| 7983 - 7990 |
Melt-spun poly(tetrafluoroethylene) fibers
Goessi M, Tervoort T, Smith P |
| 7991 - 8000 |
The effect of processing parameters on the mechanical properties of auxetic polymeric fibers
Alderson KL, Alderson A, Davies PJ, Smart G, Ravirala N, Simkins G |
| 8001 - 8005 |
Preparation and characterization of titanium dioxide nanocomposite fibers
Wei QF, Yu LG, Mather RR, Wang XQ |
| 8006 - 8009 |
The influences of slot width of an attenuator on the properties of PET spunbonded fibers
Wang H, Jin XG, Wu HB, Yin BP |
| 8010 - 8019 |
Protein fibers: structural mechanics and future opportunities
Hearle JWS |
| 8020 - 8024 |
A study on multifunctional wool textiles treated with nano-sized silver
Ki HY, Kim JH, Kwon SC, Jeong SH |
| 8025 - 8028 |
Surface functionalization of silk fabric by PTFE sputter coating
Huang FL, Wei QF, Liu Y, Gao WD, Huang Y |
| 8029 - 8034 |
Electrospinning of chitosan nanofibrous structures: feasibility study
De Vrieze S, Westbroek P, Van Camp T, Van Langenhove L |
| 8035 - 8039 |
Modeling of capillary flow in shaped polymer fiber bundles
Zhang Y, Wang HP, Zhang CX, Chen YH |
| 8040 - 8046 |
Design of filter bag media with high collection efficiency
Yeo SY, Lim DY, Byun SW, Kim JH, Jeong SH |
| 8047 - 8052 |
Adhesion of PBO fiber in epoxy composites
Marder E, Melcher S, Liu JW, Gao SL, Bianchi AD, Zherlitsyn S, Wosnitza J |
| 8053 - 8061 |
Interfacial stress transfer in an aramid reinforced thermoplastic elastomer
Coffey AB, O'Bradaigh CM, Young RJ |
| 8062 - 8070 |
Commingled yarns of surface nanostructured glass and polypropylene filaments for effective composite properties
Mader E, Rothe C, Gao SL |
| 8071 - 8082 |
Diffusion-limited reactive wetting: effect of interfacial reaction behind the advancing triple line
Hodaj F, Dezellus O, Barbier JN, Mortensen A, Eustathopoulos N |
| 8083 - 8087 |
Morphological, structural and optical characterization of nickel nanostructures fabricated through electrochemical template synthesis
Kaur R, Verma NK, Chakarvarti SK |
| 8088 - 8092 |
Surface equilibrium angle for anisotropic grain growth in SnO2 systems
Tebcherani SM, Cava S, Varela JA, Leite ER, Longo E |
| 8093 - 8100 |
Influence of oxidized polyethylene wax (OPW) on the mechanical, thermal, morphological and biodegradation properties of PHB/LDPE blends
Rosa DD, Gaboardi F, Guedes CDF, Calil MR |
| 8101 - 8105 |
Adiabatic shear bands in alpha-titanium tube under external explosive loading
Wang BF, Yang Y, Chen ZP, Zeng Y |
| 8106 - 8112 |
Nano-web formation by the electrospinning at various electric fields
Kong CS, Lee TH, Lee SH, Kim HS |
| 8113 - 8119 |
Preparation and characterization of polycaprolactone-chitosan composites for tissue engineering applications
She HD, Xiao XF, Liu RF |
| 8120 - 8125 |
A new approach for estimation of Poisson's ratio of porous powder compacts
Phani KK, Sanyal D |
| 8126 - 8129 |
Microstructure and mechanical properties of friction stir welded copper
Sakthivel T, Mukhopadhyay J |
| 8130 - 8138 |
In situ SALS and volume variation measurements during deformation of treated silica filled SBR
Ramier J, Chazeau L, Gauthier C, Stelandre L, Guy L, Peuvrel-Disdier E |
| 8139 - 8143 |
Influence of interstitial impurities on the valence electron structures and phase transformation behavior in intermediate Ti-Al alloys
Zhi W, Li W, Gupta H |
| 8144 - 8149 |
Preparation of nanocomposite for optical application using ZnTe nanoparticles and a zero-birefringence polymer
Inui C, Kura H, Sato T, Tsuge Y, Shiratori S, Ohkita H, Tagaya A, Koike Y |
| 8150 - 8157 |
Mechanical characterization of glass/polyimide microjoints fabricated using cw fiber and diode lasers
Mian A, Newaz G, Mahmood T, Auner G |
| 8158 - 8162 |
N and p doped poly(3,4-ethylenedioxythiophene) electrode materials for symmetric redox supercapacitors
Bhat DK, Kumar MS |
| 8163 - 8171 |
Characterization of starch based nanocomposites
Kvien I, Sugiyama J, Votrubec M, Oksman K |
| 8172 - 8177 |
Effects of the substitution of Al for Ni on the structure and electrochemical performance of La0.7Mg0.3Ni2.55-xCo0.45Alx (x=0-0.4) electrode alloys
Zhang YH, Zhao DL, Li BW, Ren HP, Guo SH, Wang XL |
| 8178 - 8188 |
Growth rate of Nb3Sn for reactive diffusion between Nb and Cu-9.3Sn-0.3Ti alloy
Mikami K, Kajihara M |
| 8189 - 8192 |
Low temperature processing of Mn-Zn nanoferrites
Mathur P, Thakur A, Singh M |
| 8193 - 8202 |
Preparation of anatase F doped TiO2 sol and its performance for photodegradation of formaldehyde
Huang DG, Liao SJ, Quan SQ, Liu L, He ZJ, Wan JB, Zhou WB |
| 8203 - 8208 |
Stress characterization of surface damages on soda-lime glass using a nanocontact deformation method
Lee YH, Kim JY, Baek U, Nahm SH |
| 8209 - 8214 |
Effect of mechanical milling on the corrosion behavior of Al-Zn/Al2O3 composite in NaCl solution
Durai TG, Das K, Das S |
| 8215 - 8221 |
A novel method for producing open-cell Al2O3-ZrO2 ceramic foams with controlled cell structure
Yu JY, Sun XD, Li Q, Li XD |
| 8222 - 8229 |
Preparation of smooth potassium hexatitanate nanofilms by sol-gel method
Qian QH, Zhou XF, Hu YY, Liu C, Feng X, Lu XH |
| 8230 - 8235 |
Deformation tracks distribution in iridium single crystals under tension
Panfilov P |
| 8236 - 8241 |
Hydrothermal solidification of blast furnace slag by formation of tobermorite
Jing Z, Jin F, Hashida T, Yamasaki N, Ishida H |
| 8242 - 8247 |
Controlled formation of dielectric chain aggregates on material surfaces
Li GF, Wang ZQ, Wang NH |
| 8248 - 8250 |
Magnetic properties of the Fe-Nd-Al alloys prepared by suction casting
Bai Q, Xu H, Tan XH, Zhang SY, Dong YD |
| 8251 - 8253 |
Microstructure of laser-induced combustion synthesis of Cu59.6Zr36.9Al3.5 alloy
Wang YF, Han ZD, Zhong P |
| 8254 - 8261 |
Structural and electrical properties of zinc-substituted cobalt ferrite
Bayoumi W |
| 8262 - 8270 |
Impact modification of SAN using NR-g-SAN copolymers
George B, Maiti SN, Varma IK |
| 8271 - 8278 |
Mechanical characterization of melt spun fibers from recycled and virgin PET blends
Elamri A, Lallam A, Harzallah O, Bencheikh L |
| 8279 - 8286 |
The electrochemical behaviour of nitrogen-containing austenitic stainless steel in methanolic solution
Singh VB, Ray M |
| 8287 - 8291 |
Preparation and properties of novel fishnet fibers with inhibitory effects on the adhesion of seaweeds
Zhao YP, Chen L, Zhang H, Qiu XL, Zhao GB, Zhang B |
| 8292 - 8297 |
Preparation and characterization of nanosized bismuth doped tin dioxide powders with a novel post treatment process
He QX, Tu WP, Hu JQ |
| 8298 - 8305 |
The effect of manganese on the microstructure and mechanical properties of zinc-aluminium based ZA-8 alloy
Turk A, Durman M, Kayali ES |
| 8306 - 8310 |
Structural, dielectric and electrical properties of Te modified barium stannates using impedance analysis
Kumar A, Choudhary RNP, Singh BP |
| 8311 - 8319 |
Suspension polymerization casting of lead zirconate titanate, Part II: acrylate system
Miao W, Halloran JW, Brei DE |
| 8320 - 8325 |
Preparation and characterization of Cu/SiO2 catalyst by co-gelation process
Zheng MF, Zhao TB, Xu WG, Li FY, Wang Y |
| 8326 - 8333 |
Effect of organoclay addition on the two-body abrasive wear characteristics of polyamide 6 nanocomposites
Srinath G, Gnanamoorthy R |
| 8334 - 8341 |
Determination of crystallographic orientation of dwell-fatigue fracture facets in Ti-6242 alloy
Sinha V, Mills MJ, Williams JC |
| 8342 - 8349 |
Epoxy-imide resins from N-(4-carboxyphenyl)trimellitimide: effect of imide and aromatic content on adhesive and thermal properties
Abraham G, Packirisamy S, Bhagawan SS, Balasubramanian G, Ramaswamy RI |
| 8350 - 8356 |
Fabrication of TiC and TiB2 locally reinforced steel matrix composites using a Fe-Ti-B4C-C system by an SHS-casting route
Zhang ZQ, Shen P, Wang Y, Dong YP, Jiang QC |
| 8357 - 8362 |
Phase transformations of calcium phosphates formed in wet field environments
Clarkin OM, Towler MR, Insley GM, Murphy ME |
| 8363 - 8369 |
The effect of curing conditions and ageing on the thermo-mechanical properties of polyimide and polyimide-silica hybrids
Ali AAM, Ahmad Z |
| 8370 - 8373 |
Microstructure and varistor properties of ZnO-V2O5-MnO2-based ceramics
Nahm CW |
| 8374 - 8376 |
Observation of the suppression of Mg17Al12 formation in a La-containing AZ91 alloy
Balasubramani N, Suresh M, Srinivasan A, Pillai UTS, Pai BC |
| 8377 - 8380 |
Oxidation resistance of multi-walled carbon nanotubes purified with sulfuric and nitric acids
Zhang XX, Deng CF, Xu R, Wang DZ |
| 8381 - 8385 |
Synthesis and crystallization behavior of poly(trimethylene terephthalate)-poly(ethylene glycol) segmented copolyesters
Xu Y, Jia HB, Ye SR, Huang J |
