| 5441 - 5451 |
Negative thermal expansion: a review
Miller W, Smith CW, Mackenzie DS, Evans KE |
| 5452 - 5458 |
Effect of abnormal grain growth on tensile strength of Al-Cu-Mg alloy friction stir welded joints
Safarkhanian MA, Goodarzi M, Boutorabi SMA |
| 5459 - 5468 |
Kinetic study of controlled release of VPA and DPH antiepileptic drugs using biocompatible nanostructured sol-gel TiO2
Lopez T, Alexander-Katz R, Castillo P, Gonzalez M, Manjarrez J, Gonzalez RD, Ilharco L, Fidalgo A, Rieumont J |
| 5469 - 5474 |
Electrical characterization of LiTaO3:P(VDF-TrFE) composites
Guggilla P, Batra AK, Edwards ME |
| 5475 - 5484 |
Effect of hot compression and annealing on microstructure evolution of ZK60 magnesium alloys
Wang SR, Kang SB, Cho J |
| 5485 - 5493 |
The fabrication of a MWNTs-polymer composite chemoresistive sensor array to discriminate between chemical toxic agents
Chang CP, Yuan CL |
| 5494 - 5500 |
Powder metallurgical fabrication of zirconium matrix cermet nuclear fuels
Totemeier AR, McDeavitt SM |
| 5501 - 5508 |
Three-jet electrospinning using a flat spinneret
Zhou FL, Gong RH, Porat I |
| 5509 - 5514 |
Thermal properties and microstructure of bulk nanocrystalline Gd material
Zeng H, Kuang CJ, Zhang JX, Yue M |
| 5515 - 5523 |
Magnetoelectric and electrical properties of WO3-doped (Ni0.8Zn0.1Cu0.1)Fe2O4/[Pb(Ni1/3Nb2/3)O-3-Pb(Zn1/3Nb2/3)O-3-PbTiO3] composites
Sun RB, Fang BJ, Dong XW, Liu JM |
| 5524 - 5536 |
A combined synchrotron powder diffraction and vibrational study of the thermal treatment of palygorskite-indigo to produce Maya blue
del Rio MS, Boccaleri E, Milanesio M, Croce G, van Beek W, Tsiantos C, Chyssikos GD, Gionis V, Kacandes GH, Suarez M, Garcia-Romero E |
| 5537 - 5543 |
On the essential work of fracture in polymer-metal multilayers
Garnier G, Chehab B, Yrieix B, Brechet Y, Flandin L |
| 5544 - 5551 |
Mechanical characterization of anti-infectious, anti-allergic, and bioactive coatings on orthopedic implant surfaces
Fritsche A, Haenle M, Zietz C, Mittelmeier W, Neumann HG, Heidenau F, Finke B, Bader R |
| 5552 - 5556 |
Compression properties of cellular AlCu5Mn alloy foams with wide range of porosity
Yang DH, Yang SR, Ma AB, Jiang JH |
| 5557 - 5562 |
Electrical conductivity, relaxation, and scaling analysis studies of lithium alumino phosphate glasses and glass ceramics
Sharma MVNVD, Sarma AV, Rao RB |
| 5563 - 5568 |
Synthesis and characterization of BaTiO3-based X9R ceramics
Li LX, Han YM, Zhang P, Ming C, Wei X |
| 5569 - 5578 |
Interfacial study of Crofer 22 APU interconnect-SABS-0 seal glass for solid oxide fuel/electrolyzer cells
Mahapatra MK, Lu K |
| 5579 - 5587 |
Structural study of Li2MnO3 by electron microscopy
Lei CH, Wen JG, Sardela M, Bareno J, Petrov I, Kang SH, Abraham DP |
| 5588 - 5594 |
Effect of fibre concentration, temperature and mould thickness on weldline integrity of short glass-fibre-reinforced polypropylene copolymer composites
Hashemi S, Onishi P |
| 5595 - 5601 |
Electromigration behaviors in Sb particle-reinforced composite eutectic SnAgCu solder joints
Guo F, Xu GC, He HW |
| 5602 - 5608 |
The effect of heat treatment on mechanical properties of carbon nanofiber reinforced copper matrix composites
Kang JL, Nash P, Li JJ, Shi CS, Zhao NQ, Gu SJ |
| 5609 - 5617 |
Reaction progress of alkaline-activated metakaolin-ground granulated blast furnace slag blends
Buchwald A, Tatarin R, Stephan D |
| 5618 - 5626 |
Pressure effects on elastic and thermodynamic properties of ZrB2
Fu HZ, Lu Y, Liu WF, Gao T |
| 5627 - 5635 |
Precipitation hardening of Zr-modified Mg-Ca-Zn alloy
Shepelev D, Bamberger M, Katsman A |
| 5636 - 5643 |
Electron spin resonance study of Mo(V) ion species incorporated into aluminosilicate nanospheres with solid core/mesoporous shell structure
Back G, Lee H, Kim M, Yu JS, Jeong S, Chae YB |
| 5644 - 5653 |
Mold-filling characteristics and solidification behavior of magnesium alloy in vacuum suction casting process
Teng HT, Li TJ, Zhang XL, Bai FD, Qi K |
| 5654 - 5661 |
Effect of combining plane-strain compression with equal channel angular pressing on mechanical properties and texture development in an Al alloy
Almajid AA, El-Danaf EA, Soliman MS |
| 5662 - 5672 |
Preparation and characterization of composite materials obtained by pressure infiltration of aluminum in sintered SiC/kaolin preforms
Freitas N, Pianaro SA, Tebcherani SM, Nadal FN, Berg EAT |
| 5673 - 5681 |
Oxidation resistance of hafnium diboride-silicon carbide from 1400 to 2000 A degrees C
Carney CM |
| 5682 - 5687 |
Study on the structure of SF fiber mats electrospun with HFIP and FA and cells behavior
Zhang F, Zuo BQ, Bai L |
| 5688 - 5691 |
Preparation of polycrystalline bulk Mg2Si by using NaSi
Yamada T, Oishi Y, Morito H, Yamane H |
| 5692 - 5696 |
SIMS analysis of low content hydrogen in commercially pure titanium
Hamada S, Ohnishi K, Nishikawa H, Oda Y, Noguchi H |
| 5697 - 5699 |
Diameter variability and strength scatter of elementary flax fibers
Sparnins E, Andersons J |
