| 4763 - 4775 |
Dependence of luminescence properties on composition of rare-earth activated (oxy)nitrides phosphors for white-LEDs applications
He XH, Lian N, Sun JH, Guan MY |
| 4776 - 4780 |
Study on graphite fiber and Ti particle reinforced Al composite
Wu GH, Su J, Gou HS, Xiu ZY, Jiang LT |
| 4781 - 4788 |
Structure and properties of lead and lead sulfide nanoparticles in natural zeolite
Roman-Zamorano JF, Flores-Acosta M, Arizpe-Chavez H, Castillon-Barraza FF, Farias MH, Ramirez-Bon R |
| 4789 - 4795 |
Processing and properties of poly(epsilon-caprolactone)/carbon nanofibre composite mats and films obtained by electrospinning and solvent casting
Armentano I, Del Gaudio C, Bianco A, Dottori M, Nanni F, Fortunati E, Kenny JM |
| 4796 - 4805 |
Synthesis and characterization of some novel thermally stable poly(amide-imide)s
Mohsin MA, Akhter Z, Bolte M, Butt MS, Khan MSU, Siddiqi HM |
| 4806 - 4813 |
Thermal- and stress-induced lattice distortions in a single Kevlar49 fibre studied by microfocus X-ray diffraction
Davies RJ, Burghammer M |
| 4814 - 4826 |
Characterization of silicon phases in spray-formed and extruded hypereutectic Al-Si alloys by image analysis
Cui CS, Schulz A, Matthaei-Schulz E, Zoch HW |
| 4827 - 4833 |
Hydrogen-storage performance of an Mg-Ni-Fe alloy prepared by reactive mechanical grinding
Song MY, Baek SH, Bobet JL, Kwon SN, Hong SH |
| 4834 - 4839 |
Microwave-hydrothermal synthesis of nano-sized Sn2+-doped BaTiO3 powders and dielectric properties of corresponding ceramics obtained by spark plasma sintering method
Xie YH, Yin S, Hashimoto T, Kimura H, Sato T |
| 4840 - 4847 |
A mu-Phase behavior in a cast Ni-base superalloy
Qin XZ, Guo JT, Yuan C, Yang GX, Zhou LZ, Ye HQ |
| 4848 - 4855 |
Influence of interfacial modification on the thermal conductivity of polymer composites
Lee B, Dai G |
| 4856 - 4859 |
Generalized fragility of eutectic Al-Si alloys modified with phosphorus
Song XG, Bian XF, Zhang JX, Zhang J, Liu XF |
| 4860 - 4873 |
Simultaneously enhanced tensile and compressive response of AZ31-NanoAl(2)O(3)-AA5052 macrocomposite
Paramsothy M, Hassan SF, Srikanth N, Gupta M |
| 4874 - 4882 |
Characterization and photocatalytic activity of TiO2-M (x) O (y) (M (x) O (y) = SiO2, Al2O3, and ZrO2) mixed oxides synthesized by microwave-induced solution combustion technique
Reddy BM, Reddy GK, Rao KN, Ganesh I, Ferreira JMF |
| 4883 - 4891 |
Investigation of the quasi-ternary system LaMnO3-LaCoO3-"LaCuO3". II: The series LaMn0.25-x Co0.75-x Cu-2x O3-delta and LaMn0.75-x Co0.25-x Cu-2x O3-delta
Tietz F, Raj IA, Fu QX, Zahid M |
| 4892 - 4899 |
Analysis of the high growth-rate transition in Al-Si eutectic solidification
Hosch T, England LG, Napolitano RE |
| 4900 - 4904 |
Glass formation and phase selection of melt-spun Al-Zn-Ce alloys
Li CF, Zhang CJ |
| 4905 - 4910 |
Electrophysical properties of Cu/Cr and Fe/Cr film systems within elastic and plastic deformation range
Protsenko SI, Velykodnyi DV, Kheraj VA, Desai MS, Panchal CJ, Protsenko IY |
| 4911 - 4918 |
Weibull modulus of nano-hardness and elastic modulus of hydroxyapatite coating
Dey A, Mukhopadhyay AK, Gangadharan S, Sinha MK, Basu D |
| 4919 - 4929 |
Fatigue damage of low amplitude cycles in low carbon steel
Mayer H |
| 4930 - 4938 |
Quasi-static cyclic loadings induced inelastic deformation in a Zr-based bulk metallic glass under nanoindentation
Tekaya A, Labdi S, Benameur T, Jellad A |
| 4939 - 4943 |
Microstructures, ferromagnetic, and ferroelectric properties in polyvinylpyrrolidone-assisted CoFe2O4/Pb(Zr0.53Ti0.47)O-3 multiferroic composite thick films
Chen W, Chen XF, Wang ZH, Zhu W, Tan OK |
| 4944 - 4952 |
Descriptive microstructure and fracture surface observations of fired volcanic ash
Leonelli C, Kamseu E, Melo UC, Corradi A, Pellacani GC |
| 4953 - 4958 |
Ferroelectric and piezoelectric properties of [(Bi0.98La0.02Na1-x Li (x) )(0.5)](0.94)Ba0.06TiO3 lead-free ceramics
Lin DM, Kwok KW |
| 4959 - 4968 |
Water-based sol-gel nanocrystalline barium titanate: controlling the crystal structure and phase transformation by Ba:Ti atomic ratio
Mohammadi MR, Rad AE, Fray DJ |
| 4969 - 4975 |
An innovative and versatile approach to design highly porous, patterned, nanofibrous polymeric materials
Zucchelli A, Fabiani D, Gualandi C, Focarete ML |
| 4976 - 4986 |
Determination of large deformation and fracture behaviour of starch gels from conventional and wire cutting experiments
Gamonpilas C, Charalambides MN, Williams JG |
| 4987 - 4992 |
Effect of humidity on the conduction processes of Li3VO4
Kazakopoulos A, Kalogirou O |
| 4993 - 4998 |
Dielectric properties and microstructure of TiO2 modified (ZnMg)TiO3 microwave ceramics with CaO-B2O3-SiO2
Li B, Zhang SR, Yuan Y, Zhou XH, Xiang LC |
| 4999 - 5003 |
Optical properties of dye-doped deoxyribonucleic acid films
Kitazawa N, Miyagawa S, Date K, Aroonjaeng W, Aono M, Watanabe Y |
| 5004 - 5012 |
Magnetic resonance studies of hydration kinetics and microstructural evolution in plaster pastes
Song KM, Mitchell J, Gladden LF |
| 5013 - 5016 |
Spectroscopic evaluation of native, milled, and functionalized beta-TCP seeding into dental enamel lesions
Karlinsey RL, Mackey AC, Walker ER, Frederick KE |
| 5017 - 5020 |
Improvement of mechanical properties of hydroxyapatite particle-filled poly(l-lactide) biocomposites using lysine tri-isocyanate
Takayama T, Todo M |
