Journal of Materials Science

Journal of Materials Science, Vol.47, No.2 Entire volume, number list

ISSN: 0022-2461 (Print)

In this Issue (60 articles)

535 - 552	Silicon nitride: the engineering material of the future Krstic Z, Krstic VD
553 - 582	Glass-ceramic glazes for ceramic tiles: a review Casasola R, Rincon JM, Romero M
583 - 598	Wood: A 45th anniversary review of JMS papers Part 2. Wood modification, fire resistance, carbonization, wood-cement and wood-polymer composites Ansell MP
599 - 609	Defects in natural fibres: their origin, characteristics and implications for natural fibre-reinforced composites Hughes M
610 - 624	Bioactive ceramics: processing, structures and properties Juhasz JA, Best SM
625 - 631	Glass transition and fragility of telluro-vanadate glasses containing antimony oxide Souri D
632 - 642	The effect of gauge length on tensile strength and Weibull modulus of polyacrylonitrile (PAN)- and pitch-based carbon fibers Naito K, Yang JM, Tanaka Y, Kagawa Y
643 - 648	Preparation of porous poly(l-lactic acid)/tobermorite composite membranes via electrospinning and heat treatment Okuyama T, Maeda H, Ishida EH
649 - 658	A tribological and biomimetic study of PI-CNT composites for cartilage replacement Ribeiro R, Banda S, Ounaies Z, Ucisik H, Usta M, Liang H
659 - 667	Characterization of chitosan and polycaprolactone membranes designed for wound repair application Salgado CL, Sanchez EMS, Mano JF, Moraes AM
668 - 676	Surface plasma resonance spectra of Au nanoparticles formed from dewetted thin films He JY, Lu JX, Dai N, Zhu DM
677 - 684	Synthesis and characterization of photoactive polyurethane elastomers with 2,3-dihydroxypyridine in the main chain Oprea S, Potolinca VO
685 - 695	Explosive welding of stainless steel-carbon steel coaxial pipes Zamani E, Liaghat GH
696 - 701	Structure and dielectric/piezoelectric properties of LiNbO3-doped BiScO3-PbTiO3 ceramics with morphotropic phase boundary composition Zhang Q, Li ZR, Zhang N, Xu Z
702 - 710	Interactions at fiber/matrix interface in short fiber reinforced amorphous thermoplastic composites modified with micro- and nano-fillers Isitman NA, Aykol M, Kaynak C
711 - 719	Synthesis and characterization of carbon hollow microspheres Jin Q, Zheng MT, Wu YJ, Xie CL, Xiao Y, Liu YL
720 - 729	Effect of tempering treatment on microstructure and fatigue life of TiC-Cr overlay, produced by plasma transferred arc alloying Shi KY, Hu SB, Liang LJ
730 - 738	Preparation and tribological properties of graphene oxide/nitrile rubber nanocomposites Li YQ, Wang QH, Wang TM, Pan GQ
739 - 745	Enhancement of thermal stability of TiO2 nanowires embedded in anodic aluminum oxide template Wang XL
746 - 753	Hydrothermal synthesis of quasi-monodisperse AWO(4) (A = Ca, Sr, and Ba) microspheres Pan HL, Hojamberdiev M, Zhu GQ
754 - 763	Synthesis and cytocompatibility of manganese (II) and iron (III) substituted hydroxyapatite nanoparticles Li Y, Widodo J, Lim S, Ooi C
764 - 771	Changes on the nanostructure of cementitius calcium silicate hydrates (C-S-H) induced by aqueous carbonation Morales-Florez V, Findling N, Brunet F
772 - 778	Judd-Ofelt theory: optical absorption and NIR emission spectral studies of Nd3+:CdO-Bi2O3-B2O3 glasses for laser applications Raju CN, Reddy CA, Sailaja S, Seo HJ, Reddy BS
779 - 792	On the development of microstructures and residual stresses during laser cladding and post-heat treatments Chen JY, Wang SH, Xue LJ
793 - 796	Quantitative metallographic assessment of the electromagnetic casting influence on the microstructure of 7075 Al alloy Pataric A, Mihailovic M, Gulisija Z
797 - 803	Electronic and magnetic properties of Fe3-x Cr (x) Si ordered alloys from first principles Hamad B, Khalifeh J, Hu QM, Demangeat C
804 - 814	Kinetics of dissolution-precipitation reaction at the surface of small particles: modelling and application Tomellini M
815 - 823	Studying grain boundary regions in polycrystalline materials using spherical nano-indentation and orientation imaging microscopy Pathak S, Michler J, Wasmer K, Kalidindi SR
824 - 832	Interfacial nature of Ag nanoparticles supported on TiO2 photocatalysts Kang JG, Sohn Y
833 - 844	Mechanism of synthesizing dense Si-SiC matrix C/C composites Hanzawa S
845 - 851	Preparation and characterization of a quaternized chitosan Huang RH, Yang BC, Zheng DS, Wang B
852 - 859	Carbon supported silver (Ag/C) electrocatalysts for alkaline membrane fuel cells Vinodh R, Sangeetha D
860 - 865	Hopping conduction on carbon black/styrene-butadiene-styrene composites Rubinger CPL, Leyva ME, Soares BG, Ribeiro GM, Rubinger RM
866 - 875	Effect of joint gap on the quality of laser beam welded near-beta Ti-5553 alloy with the addition of Ti-6Al-4V filler wire Shariff T, Cao X, Chromik RR, Wanjara P, Cuddy J, Birur A
876 - 882	Microstructure and elastic tensile behavior of polyethylene terephthalate-exfoliated graphene nanocomposites Bandla S, Hanan JC
883 - 891	A neural network approach for the prediction of the refractive index based on experimental data Alexandridis A, Chondrodima E, Moutzouris K, Triantis D
892 - 897	Optical studies on lanthanum-doped calcium fluoride Pandurangappa C, Lakshminarasappa BN
898 - 901	Synthesis and luminescence properties of rare earth doped gamma-ray-irradiated GdCa4O(BO3)(3) phosphors Mishra GC, Upadhyay AK, Kher RS, Dhoble SJ
902 - 918	The characterisation of the interfacial chemistry of adhesion of rigid polyurethane foam to aluminium Shimizu K, Abel ML, Phanopoulos C, Holvoet S, Watts JF
919 - 928	Structural features of polyacrylonitrile-based carbon fibers Li W, Long DH, Miyawaki J, Qiao WM, Ling LC, Mochida I, Yoon SH
929 - 948	Prediction of hot deformation behavior of Al-5.9%Cu-0.5%Mg alloys with trace additions of Sn Banerjee S, Robi PS, Srinivasan A
949 - 959	Tensile strength of windmill palm (Trachycarpus fortunei) fiber bundles and its structural implications Zhai SC, Li DG, Pan B, Sugiyama J, Itoh T
960 - 968	Effect of pre-strain on grain size distributions in 316H austenitic stainless steel Mahalingam S, Flewitt PEJ, Knott JF
969 - 975	Using liquid crystals for the real-time detection of urease at aqueous/liquid crystal interfaces Hu QZ, Jang CH
976 - 989	Effect of polymers on the nanostructure and on the carbonation of calcium silicate hydrates: a scanning transmission X-ray microscopy study Ha J, Chae S, Chou KW, Tyliszczak T, Monteiro PJM
990 - 998	Effects of thermal treatments on the structure of two black coral species chitinous exoskeleton Juarez-de La Rosa BA, Quintana P, Ardisson PL, Yanez-Limon JM, Alvarado-Gil JJ
999 - 1003	Synthesis and capacitive property of delta-MnO2 with large surface area Zhang X, Chang XP, Chen N, Wang K, Kang LP, Liu ZH
1004 - 1010	On measurement of carbon content in retained austenite in a nanostructured bainitic steel Garcia-Mateo C, Caballero FG, Miller MK, Jimenez JA
1011 - 1017	The influence of nano-silica on the hydration of ordinary Portland cement Land G, Stephan D
1018 - 1025	Effect of temperature, chloride ion and pH on the crevice corrosion behavior of SAF 2205 duplex stainless steel in chloride solutions Han D, Jiang YM, Shi C, Deng B, Li J
1026 - 1032	A facile synthesis of graphene-metal (Pb, Zn, Cd, Mn) sulfide composites Fu XQ, Jiang TS, Zhao Q, Yin HB
1033 - 1037	Controllable synthesis and morphology-dependent microwave absorption properties of iron nanocrystals Liu QC, Zi ZF, Wu DJ, Sun YP, Dai JM
1038 - 1045	Fabrication and characterization of polymethylmethacrylate/polysulphone/beta-tricalcium phosphate composite for orthopaedic applications Bhat KA, Rajangam P, Dharmalingam S
1046 - 1053	Direct fluorination as a novel organophilic modification method for the preparation of Illite/polypropylene nanocomposites Kim J, Jeong E, Lee YS
1054 - 1058	Ibuprofen loaded porous calcium phosphate nanospheres for skeletal drug delivery system Shao FW, Liu L, Fan KJ, Cai YR, Yao JM
1059 - 1070	Carbon black/graphite nanoplatelet/rubbery epoxy hybrid composites for thermal interface applications Raza MA, Westwood A, Stirling C
1071 - 1076	Evaluation of photoanodic output on carbon cluster/phthalocyanine films with respect to the types of n-type conductors employed Abe T, Nakamura K, Ichinohe H, Nagai K
1077 - 1084	Elaboration and mechanical characterization of multi-phase alumina-based ultra-fine composites Palmero P, Sola A, Naglieri V, Bellucci D, Lombardi M, Cannillo V
1085 - 1093	Effect of the LPSO volume fraction on the microstructure and mechanical properties of Mg-Y-2X -Zn (X) alloys Onorbe E, Garces G, Perez P, Adeva P
1094 - 1099	Incorporation of lanthanide ions in lead titanate Pelaiz-Barranco A, Mendez-Gonzalez Y, Arnold DC, Saint-Gregoire P, Keeble DJ