| 6849 - 6877 |
One-dimensional ZnO nanostructures: fabrication, optoelectronic properties, and device applications
Panda D, Tseng TY |
| 6878 - 6884 |
Hydrothermal synthesis of bismuth sodium titanate particles with different morphologies
Ma X, Zhang WX, Xue LH, Yin SM, Wan L, Yan YW |
| 6885 - 6890 |
Determination of SBA-15 acidity through n-butyl amine TPD: a theoretical and experimental study
Luz GE, Lima FCA, Neto COC, Paz GL, Silva EFB, Barbosa MN |
| 6891 - 6896 |
Electrodeposition of graphene layers doped with BrI center dot nsted acids
Lee S, Cho MS, Lee H, Pu LS, Lee Y |
| 6897 - 6904 |
The reason for an upper limit to the height of spinnable carbon nanotube forests
Lee J, Oh E, Kim HJ, Cho S, Kim T, Lee S, Park J, Kim H, Lee KH |
| 6905 - 6910 |
Analysis methods for characterizing ferroelectric/ferroelastic domain reorientation in orthorhombic perovskite materials and application to Li-doped Na0.5K0.5NbO3
Iamsasri T, Tutuncu G, Uthaisar C, Pojprapai S, Jones JL |
| 6911 - 6920 |
Use of microfibrillated cellulose and dendritic copper for the elaboration of conductive films from water- and ethanol-based dispersions
Pras O, Beneventi D, Chaussy D, Piette P, Tapin-Lingua S |
| 6921 - 6928 |
Spectroscopic properties of CuO, SnO, and Dy2O3 co-doped phosphate glass: from luminescent material to plasmonic nanocomposite
Jimenez JA, Hockenbury JB |
| 6929 - 6942 |
Blends of unsaturated polyester and phenolic resins for application as fire-resistant matrices in fibre-reinforced composites. Part 1: identifying compatible, co-curable resin mixtures
Deli D, Kandola BK, Ebdon JR, Krishnan L |
| 6943 - 6951 |
Effect of the fabrication method on the functional properties of BaTiO3: PVDF nanocomposites
Chiolerio A, Lombardi M, Guerriero A, Canavese G, Stassi S, Gazia R, Cauda V, Manfredi D, Chiodoni A, Verna A, Cocuzza M, Montanaro L, Pirri CF |
| 6952 - 6959 |
The use of a nanocellulose-reinforced polyacrylonitrile precursor for the production of carbon fibers
Park SH, Lee SG, Kim SH |
| 6960 - 6969 |
(111)-Oriented Co0.8Fe2.2O4+delta thin film grown by pulsed laser deposition: structural and magnetic properties
Khodaei M, Ebrahimi SAS, Park YJ, Choi SH, Kim C, Son J, Baik S |
| 6970 - 6976 |
Surface wrinkling: the phenomenon causing bees in bitumen
Lyne AL, Wallqvist V, Rutland MW, Claesson P, Birgisson B |
| 6977 - 6985 |
Room temperature hardness of gadolinia-doped ceria as a function of porosity
Fan XF, Case ED, Yang Q, Nicholas JD |
| 6986 - 6993 |
Vibration-dependent morphology and crystal structure of isotactic polypropylene
Wang ZW, Hu J, An FZ, Gong JW, Gao XQ, Deng C, Shen KZ |
| 6994 - 7003 |
Synthesis and structural characterization of alpha-MoO3 from molybdic acid wastewater
Chiang TH, Chen MY, Li MH, Yen MY |
| 7004 - 7010 |
A versatile click-grafting approach to surface modification of silk fibroin films
Galeotti F, Andicsova A, Bertini F, Botta C |
| 7011 - 7021 |
Enhancement of thermal and mechanical properties of flexible graphene oxide/carbon nanotube hybrid films though direct covalent bonding
Hwang Y, Kim M, Kim J |
| 7022 - 7027 |
Effects of trace amount of nanometric SiC additives with wire or particle shapes on the mechanical and thermal properties of alumina matrix composites
Jiraborvornpongsa N, Imai M, Yoshida K, Yano T |
| 7028 - 7035 |
Impedance spectroscopy studies of bulk electrical conduction in A-site acceptor (K)-doped BaTiO3
Ren PR, Fan HQ, Wang X |
| 7036 - 7041 |
Synthesis of hexagonal graphene on polycrystalline Cu foil from solid camphor by atmospheric pressure chemical vapor deposition
Sharma S, Kalita G, Ayhan ME, Wakita K, Umeno M, Tanemura M |
| 7042 - 7054 |
Ordered mesoporous silica fibers: effects of synthesis conditions on fiber morphology and length
Seshadri SK, Alsyouri HM, Lin YS |
| 7055 - 7062 |
Influence of poly(ethylene glycol) block length on the adsorption of thermoresponsive copolymers onto gold surfaces
Bayati S, Pamies R, Volden S, Zhu KZ, Kjoniksen AL, Glomm WR, Nystrom B |
| 7063 - 7070 |
Thermal and mechanical properties of poly(trimethyelene terephthalate)/acid-treated multiwalled carbon nanotube composites
Gupta A, Choudhary V |
| 7071 - 7080 |
The role of ferrocene on the enhancement of the mechanical and electrochemical properties of coal tar pitch-based carbon foams
Kumar R, Dhakate SR, Mathur RB |
| 7081 - 7087 |
Quantitative fractography of mixed-mode fracture in an R-curve material
Gopalakrishnan K, Mecholsky JJ |
| 7088 - 7096 |
Preparation and characterization of micro and nanocomposites based on poly(vinyl alcohol) for packaging applications
Ollier RP, Perez CJ, Alvarez VA |
| 7097 - 7103 |
Biocompatibility of novel carboxylated graphene oxide-glutamic acid complexes
Zhou NL, Gu H, Tang FF, Li WX, Chen YY, Yuan J |
| 7104 - 7114 |
Enhanced open-circuit voltage in organic photovoltaic cells with partially chlorinated zinc phthalocyanine
Fleetham TB, Bakkan N, Mudrick JP, Myers JD, Cassidy VD, Cui JB, Xue JG, Li J |
| 7115 - 7124 |
Low temperature TLP bonding of Al2O3-ceramics using eutectic Au-(Ge, Si) alloys
Weyrich N, Leinenbach C |
| 7125 - 7133 |
Characteristics of curcumin-loaded poly (lactic acid) nanofibers for wound healing
Nguyen TTT, Ghosh C, Hwang SG, Tran LD, Park JS |
| 7134 - 7141 |
Strain rate-dependant mechanical properties of OFHC copper
Jordan JL, Siviour CR, Sunny G, Bramlette C, Spowart JE |
| 7142 - 7152 |
Cellular automata modeling of static recrystallization based on the curvature driven subgrain growth mechanism
Han FB, Tang B, Kou HC, Li JS, Feng Y |
| 7153 - 7161 |
Trends in wetting behavior for Ag-CuO braze alloys on Ba0.5Sr0.5Co0.8Fe0.2O(3-delta) at elevated temperatures in air
Joshi VV, Meier A, Darsell J, Weil KS, Bowden M |
| 7162 - 7170 |
Absorption spectra and photocurrent densities of Ag nanoparticle/TiO2 composite thin films with various amounts of Ag
Daniel LS, Nagai H, Sato M |
| 7171 - 7183 |
On the dehydroindigo contribution to Maya Blue
Domenech-Carbo A, Domenech-Carbo MT, Valle-Algarra FM, Domine ME, Osete-Cortina L |
| 7184 - 7195 |
Catalytic study of SOFC electrode materials in engine exhaust gas atmosphere
Briault P, Rieu M, Laucournet R, Morel B, Viricelle JP |
| 7196 - 7203 |
Bio-nanocomposites based on derivatized potato starch and cellulose, preparation and characterization
Moran JI, Vazquez A, Cyras VP |
| 7204 - 7214 |
Conventional and microwave-assisted processing of Cu-loaded ICAs for electronic interconnect applications
Qi SY, Vaidhyanathan B, Hutt D |
| 7215 - 7223 |
Surface modification of natural and synthetic hydroxyapatites powders by grafting polypyrrole
Yala S, Khireddine H, Sidane D, Ziani S, Bir F |
| 7224 - 7237 |
Adsorption characteristic of copper ions and its application in electroless nickel plating on a hydrogel-functionalized poly(vinyl chloride) plastic
Wang MQ, Yan J, Du SG, Zeng JW, Chang WP, Guo Y, Li HG |
| 7238 - 7244 |
Glassy magnetic behavior in the metamagnetic DyAlO3 doped with Cr
Escudero R, Ruiz-Herrera BL, Jimenez MP, Morales F |
| 7245 - 7252 |
Effects of 3D structure of silsesquioxane moieties on the thermal and optical properties of transparent epoxy/silsesquioxane hybrid materials
Ochi M, Uno Y, Harada M |
| 7253 - 7259 |
Density-controllable growth of SnO2 nanowire junction-bridging across electrode for low-temperature NO2 gas detection
Le DTT, Duy NV, Tan HM, Trung DD, Trung NN, Van PTH, Hoa ND, Hieu NV |
| 7260 - 7273 |
Structure-properties relationship in single polymer composites based on polyamide 6 prepared by in-mold anionic polymerization
Dencheva N, Denchev Z, Pouzada AS, Sampaio AS, Rocha AM |
| 7274 - 7282 |
A selective ethanol gas sensor based on spray-derived Ag-ZnO thin films
Tarwal NL, Rajgure AV, Patil JY, Khandekar MS, Suryavanshi SS, Patil PS, Gang MG, Kim JH, Jang JH |
| 7283 - 7293 |
From cellulosic waste to nanocomposites. Part 2: synthesis and characterization of polyurethane/cellulose nanocomposites
Meyabadi TF, Sadeghi GMM, Dadashian F, Asl HEZ |
| 7294 - 7299 |
Dielectric relaxations and phase-transition-like behavior in SmAlO3 ceramics at high temperatures
Lei CM, Wang CC, Li T, Wang GJ, Sun XH, Liu LN, Wang J |
| 7300 - 7311 |
Effect of copper content on optostructural, morphological and photoelectrochemical properties of MoBi2-x Cu (x) Se-4 thin films
Kharade SD, Pawar NB, Mali SS, Hong CK, Patil PS, Gang MG, Kim JH, Bhosale PN |
| 7312 - 7319 |
Preparation of MgH2-Ni, MgH2-Ni-Si and MgH2-Ni-Ni2Si composites by mechanochemical method and their hydrogen absorption and desorption properties
Shimada M, Tamaki H, Higuchi E, Inoue H |
