| 3893 - 3913 |
The Interfacial Properties of Aramid/Epoxy Model Composites
Andrews MC, Bannister DJ, Young RJ |
| 3915 - 3920 |
Study of Blends Based on Recycled Polyethylene Wastes .2. Thermal-Behavior and Degree of Molecular Mixing
Rueda DR, Malers L, Viksne A, Calleja FJ |
| 3921 - 3927 |
Direct Observations and Comparison of Crater Cross-Section Microstructures in Copper Targets for Aluminum Projectiles Impacting at 1.4 and 6.7 km(-1)
Quinones SA, Rivas JM, Garcia EP, Murr LE |
| 3929 - 3936 |
Precipitation Characteristics of Mu-Phase in Wrought Nickel-Base Alloys and Its Effect on Their Properties
Tawancy HM |
| 3937 - 3943 |
Stability of the Perovskite Phase in PMN-Pzn-Pt Ceramics
Escure P, Lattard E, Lejeune M, Baumard JF |
| 3945 - 3954 |
Role of Blend Morphology in Rubber-Toughened Polymers
Bagheri R, Pearson RA |
| 3955 - 3963 |
Scratching Behavior of Polymer-Films Using Blunt Spherical Styli
Ni BY, Lefaou A |
| 3965 - 3969 |
Directional Solidification and Interface Structure of Fe3O4-Ylg Eutectic
Echigoya J, Hayashi S, Sasaki K |
| 3971 - 3981 |
On the Effects of 2nd-Phase Distribution on the Fracture-Behavior of 2 Superplastic Aluminum-Alloys
Padmanabhan KA, Engler O, Lucke K |
| 3983 - 3987 |
Yielding and Impact Behavior of pp/Sgf/EPR Ternary Composites with Controlled Morphology
Jancar J |
| 3989 - 3993 |
Passivation and Stress-Corrosion Cracking Tendency of Manganese Stainless-Steels
Devasenapathi A, Prasad RC, Raja VS |
| 3995 - 4005 |
The Synthesis, Characterization and Sintering of Sol-Gel Derived Cordierite Ceramics for Electronic Applications
Pal D, Chakraborty AK, Sen S, Sen SK |
| 4007 - 4016 |
Plasma-Chemical Synthesis of Ultradispersed Iron-Oxides with Pigment Qualification
Vissokov GP, Pirgov PS |
| 4017 - 4023 |
Characterization of Corrosion Products Formed on a Rapidly Solidified Mg Based Ea55Rs Alloy
Li Y, Lin J, Loh FC, Tan KL, Jones H |
| 4025 - 4032 |
Microstructure and Composition of Al-Al2O3 Composites Made by Reactive Metal Penetration
Gao Y, Jia J, Loehman RE, Ewsuk KG, Fahrenholtz WG |
| 4033 - 4038 |
Effect of Elastomer on Polypropylene/Nylon-12 Blends
Long Y, Shanks RA |
| 4039 - 4046 |
Structural Evolution of Matrix Phase for Liquid-Phase Sintered 93W-4.9Ni-2.1Fe
Chiou YH, Zu YS, Lin ST |
| 4047 - 4053 |
Domain Growth in Partially Melted Bulk Nd1+xba2-Xcu3O7-Delta
Marella M, Tomaselli M, Gerolin F, Molinas B, Fabris BB, Meregalli L |
| 4055 - 4065 |
Elevated-Temperature Deformation-Behavior of Multiphase Ni-20 at-Percent Al-30 at-Percent Fe and Its Constituent Phases
Guha S, Baker I, Munroe PR |
| 4067 - 4076 |
Formation and Characterization of the Solid-Solutions (Crxfe1-X)(2)O-3, 0-Less-Than-or-Equal-to-X-Less-Than-or-Equal-to-1
Music S, Lenglet M, Popovic S, Hannoyer B, Czakonagy I, Ristic M, Balzar D, Gashi F |
| 4077 - 4080 |
Interdiffusion in the Solid Couple AgI-Cui
Bazan JC, Pettigrosso RS |
| 4081 - 4085 |
Electrical-Properties of ZnSe-CdS Alloy-Films
Venugopal R, Vijayalakshmi RP, Reddy DR, Reddy BK |
| 4087 - 4092 |
Anisotropy of Crystallite Growth During Sintering of SnO2 Xerogels
Brito GE, Pulcinelli SH, Santilli CV |
| 4093 - 4097 |
Electrical Percolation Phenomena in Cement Composites Containing Conductive Fibers
Xie P, Gu P, Beaudoin JJ |
| 4099 - 4103 |
A Plastic Flow-Induced Fracture Theory for Fatigue-Crack Growth
Ding HZ, Xing XS |
| 4105 - 4110 |
Application of Homogenization FEM Analysis to Regular and Reentrant Honeycomb Structures
Lee JH, Choi JB, Choi K |
| 4111 - 4119 |
The Processing of a Magnesium-Alumino-Silicate Matrix, SiC Fiber Glass-Ceramic Matrix Composite Using a Pulsed Nd-YAG Laser .1. Optimization of Pulse Parameters
Tuersley IP, Hoult AP, Pashby IR |
| 4121 - 4126 |
The Processing of a Magnesium-Alumino-Silicate Matrix, SiC Fiber Glass-Ceramic Matrix Composite Using a Pulsed Nd-YAG Laser .2. The Effect of Process Variables
Tuersley IP, Hoult AP, Pashby IR |
| 4127 - 4131 |
Viscoelastic-Plastic Behavior with Mean Strain Changes in Polypropylene
Ariyama T |
| 4133 - 4140 |
A Study of the Wetting, Microstructure and Bond Strength in Brazing SiC by Cu-X(X=ti,V,Nb,Cr) Alloys
Lee HK, Lee JY |
| 4141 - 4147 |
Anelastic Relaxation Associated with the Motion of Domain-Walls in Barium-Titanate Ceramics
Cheng BL, Gabbay M, Fantozzi G |
| 4149 - 4157 |
Effects of Nondensifying Inclusions on the Densification and Microstructure of Zinc-Oxide Matrix Composites
Kimura T, Kajiyama H, Yazaki R, Yamaguchi T |
| 4159 - 4164 |
The Effect of Carbon-Containing Atmosphere on the Structure and Mechanical-Properties of Fe-32Mn-9.4Al-1C-1.27Si Alloy
Liu JY, Chang SC |
| 4165 - 4169 |
Structure Evolution in the Cu-Fe System During Mechanical Alloying
Huang JY, He AQ, Wu YK, Ye HQ, Li DX |
