| 5263 - 5273 |
The erosive wear of mild and stainless steels under controlled corrosion in alkaline slurries containing alumina particles
Wang HW, Stack MM |
| 5275 - 5282 |
Preparation of alkaline earth carbonates and oxides by the EDTA-gel process
Hodgson SNB, Shen X, Sale FR |
| 5283 - 5289 |
Stability of SrZr0.9Yb0.1O3-alpha protonic conductor in atmosphere containing nitrogen oxides (NOx)
Kobayashi T, Morishita S, Honma T, Abe K, Ukyo Y, Iwahara H |
| 5291 - 5294 |
O-2, CH4 and CO2 gas retentions by acid smectites before and after thermal treatment
Volzone C, Ortiga J |
| 5295 - 5299 |
Synthesis and characterization of cadmium titanium oxide powders by sol-gel technique
Phani AR, Passacantando M, Santucci S |
| 5301 - 5307 |
Effect of particle packing on extrusion behavior of pastes
Chen ZC, Ikeda K, Murakami T, Takeda T |
| 5309 - 5312 |
Fabrication of polymer matrix composites reinforced with controllably oriented whiskers
Chen LF, Hong YP, Zhang Y, Qiu JL |
| 5313 - 5318 |
FTIR investigations of solid precursor materials for sol-gel deposition of WO3 based electrochromic films
Deepa M, Sharma N, Varshney P, Varma SP, Agnihotry SA |
| 5319 - 5329 |
Evaluation of volume fraction of solid in alloys formed by semisolid processing
Tzimas E, Zavaliangos A |
| 5331 - 5339 |
Damage threshold velocities for liquid impact
Kennedy CF, Field JE |
| 5341 - 5345 |
Nitriding of iron boride to hexagonal boron nitride
Warner TE, Fray DJ |
| 5347 - 5351 |
Short thermal fatigue crack propagation behavior of alumina short fibre reinforced aluminum matrix composites
Wu SQ, Xu WJ |
| 5353 - 5358 |
Infrared spectroscopic evaluation of the photodegradation of paint - Part II: The effect of UV intensity & wavelength on the degradation of acrylic films pigmented with titanium dioxide
Christensen PA, Dilks A, Egerton TA, Temperley J |
| 5359 - 5369 |
Multi-length scale modeling of CVD of diamond - Part I - A combined reactor-scale/atomic-scale analysis
Grujicic M, Lai SG |
| 5371 - 5381 |
Multi-length scale modeling of CVD of diamond - Part II - A combined atomic-scale/grain-scale analysis
Grujicic M, Lai SG |
| 5383 - 5387 |
Pressureless sintering of metal-bonded diamond particle composite blocks
Hsieh YZ, Chen JF, Lin ST |
| 5389 - 5400 |
Effect of rare-earth oxide(CeO2) on the microstructures in laser melted layer
Zhang YM, Hida M, Hashimoto H, Luo ZP, Wang SX |
| 5401 - 5405 |
Mechanochemical synthesis of hydroxyapatite from Ca(OH)(2)-P2O5 and CaO-Ca(OH)(2)-P2O5 mixtures
Kim W, Zhang QW, Saito F |
| 5407 - 5413 |
Effect of a cerium/tin doping mixture on the texturing process and on the superconducting properties of top seeded melt textured YBaCuO
Leblond-Harnois C, Monot I, Desgardin G |
| 5415 - 5420 |
Preparation of nanosized LaCoO3 perovskite oxide using amorphous heteronuclear complex as a precursor at low temperature
Zhu YF, Tan RQ, Yi T, Ji SS, Ye XY, Cao LL |
| 5421 - 5425 |
Ferroelectric and dielectric properties of ferroelectromagnet Pb(Fe1/2Nb1/2)O-3 ceramics and thin films
Gao XS, Chen XY, Yin J, Wu J, Liu ZG, Wang M |
| 5427 - 5432 |
Examination of the thermophysical bond of insert-molded PC/C fiber composites
Extrand CW, Bhatt S |
| 5433 - 5436 |
Sintering characteristics and dielectric properties of silver-doped PMN-PZN-PT relaxor ferroelectric ceramics
Zuo RZ, Li LT, Chen RZ, Gui ZL |
| 5437 - 5442 |
Effect of calcination conditions of self-sintering mesocarbon microbeads on the characteristics of resulting graphite
Aggarwal RK, Bhatia G, Bahl OP, Punjabi N |
| 5443 - 5447 |
Effect of V2O5 and CuO additives on sintering behavior and microwave dielectric properties of BiNbO4 ceramics
Huang CL, Weng MH, Shan GM |
| 5449 - 5455 |
Tensile failure in fiber reinforced ceramic matrix composites
Chiang YC |
| 5457 - 5463 |
Biaxial dielectric properties of phenyl ester ferroelectric liquid crystal mixture
Kim YB, Hur IK, Choi JW, Buivydas M, Gouda F, Lagerwall ST |
| 5465 - 5474 |
Investigating the influence of fabrication process and crystal orientation on shear strength of silicon microcomponents
Chen QF, Yao DJ, Kim CJ, Carman GP |
| 5475 - 5483 |
Phase evolution and microstructural development in sol-gel derived MSnO3 (M = Ca, Sr and Ba)
Azad AM, Hashim M, Baptist S, Badri A, Haq AU |
| 5485 - 5492 |
Reaction of Si3N4 with 25%Cr-20%Ni austenitic stainless steel under nitrogen or argon atmosphere
Shimoo T, Okamura K, Shibata D |
| 5493 - 5496 |
Surface treatments in fluidized bed reactors
Tsipas DN, Flitris Y |
| 5497 - 5501 |
The tribological characteristics of the Al-20Si-3Cu-1Mg alloy reinforced with Al2O3 particles in relation to the hardness of a mating steel
Bialo D, Zhou J, Duszczyk J |
| 5503 - 5507 |
Particle packing and rheological property of highly-concentrated ceramic suspensions: phi(m) determination and viscosity prediction
Liu DM |
| 5509 - 5515 |
Sintering behaviour of slip-cast Al2O3-Y-TZP composites
Ramesh S, Siah LF, Azmah AKN |
| 5517 - 5521 |
Aligned conical carbon nanotubes
Chen Y, Guo LP, Patel S, Shaw DT |
| 5523 - 5526 |
Cation distribution of the system CuAlxFe2-xO4 by X-rays and Mossbauer studies
Trivedi BS, Jani NN, Joshi HH, Kulkarni RG |
