| 4237 - 4237 |
Chemical sensors for pollution monitoring and control
Akbar SA, Park CO |
| 4239 - 4245 |
Ceramic-based chemical sensors, probes and field-tests in automobile engines
Szabo N, Lee C, Trimboli J, Figueroa O, Ramamoorthy R, Midlam-Mohler S, Soliman A, Verweij H, Dutta P, Akbar S |
| 4247 - 4257 |
Review on zirconia air-fuel ratio sensors for automotive applications
Lee JH |
| 4259 - 4270 |
Doping and defect association in oxides for use in oxygen sensors
Fergus JW |
| 4271 - 4282 |
Oxygen sensors: Materials, methods, designs and applications
Ramamoorthy R, Dutta PK, Akbar SA |
| 4283 - 4288 |
NASICON devices attached with Li2CO3-BaCO3 auxiliary phase for CO2 sensing under ambient conditions
Obata K, Shimanoe K, Miura N, Yamazoe N |
| 4289 - 4292 |
Novel processing of NASICON and sodium carbonate/barium carbonate thin and thick films for a CO2 microsensor
Ward BJ, Liu CC, Hunter GW |
| 4293 - 4300 |
Solid-state sensors for in-line monitoring of NO2 in automobile exhaust emission
Kale GM, Wang L, Hayes JE, Congjin J, Hong YR |
| 4301 - 4305 |
Sensing properties of solid electrolyte SO2 sensor using metal-sulfide electrode
Souda N, Shimizu Y |
| 4307 - 4317 |
Development of a selective gas sensor utilizing a perm-selective zeolite membrane
Rauch WL, Liu M |
| 4319 - 4323 |
CO gas sensors operating at room temperature
Kang KS, Lee SP |
| 4325 - 4332 |
The influence of precursor powders and processing parameters on the properties of SnO2-based gas sensors
Ahmad A, Walsh J |
| 4333 - 4346 |
Tin dioxide gas sensor as a tool for atmospheric pollution monitoring: Problems and possibilities for improvements
Pijolat C, Riviere B, Kamionka M, Viricelle JP, Breuil P |
| 4347 - 4352 |
MoO3 and WO3 based thin film conductimetric sensors for automotive applications
Prasad AK, Gouma PI |
| 4353 - 4363 |
Amorphous ferroelectric thin film capacitive device for hydrogen detection
Tan OK, Chen XF, Zhu W |
| 4365 - 4371 |
On strain localization in the high rate extension of nylon fibers
Godfrey TA |
| 4373 - 4378 |
An ultrasonic technique for the determination of casting-chill contact during solidification
Kayikci R, Griffiths WD, Strangeways C |
| 4379 - 4383 |
Microstructural evolution and its effect on Hall-Petch relationship in friction stir welding of thixomolded Mg alloy AZ91D
Park SHC, Sato YS, Kokawa H |
| 4385 - 4391 |
Simulation of dendritic growth in the platform region of single crystal superalloy turbine blades
Wang W, Kermanpur A, Lee PD, Mclean M |
| 4393 - 4405 |
Multiscale modeling of particle-modified polyethylene
van Dommelen JAW, Brekelmans WAM, Baaijens FPT |
| 4407 - 4413 |
Hydrophobicity and physical properties of TEOS based silica aerogels using phenyltriethoxysilane as a synthesis component
Rao AV, Kalesh RR, Pajonk GM |
| 4415 - 4421 |
Quantitative Rietveld analysis of the amorphous content in cements and clinkers
Whitfield PS, Mitchell LD |
