| 4749 - 4762 |
Dry sliding wear behavior of spray deposited AlCuMn alloy and AlCuMn/SiCp composite
Gui MC, Kang SB, Lee JM |
| 4763 - 4768 |
Preparation of nickel-coated powders as precursors to reinforce MMCs
Leon CA, Drew RAL |
| 4769 - 4776 |
Polymers in hernia repair - common polyester vs. polypropylene surgical meshes
Klosterhalfen B, Klinge U, Schumpelick V, Tietze L |
| 4777 - 4782 |
Synthesis and photoluminescence properties of (Y,Gd)BO3 : Eu phosphor prepared by ultrasonic spray
Kim DS, Lee RY |
| 4783 - 4787 |
High dielectric constant of SrTiO3 thin films prepared by chemical process
Pontes FM, Lee EJH, Leite ER, Longo E, Varela JA |
| 4789 - 4794 |
Effects of deposition temperature and pressure of the surface roughness and the grain size of polycrystalline Si1-xGex films
Lee SH, So MG |
| 4795 - 4801 |
Material contacts under cyclic compression, studied in real time by electrical resistance measurement
Luo XC, Chung DDL |
| 4803 - 4808 |
Development of high nitrogen, low nickel, 18%Cr austenitic stainless steels
Di Schino A, Kenny JM, Mecozzi MG, Barteri M |
| 4809 - 4814 |
The effects of drying, aging and curing on an organic -inorganic coating
Malzbender J, De With G |
| 4815 - 4821 |
Controlled crystallization and characterization of cordierite glass-ceramics for magnetic memory disk substrate
Sohn SB, Choi SY, Lee YK |
| 4823 - 4826 |
AC impedance spectroscopy of pore reduced cements: Influence of contact resistance
Macphee DE, Cormack SL, Sinclair DC |
| 4827 - 4832 |
The slip casting and mechanical characterisation of magnesium-alumino-silicate glass-ceramics
Howard PJ, Hughes AC |
| 4833 - 4840 |
Effect of high density polyethylene addition and testing temperature on the mechanical and morphological properties of polypropylene/ethylene-propylene diene terpolymer binary blends
Kim JY, Chun BC |
| 4841 - 4847 |
Nonlinear electrical properties of ZnO varistors fast-fired by using millimeter-wave sintering process
Lee WC, Liu KS, Lin IN |
| 4849 - 4856 |
Structural characterisation of transparent oxyfluoride glass-ceramics
Mortier M, Patriarche G |
| 4857 - 4863 |
Synthesis of nm-sized barium titanate crystallites using a new LTDS method and their characterization
Wada S, Chikamori H, Noma T, Suzuki T |
| 4865 - 4871 |
Study of Al2O3 effect on structural change and phase separation in Na2O-B2O3-SiO2 glass by NMR
Du WF, Kuraoka K, Akai T, Yazawa T |
| 4873 - 4877 |
Nickel beta-diketonate complexes as precursors for the photochemical deposition of nickel oxide thin films
Buono-Core GE, Tejos M, Alveal G, Hill RH |
| 4879 - 4883 |
Structural characterization of bulk ZnWO4 prepared by solid state method
Phani AR, Passacantando M, Lozzi L, Santucci S |
| 4885 - 4893 |
1 : 2 Long-range ordering and defect mechanism of WO3-doped perovskite Ba(Mg1/3Ta2/3)O-3
Kim YK, Lee KM, Jang HM |
| 4895 - 4900 |
Preparation and properties of SiO2 matrix composites doped with AlN particles
Wu JH, Guo JK, Li BS |
| 4901 - 4905 |
Microwave dielectric properties of (1-x)CaO-xBaO-Li2O-(1-y) Sm2O3-yNd2O3-TiO2 ceramics system
Huang CL, Tsai JT, Li JL |
| 4907 - 4912 |
Electronic properties of SbxSe1-x glasses
Mikla VI, Mikhalko IP, Nagy YY, Mateleshko AV, Mikla VV |
| 4913 - 4918 |
Sintering and crystallization of off-stoichiometric BaO center dot Al2O3 center dot 2SiO2 glasses
Sung YM, Ahn JW |
| 4919 - 4922 |
Superplastic properties of a TiAl based alloy with a duplex microstructure
Sun J, Wu JS, He YH |
| 4923 - 4930 |
Surface modification of micromachined silicon filters
Wang YC, Ferrari M |
| 4931 - 4935 |
Structural evolution, dielectric and electro-optic properties of sol-gel derived potassium titanyl phosphate thin films
Zhang JP, Lee BI, Wang FL |
| 4937 - 4943 |
Experiments and analyses on tensile behaviour of a TiAl alloy with lamellar structure
Fu M, Hong YS, Ma YL, Li SQ |
| 4945 - 4953 |
NO decomposition by ultrafine noble metals dispersed on the rare earth phosphate hollow particles
Tamai H, Ikeya T, Nishiyama F, Yasuda H, Iida K, Nojima S |
| 4955 - 4960 |
Effect of ceramic particle size and applied pressure on time to complete infiltration of liquid aluminium into SiC powder compacts
Candan E, Atkinson HV, Jones H |
| 4961 - 4970 |
FTIR spectral characterization of thin film coatings of oleic acid on glasses - Part II - Coatings on glass from different media such as water, alcohol, benzene and air
Lee DH, Condrate RA, Lacourse WC |
| 4971 - 4976 |
Synthesis of low-density silica gel at ambient pressure: Effect of heat treatment
Kang SK, Choi SY |
| 4977 - 4987 |
Thermal analysis of copper-tin alloys during rapid solidification
Mahmoudi J, Fredriksson H |
| 4989 - 4994 |
The corrosion and tarnish behavior of new palladium-indium system alloys
Kim HS, Dzo MH, Lee KH, Shin MC |
| 4995 - 4999 |
Effects of ultrasound on perovskite phase developments, microstructures, and dielectric properties of sol-gel-processed PbTiO3 thin films
Kim JK, Kim NK, Park BO |
| 5001 - 5011 |
Effects of sorbed water on crack propagation in poly(methyl methacrylate) under static tensile stress
Bokoi Y, Ishiyama C, Shimojo M, Shiraishi Y, Higo Y |
