| 4477 - 4483 |
Precipitation kinetics in A16061 and in an A16061-alumina particle composite
Chen SP, Mussert KM, van der Zwaag S |
| 4485 - 4490 |
Dynamic transport in ionic conductors
Jonscher AK, Leon C, Santamaria J |
| 4491 - 4501 |
Mechanical properties of injection moulded styrene maleic anhydride (SMA) - Part II - Influence of short glass fibres and weldlines
Chrysostomou A, Hashemi S |
| 4503 - 4508 |
Modelling the creep rates of eutectic Bi-Sn solder using the data from its constitutive phases
Raeder CH, Mitlin D, Messler RW |
| 4509 - 4516 |
Fatigue crack closure and crack growth behaviour in a titanium alloy with different microstructures
Wang SH, Muller C |
| 4517 - 4523 |
Preparation and characterization of lanthanum zirconate
Nair J, Nair P, Doesburg EBM, van Ommen JG, Ross JRH, Burggraaf AJ, Mizukami F |
| 4525 - 4530 |
Diffusion bonding of zirconia to silicon nitride using nickel interlayers
Vegter RH, den Ouden G |
| 4531 - 4541 |
Microstructure and tribological properties of alumina ceramic with laser-dispersed tungsten additions
Przemeck K, zum Gahr KH |
| 4543 - 4549 |
Scanning electron acoustic microscopy for the evaluation of domain structures in BaTiO3 single crystal and ceramics
Liu XX, Balk LJ, Zhang BY, Yin QR |
| 4551 - 4560 |
Differential photo-calorimetry of photopolymerizable ceramic suspensions
Brady GA, Halloran JW |
| 4561 - 4568 |
Effect of silicon-ion implantation upon the corrosion properties of austenitic stainless steels
Baszkiewicz J, Kozubowski JA, Krupa D, Kaminski M, Barcz A, Gawlik G, Jagielski J |
| 4569 - 4579 |
Observation of crack growth in PMMA with a low short glass fibre content by optical interferometry
Kitagawa M, Kai A, Koyama N |
| 4581 - 4588 |
Moisture-assisted crack growth at epoxy-glass interfaces
Ritter JE, Fox JR, Hutko DI, Lardner TJ |
| 4589 - 4594 |
Ultrasonic study of the temperature and pressure dependences of the elastic properties of a single-crystal Heusler structure Cu41Mn20Al39 alloy
Saunders GA, Liu HJ, Cankurtaran M, Bach H |
| 4595 - 4601 |
FTIR spectroscopy and physical properties of an epoxy/bismaleimide IPN system
Musto P, Martuscelli E, Ragosta G, Russo P, Scarinzi G, Villano P |
| 4603 - 4608 |
Influence of the thickness and area of NiCr/Ag electrodes on the characteristics of BaTiO3- ceramic based positive-temperature-coefficient thermistors
Heinen B, Waser R |
| 4609 - 4620 |
Dielectric and structural properties of A-cation-deficient perovskites, tetragonal tungsten bronzes and their composites in the K2Sr4(MgxNb10-x)Li3xO30 system
Tribotte B, Hervieu M, Desgardin G |
| 4621 - 4626 |
Characterization of Ge-Bi-S glass by thermal, electrical, switching and optical measurements
Sedeek K, Fadel M, Afifi MA |
| 4627 - 4632 |
Growth parameters on the defects formation in a grown silicon crystal
Kim YK, Ha TS, Yoon JK |
| 4633 - 4641 |
Synthesis and characterization of photoconductive C-60-N-vinylcarbazole copolymers
Chen Y, Cai RF, Xiao LX, Huang ZE, Pan DC |
| 4643 - 4645 |
Structural and magnetic properties of Fe clusters embedded in Ag matrix
Wang H |
| 4647 - 4655 |
Elastic properties of compacted metal powders
Carnavas PC, Page NW |
| 4657 - 4663 |
An STM and atomic force microscopy study of the effects of 1.8 MeV electron bombardment on the surface of graphite
Chen YJ, Wilson IH, Xu JB, Lin LB |
