, Malik MM, Haque FZ |
| 8844 - 8854 |
Dual relaxation behaviors and large electrostrictive properties of Bi0.5Na0.5TiO3-Sr0.85Bi0.1TiO3 ceramics
Wang J, Zhou CR, Li QN, Zeng WD, Xu JW, Chen GH, Yuan CL, Rao GH |
| 8855 - 8865 |
Graphene/PANI hybrid film with enhanced thermal conductivity by in situ polymerization
Miao J, Li HL, Qiu HX, Wu X, Yang JH |
| 8866 - 8877 |
Anionic NbO-type copper organic framework decorated with carboxylate groups for light hydrocarbons separation under ambient conditions
Liu XP, Li X, Li J, Li GX, Guo S, Zhu HY, Zhao LM, Hao CL, Guo WY |
| 8878 - 8886 |
Enhanced performance of GaN-based LEDs via electroplating of a patterned copper layer on the backside
Tawfik WZ, Hyun GY, Lee SJ, Ryu SW, Ha JS, Lee JK |
| 8887 - 8900 |
Biocompatible nanoclusters of O-carboxymethyl chitosan-coated Fe3O4 nanoparticles: synthesis, characterization and magnetic heating efficiency
Linh PH, Chien NV, Dung DD, Nam PH, Hoa DT, Anh NTN, Hong LV, Phuc NX, Phong PT |
| 8901 - 8908 |
Removal and reuse of Ag nanoparticles by magnetic polyaniline/Fe3O4 nanofibers
Yang Q |
| 8909 - 8920 |
Synthesis and application of a novel environmental C26 diglycidyl ester plasticizer based on castor oil for poly(vinyl chloride)
Chen J, Liu ZS, Nie XA, Jiang JC |
| 8921 - 8932 |
Graphdiyne-hybridized N-doped TiO2 nanosheets for enhanced visible light photocatalytic activity
Dong YZ, Zhao YM, Chen YH, Feng YQ, Zhu MY, Ju CG, Zhang B, Liu HB, Xu JL |
| 8933 - 8950 |
Synthesis of Rh nanoparticles in alcohols: magnetic and electrocatalytic properties
Ramirez-Meneses E, Philippot K, Dominguez-Crespo MA, Ibrahim M, Betancourt I, Torres-Huerta AM, Ezeta-Mejia A |
| 8951 - 8962 |
Urea-assisted synthesis of amorphous molybdenum sulfide on P-doped carbon nanotubes for enhanced hydrogen evolution
Wang HZ, Zhou HB, Zhang WG, Yao SW |
| 8963 - 8977 |
Effects of POSS functionalization of carbon nanotubes on microstructure and thermomechanical behavior of carbon nanotube/polymer nanocomposites
Sabet SM, Mahfuz H, Terentis AC, Nezakat M, Hashemi J |
| 8978 - 8988 |
High thermal conductivity of diamond/copper composites produced with Cu-ZrC double-layer coated diamond particles
Pan YP, He XB, Ren SB, Wu M, Qu XH |
| 8989 - 9001 |
Sintering and tribomechanical properties of gel-combustion-derived nano-alumina and its composites with carbon nanotubes
Halder R, Sarkar S, Bandyopadhyay S, Chakraborti PC |
| 9002 - 9012 |
Highly flexible electrospun carbon/graphite nanofibers from a non-processable heterocyclic rigid-rod polymer of polybisbenzimidazobenzophenanthroline-dione (BBB)
Zhu J, Ding YC, Liao XJ, Xu WH, Zhang HA, Hou HQ |
| 9013 - 9025 |
Properties of microinjection-molded multi-walled carbon nanotubes-filled poly(lactic acid)/poly[(butylene succinate)-co-adipate] blend nanocomposites
Zhou ST, Hrymak AN, Kamal MR |
| 9026 - 9033 |
Preparation of fabric strain sensor based on graphene for human motion monitoring
Lee H, Glasper MJ, Li XD, Nychka JA, Batcheller J, Chung HJ, Chen Y |
| 9034 - 9045 |
Design of spinous Ni/N-GN nanocomposites as novel magnetic/dielectric microwave absorbents with high-efficiency absorption performance and thin thickness
Zhang LX, Zong Y, Li ZX, Huang KX, Sun Y, Lan YY, Wu HJ, Li XH, Zheng XL |
| 9046 - 9063 |
Integration of NiWO4 and Fe3O4 with graphitic carbon nitride to fabricate novel magnetically recoverable visible-light-driven photocatalysts
Mousavi M, Habibi-Yangjeh A |
| 9064 - 9075 |
Density functional theory study of electronic structure of defects and the role on the strain relaxation behavior of MoS2 bilayer structures
Wang J, Dongare AM |
| 9076 - 9090 |
Water vapour permeation through high barrier materials: numerical simulation and comparison with experiments
Batard A, Planes E, Duforestel T, Flandin L, Yrieix B |
| 9091 - 9098 |
Enhanced thermoelectric performance of bismuth-doped magnesium silicide synthesized under high pressure
Li JH, Li XP, Chen C, Hu WT, Yu FR, Zhao ZS, Zhang L, Yu DL, Tian YJ, Xu B |
| 9099 - 9106 |
Characterization of quaternary Zn/Sn-codoped GaN films obtained with Zn (x) Sn0.04GaN targets at different Zn contents by the RF reactive magnetron sputtering technology
Kuo DH, Liu YT |
| 9107 - 9116 |
Simultaneous optimization of Seebeck, electrical and thermal conductivity in free-solidified Bi0.4Sb1.6Te3 alloy via liquid-state manipulation
Gao N, Zhu B, Wang XY, Yu Y, Zu FQ |
| 9117 - 9130 |
Effect of annealing on microstructure and thermoelectric properties of hot-extruded Bi-Sb-Te bulk materials
Wang ZL, Araki T, Onda T, Chen ZC |
| 9131 - 9137 |
Enhanced metal-insulator transition in V2O3 by thermal quenching after growth
Trastoy J, Kalcheim Y, del Valle J, Valmianski I, Schuller IK |
| 9138 - 9148 |
Synthesis and characterization of carbon-modified Li2MnP2O7/C composites prepared by spray pyrolysis
Jang H, Miyasaka K, Taniguchi I |
| 9149 - 9159 |
Effects of TiO2 nanoparticle size and concentration on dielectric properties of polypropylene nanocomposites
Womble MD, Herbsommer J, Lee YJ, Hsu JWP |
| 9160 - 9169 |
Cagelike porous sulfonated polystyrene@polyaniline composite microspheres for high-performance supercapacitor
Huang HH, Lu JH, Wang MZ, Ge XW |
| 9170 - 9179 |
Reduced graphene oxide/Fe-phthalocyanine nanosphere cathodes for lithium-ion batteries
He DX, Xue WD, Zhao R, Hu WC, Marsden AJ, Bissett MA |
| 9180 - 9190 |
Surface passivation with nitrogen-doped carbon dots for improved perovskite solar cell performance
Wang YF, Zhang J, Chen SH, Zhang HY, Li LG, Fu ZY |
| 9191 - 9205 |
High-performance supercapacitors based on porous activated carbons from cattail wool
Su XL, Jiang S, Zheng GP, Zheng XC, Yang JH, Liu ZY |
| 9206 - 9216 |
One-pot hydrothermal fabrication and enhanced lithium storage capability of SnO2 nanorods intertangled with carbon nanotubes and graphene nanosheets
Xie QX, Zhu YT, Zhao P, Zhang YF, Wu SH |
| 9217 - 9231 |
Effect of rolling temperature on the microstructure, texture, and magnetic properties of strip-cast grain-oriented 3% Si steel
Fang F, Lu X, Lan MF, Zhang YX, Wang Y, Yuan G, Cao GM, Xu YB, Misra RDK, Wang GD |
| 9232 - 9242 |
Thermodynamic properties of Ag-Au-Pd alloys measured by a solid-state EMF method
Santoso I, Taskinen P |
| 9243 - 9257 |
Experimental investigation of the isothermal section of the Mg-Ni-Y system with LPSO phases at 400 A degrees C
Xu K, Liu SH, Huang DD, Du Y |
| 9258 - 9272 |
Effects of plastic straining on the corrosion resistance of TRIP-aided lean duplex stainless steels
Zhao Y, Wang Y, Li X, Zhang WN, Tang S, Liu ZT |
| 9273 - 9286 |
Microstructural comparison of friction-stir-welded aluminum alloy 7449 starting from different tempers
Martinez N, Kumar N, Mishra RS, Doherty KJ |
| 9287 - 9296 |
Microstructure evolution and mechanical reliability of Cu/Au-Sn/Cu joints during transient liquid phase bonding
Peng J, Liu HS, Ma HB, Shi XM, Wang RC |
| 9297 - 9304 |
Sintering aluminum alloy powder using direct current electric fields at room temperature in seconds
McWilliams B, Yu J, Kellogg F |
| 9305 - 9315 |
Dynamic transformation of Ti-6Al-4V during torsion in the two-phase region
Guo BQ, Semiatin SL, Jonas JJ, Yue S |
| 9316 - 9324 |
A study on generation of embossed carbon nanopattern by induced microdomain alignments in PAN-based block copolymer under electric field
Joo S, Kim B, An J, Park M, Seo S, Park JY, Bae J |
| 9325 - 9339 |
An in situ silicone-silicone interpenetrating polymer network (IPN) with higher mechanical property, higher hydrophilicity, and lower protein adsorption
Xie Y, Wang L, Zhang Y, Li HB, Huang RH |
| 9340 - 9349 |
MoS2-filled coating on flexible polyurethane foam via layer-by-layer assembly technique: flame-retardant and smoke suppression properties
Pan HF, Shen Q, Zhang ZN, Yu BH, Lu YS |
| 9350 - 9362 |
The study of damping property and mechanism of thermoplastic polyurethane/phenolic resin through a combined experiment and molecular dynamics simulation
Zhou R, Gao WQ, Xia LC, Wu H, Guo SY |
