| 5277 - 5289 |
Chemical, mechanical and microstructural characterization of low-oxygen containing silicon carbide fibers with ceramic coatings
Bansal NP, Chen YL |
| 5291 - 5300 |
Relationship between strength and failure mode of ceramic multilayers
Sorensen BF, Primdahl S |
| 5301 - 5309 |
Microstructure evolution and grain growth in the sintering of 3Y-TZP ceramics
Luo J, Adak S, Stevens R |
| 5311 - 5325 |
On the failure of unidirectional carbon-epoxy composites Part I: The effect of fibre sizing upon filament fracture and damage evolution
Marston C, Galiotis C |
| 5327 - 5338 |
Response surface study on production of explosively-welded aluminum-titanium laminates
Ege ES, Inal OT, Zimmerly CA |
| 5339 - 5349 |
Single crystal fibers of yttria-stabilized cubic zirconia with ternary oxide additions
Ritzert FJ, Yun HM, Miner RV |
| 5351 - 5357 |
Friction and plasticity effects in wedge splitting and cutting fracture tests
Williams JG |
| 5359 - 5363 |
Successful synthesis of Hg0.80Re0.20Sr2Can-1CunO2n+2+delta (n = 1, 2) by the sealed quartz tube technique
Calleja A, Sin A, Fabrega L, Garcia-Munoz JL, Pinol S, Fontcuberta J, Obradors X |
| 5365 - 5374 |
Fabrication of in situ TiC reinforced aluminum matrix composites Part I - Microstructural characterization
Tong XC |
| 5375 - 5382 |
Filament fracture within glass fibre strands in hybrid fibre cement composites
Kakemi M, Hannant DJ, Mulheron M |
| 5383 - 5396 |
Influence of poly(acrylic acid) molar mass on the fracture properties of glass polyalkenoate cements
Griffin S, Hill R |
| 5397 - 5400 |
Chalcogenide glasses for optical brazing
Song SM, Choi SY, Lee WS, Baik YJ |
| 5401 - 5403 |
Radial GRIN glasses in Li2O-Na2O-Al2O3-TiO2-SiO2 systems
Soodbiswas N, Sarkar SK, Basuray A |
| 5405 - 5414 |
The L1(2)<-> DO19 transformation in the intermetallic compound Fe3Ge
Chen QZ, Ngan AHW, Duggan BJ |
| 5415 - 5422 |
Failure modes of fibre reinforced composites: The effects of strain rate and fibre content
Okoli OI, Smith GF |
| 5423 - 5426 |
Characterization of the imidization process of Low K-fluorinated polymide film during thermal curing
Lee YK, Murarka SP |
| 5427 - 5432 |
Test methodology for the thermal shock characterization of ceramics
Vedula VR, Green DJ, Hellmann JR, Segall AE |
| 5433 - 5439 |
Calcium hydroxyapatites: evaluation of sorption properties for cadmium ions in aqueous solution
Mandjiny S, Matis KA, Fedoroff M, Jeanjean J, Rouchaud JC, Toulhoat N, Potocek V, Maireles-Torres P, Jones D |
| 5441 - 5444 |
On the phase composition of polymethylsiloxane derived ceramics
Wild MJ, Buhler P |
| 5445 - 5450 |
Fabrication and mechanical properties of glass fibre carbon fibre polypropylene functionally gradient materials
Jang J, Lee C |
| 5451 - 5453 |
Effect of water removal on the textural properties of resorcinol/formaldehyde gels by azeotropic distillation
Jabeen N, Mardan A |
| 5455 - 5462 |
A study of the mechanical properties of highly porous ceramics using acoustic emission
Aue J, De Hosson JTM |
| 5463 - 5472 |
The effect of substrate surface nature on texture formation in nickel oxide
Czerwinski F, Szpunar JA |
| 5473 - 5484 |
Toughening of epoxies through thermoplastic crack bridging
Cardwell BJ, Yee AF |
