| 8387 - 8390 |
Preparation of Sb3Nb3O13 powders using molten salt method
Zhou D, Wang H, Zhou HF, Xie XJ, Yao X, Cheng YH |
| 8391 - 8399 |
Effects of particle size and structure of carbon blacks on the abrasion of filled elastomer compounds
Hong CK, Kim H, Ryu C, Nah C, Huh YI, Kaang S |
| 8400 - 8407 |
Fabrication of nanocomposite membranes from nanofibers and nanoparticles for protection against chemical warfare stimulants
Sundarrajan S, Ramakrishna S |
| 8408 - 8417 |
Effect of surface modification of nanosilica on crystallization, thermal and mechanical properties of poly(vinylidene fluoride)
Song R, Yang D, He LH |
| 8418 - 8425 |
Effect of solvent exchanging process on the preparation of the hydrophobic silica aerogels by ambient pressure drying method using sodium silicate precursor
Rao AP, Rao AV, Pajonk GM, Shewale PM |
| 8426 - 8432 |
The use of Raman spectroscopy as a versatile characterization tool for calcium sulphoaluminate cements: a compositional and hydration study
Gastaldi D, Boccaleri E, Canonico F, Bianchi M |
| 8433 - 8437 |
Effect of Nb2O5 additions on the power loss of NiZn ferrites
Parvatheeswara B, Kim C |
| 8438 - 8446 |
Effects of milling time and calcination condition on phase formation and particle size of lead zirconate nanopowders prepared by vibro-milling
Khamman O, Sarakonsri T, Rujiwatra A, Laosiritaworn Y, Yimnirun R, Ananta S |
| 8447 - 8453 |
Pulsed plasma nitriding of large components and coupons of chrome plated SS316LN stainless steel
Dasgupta A, Kuppusami P, Vijayalakshmi M, Raghunathan VS |
| 8454 - 8460 |
Micromorphologic assessment of CVD (chemical vapor deposition) and conventional diamond tips and their cutting effectiveness
Predebon JC, Lima LM, Florio FM, dos Santos-Pinto L, Basting RT |
| 8461 - 8464 |
Synthesis and temperature dependent photoluminescence of Zn(1-x)Mg(x)Ofilms grown by ultrasonic spray pyrolysis
Bian JM, Luo YM, Sun JC, Liang HW, Liu WF, Hu LZ |
| 8465 - 8469 |
Tribological properties of PTFE composites filled with surface-treated carbon fiber
Shi YJ, Feng X, Wang HY, Lu XH |
| 8470 - 8472 |
Fabrication of Cr2O3/Al2O3 composite nanofibers by electrospinning
Yang XH, Shao CL, Liu YC |
| 8473 - 8480 |
Effect of metal type and content on mechanical, electrical and free-volume properties of styrenated polyesters
Mansour SH, Gomaa E, Bishay IK |
| 8481 - 8488 |
Study on swelling of hydrogels (PAAm) at various temperatures by using fluorescence technique
Aktas DK, Evingur GA, Pekcan O |
| 8489 - 8495 |
Thermodynamic analysis of thermite reactions for synthesizing Ni-based alloys
Xi WJ, Zhou HP, Ma CL, Duan HP, Zhang T |
| 8496 - 8500 |
The optical properties of porous silicon produced by metal-assisted anodic etching
Zhao Y, Li DS, Sang WB, Yang D, Jiang MH |
| 8501 - 8508 |
Investigation of thermoluminescence properties of metal oxide doped lithium triborate
Oezemir Z, Ozbayoglu G, Yilmaz A |
| 8509 - 8516 |
Viscoelasticity studies for a fibrous collagen material: chrome-free leather
Liu CK, Latona NP, DiMaio GL, Cooke PH |
| 8517 - 8522 |
Formation of submicron of periodic structure in high-clean suspensions
Kazantseva LK |
| 8523 - 8528 |
Corrosion and wear resistance of AZ91D magnesium alloy with and without microarc oxidation coating in Hank's solution
Zhang XP, Zhao ZP, Wu FM, Wang YL, Wu J |
| 8529 - 8536 |
A recording microindentation instrument for in situ study of crack initiation in glass
Wilantewicz TE, Varner JR |
| 8537 - 8543 |
Surface activity of perfluoropolyalkylether N,N-diphenylamide (PFPEA)
Gu GT, Yu MH, Meng WD, Qing FL |
| 8544 - 8550 |
Flame retardancy of paulownia wood and its mechanism
Li P, Oda J |
| 8551 - 8557 |
Effect of panel density on dimensional stability of medium and high density fiberboards
Ayrilmis N |
| 8558 - 8570 |
Effect of Al2O3 concentration on zirconolite (Ca(Zr,Hf)Ti2O7) crystallization in (TiO2,ZrO2,HfO2)-rich SiO2-Al2O3-CaO-Na2O glasses
Caurant D, Loiseau P, Bardez I, Gervais C |
| 8571 - 8580 |
Synthesis, characterization and thermal studies of polymer-metal complexes derived from poly(2-methacryloxy-5-methyl benzophenone)-divinylbenzene isonicotinoyl hydrazone resins
Sankar TR, Kesavulu K, Ramana PV |
| 8581 - 8591 |
Synthesis and characterization of porous kappa-carrageenan/calcium phosphate nanocomposite scaffolds
Daniel-da-Silva AL, Lopes AB, Gil AM, Correia RN |
| 8592 - 8598 |
Study of structure and properties of ZnO-Bi2O3-P2O5 glasses
Jirak J, Koudelka L, Pospisil J, Mosner P, Montagne L, Delevoye L |
| 8599 - 8605 |
Study on synthesis and properties of hydroxyapatite nanorods and its complex containing biopolymer
Huang FZ, Shen YH, Xie AJ, Zhu JM, Zhang CY, Li SK, Zhu J |
| 8606 - 8612 |
The influence of the coprecipitation conditions on the low-temperature formation of barium hexaferrite
Lisjak D, Drofenik M |
| 8613 - 8617 |
Electrochemical characterization of metastable pitting of 3003 aluminum alloy in ethylene glycol-water solution
Niu L, Cheng YF |
| 8618 - 8621 |
Viscosity and electrical conductivity of liquid Sn-Ti and Sn-Zr alloys
Plevachuk Y, Mudry S, Sklyarchuk V, Yakymovych A, Klotz UE, Roth M |
| 8622 - 8628 |
Influence of mechanical working on properties of aluminium base short steel fiber reinforced composites
Mandal D, Dutta BK, Panigrahi SC |
| 8629 - 8635 |
Mechanical properties of porous crosslinked poly(ethyl-acrylate) for tissue engineering
Estelles JM, Krakovsky I, Hernandez JCR, Piotrowska AM, Pradas MM |
| 8636 - 8644 |
A comparative study of the fatigue and post-fatigue behavior of carbon-glass/epoxy hybrid RTM and hand lay-up composites
Cavatorta MP |
| 8645 - 8651 |
Analysis of brittle-ductile transition of polypropylene/ethylene-octene copolymer blends by scanning electron microscopy and small angle laser light scattering
Yan XL, Xu XH, Zhu L |
| 8652 - 8661 |
Damage evaluation of refractories under cyclic loading-unloading processes using ultrasonic method
Furushima R, Matsuo Y, Shiota T, Yasuda K |
| 8662 - 8666 |
Gd-Ni-Al bulk glasses with great glass-forming ability and better mechanical properties
Chen D, Takeuchi A, Inoue A |
| 8667 - 8670 |
The calculation of magnetic induction in grain orientated ultra-thin silicon steel sheets
Gao XH, Qi KM, Qiu CL, Tian YW |
| 8671 - 8689 |
Synthesis and characterization of carbon nanotubes grown on montmorillonite clay catalysts
Destree A, Long GJ, Vatovez B, Grandjean F, Fonseca A, Nagy JB, Fransolet AM |
| 8690 - 8694 |
Electronic properties of AlVO4 for gas sensor applications
Palomares-Sanchez SA, Chumakov YM, Ponce-Castaneda S, Watts BE, Leccabue F, Bocelli G |
| 8695 - 8699 |
Effect of nanosized ferric oxide on the thermostability of methylsilicone resin
Min CY, Huang YD, Liu L |
| 8700 - 8706 |
Effect of rubber particle size on the impact tensile fracture behavior of MBS resin with a bimodal particle size distribution
Arakawa K, Mada T, Takahashi J, Todo M, Ooka S |
| 8707 - 8713 |
Fabrication of conductive SrRuO3 thin film and Ba0.60Sr0.40TiO3/SrRuO3 bilayer films on MgO substrate
Qin WF, Ai WY, Zhu J, Xiong J, Tang JL, Zhang Y, Li YR |
| 8714 - 8724 |
Influence of melt treatments and turning inserts on cutting force and surface integrity in turning of Al-7Si and Al-7Si-2.5Cu cast alloys
Basavakumar KG, Mukunda PG, Chakraborty M |
| 8725 - 8737 |
Cutting characteristics of beard hair
Thozhur SM, Crocombe AD, Smith PA, Cowley K, Mullier M |
| 8738 - 8744 |
Structural features and magnetic property of nano-sized transition metal dispersed carbons from naphthalene by pressure
Chen XH, Song HAH |
| 8745 - 8752 |
A study of the influence of muscovite on the thermal transformations of kaolinite from room temperature up to 1,100 degrees C
Lecomte GL, Bonnet JP, Blanchart P |
| 8753 - 8756 |
Permittivity and loss tangent of unpoled LaSr-doped PZT under compressive loading
Fett T, Kungl H, Hoffmann MJ |
| 8757 - 8759 |
Simultaneous measurement of rheological and conductive properties of carbon black filled ethylene-tetrafluorothylene copolymer
Liu ZH, Song YH, Zhou JF, Zheng Q |
| 8760 - 8764 |
Porous alumina ceramics produced with lycopodium spores as pore-forming agents
Zivcova Z, Gregorova E, Pabst W |
