| 3927 - 3938 |
Recent achievements on sulfide-type solid electrolytes: crystal structures and electrochemical performance
Ma Z, Xue HG, Guo SP |
| 3939 - 3958 |
A new insight into in vitro behaviour of poly(epsilon-caprolactone)/bioactive glass composites in biologically related fluids
Dziadek M, Zagrajczuk B, Menaszek E, Cholewa-Kowalska K |
| 3959 - 3971 |
Structural characteristics and biocompatibility of a casein-based nanocomposite for potential biomedical applications
Liu S, Yu H, Huang KB |
| 3972 - 3980 |
Nanostructural changes in bamboo cell walls with aging and their possible effects on mechanical properties
Okahisa Y, Kojiro K, Kiryu T, Oki T, Furuta Y, Hongo C |
| 3981 - 4000 |
High-temperature oxidation of yttrium silicides
Golden RA, Opila EJ |
| 4001 - 4009 |
Tailoring of surface plasmon resonances in TiN/(Al0.72Sc0.28)N multilayers by dielectric layer thickness variation
Garbrecht M, Hultman L, Fawey MH, Sands TD, Saha B |
| 4010 - 4021 |
Effects of VC additives on densification and elastic and mechanical properties of hot-pressed ZrB2-SiC composites
Guo SQ |
| 4022 - 4033 |
Physical and nanomechanical properties of the synthetic anhydrous crystalline CaCO3 polymorphs: vaterite, aragonite and calcite
Sevcik R, Sasek P, Viani A |
| 4034 - 4045 |
Preparation of lamellar-stacked TS-1 and its catalytic performance for the ammoximation of butanone with H2O2
Wang WT, Fu Y, Guo Y, Guo YL, Gong XQ, Lu GZ |
| 4046 - 4055 |
Naphthalene diimide self-assembled ribbons with high electrical conductivity and mobility without doping
Kumari N, Naqvi S, Kumar R |
| 4056 - 4066 |
Highly efficient fluorescence probe for copper (II) ions based on gold nanoclusters supported on wool keratin
Xing Y, Zhao D, Gu T, Liu HL, Yu WD |
| 4067 - 4077 |
Facile synthesis of three-dimensional lightweight nitrogen-doped graphene aerogel with excellent electromagnetic wave absorption properties
Zhou J, Chen YJ, Li H, Dugnani R, Du Q, UrRehman H, Kang HM, Liu HZ |
| 4078 - 4088 |
A facile synthesis of nanosheet-structured barium carbonate spheres with a superior adsorption capacity for Cr(VI) removal
Su YP, Cui MF, Zhu JH, Wu YY, Wei YP, Bian SC |
| 4089 - 4102 |
Effective size-controlled synthesis and electrochemical characterization of ordered Pt nanopattern arrays from self-assembling block copolymer template
Gan Y, Wang ZD, Shi Y, Guo CQ, Tan HY, Yan CF |
| 4103 - 4117 |
Fabrication and characterization of thermo-responsive GO nanosheets with controllable grafting of poly(hexadecyl acrylate) chains
Cao RR, Chen S, Liu HB, Liu HH, Zhang XX |
| 4118 - 4131 |
A novel biomimetic catalyst constructed by axial coordination of hemin with PAN fiber for efficient degradation of organic dyes
Han ZB, Li JF, Han X, Zhao XM, Ji XJ |
| 4132 - 4143 |
Wood-plastic composites based on HDPE and ionic liquid additives
Croitoru C, Varodi AM, Timar MC, Roata IC, Stanciu EM, Pascu A |
| 4144 - 4158 |
Influence of filler/matrix interactions on resin/hardener stoichiometry, molecular dynamics, and particle dispersion of silicon nitride/epoxy nanocomposites
Alhabill FN, Ayoob R, Andritsch T, Vaughan AS |
| 4159 - 4172 |
A novel route for the preparation of CoCr2O4/SiO2 nanocomposite starting from Co(II)-Cr(III) carboxylate complex combinations
Berei E, Stefanescu O, Muntean C, Vlase T, Taranu BO, Dabici A, Stefanescu M |
| 4173 - 4188 |
Prediction of Mode I interlaminar fracture toughness of stitched flax fiber composites
Ravandi M, Teo WS, Yong MS, Tay TE |
| 4189 - 4198 |
Facile fabrication of flexible layered GO/BNNS composite films with high thermal conductivity
Li PC, Shen H, Qian ZC, Yang XW, Zhao N, Zhu CZ, Xu J |
| 4199 - 4208 |
Study of enhancement in the dielectric and electrical properties of WO3-doped LiF nano-composite
Verma R, Tiwari SP, Kumari R, Srivastava R |
| 4209 - 4228 |
High-velocity impact deformation and perforation of fibre metal laminates
Kaboglu C, Mohagheghian I, Zhou J, Guan ZW, Cantwell W, John S, Blackman BRK, Kinloch AJ, Dear JP |
| 4229 - 4241 |
Experimental investigation on the effect of carbon nanotube additive on the field-induced viscoelastic properties of magnetorheological elastomer
Poojary UR, Hegde S, Gangadharan KV |
| 4242 - 4251 |
Computational study on thermal conductivity of defective carbon nanomaterials: carbon nanotubes versus graphene nanoribbons
Cui L, Zhang YD, Du XZ, Wei GS |
| 4252 - 4261 |
Ab initio Investigation of Adsorption Characteristics of Bisphosphonates on Hydroxyapatite (001) Surface
Ri MH, Jang YM, Ri US, Yu CJ, Kim KI, Kim SU |
| 4262 - 4273 |
Growth of atomically thin MoS2 flakes on high-kappa substrates by chemical vapor deposition
Zhao M, Zhang LJ, Liu MM, Dong YQ, Zou C, Hu Y, Yang KQ, Yang Y, Zeng H, Huang SM |
| 4274 - 4282 |
Low-voltage-driven Pt/BiFeO3/DyScO3/p-Si-based metal-ferroelectric-insulator-semiconductor device for non-volatile memory
Medwal R, Gupta S, Pavunny SP, Katiyar RK, Thomas R, Katiyar RS |
| 4283 - 4293 |
PbS (x) Se1-x thin films from the thermal decomposition of lead(II) dodecylxanthate and bis(N,N-diethyl-N'-naphthoylselenoureato)lead(II) precursors
Saah SA, McNaughter PD, Malik MA, Awudza JAM, Revaprasadu N, O'Brien P |
| 4294 - 4305 |
Theoretical study of phase stability, crystal and electronic structure of MeMgN2 (Me = Ti, Zr, Hf) compounds
Gharavi MA, Armiento R, Alling B, Eklund P |
| 4306 - 4315 |
Comparative study on dynamical stability against strain of pristine and chemically functionalized monolayer honeycomb materials
Zeng JP, Wu MS, Xu B, Tao SD, Li X, Ouyang CY |
| 4316 - 4322 |
Mechanically ductile 3D sp-sp (2) microporous carbon
Liu LY, Hu M, Pan YL, Xiong M, Liu C, Zhang Y, Luo K, Zhao ZS, Gao GY, Yu DL, He JL |
| 4323 - 4333 |
Co3O4 polyhedrons with enhanced electric conductivity as efficient water oxidation electrocatalysts in alkaline medium
Zhang SY, Li TT, Zhu HL, Zheng YQ |
| 4334 - 4359 |
Transition metal oxide nanostructures: premeditated fabrication and applications in electronic and photonic devices
Diao FY, Wang YQ |
| 4360 - 4370 |
The deposition of thin films of cadmium zinc sulfide Cd1-x Zn (x) S at 250 A degrees C from spin-coated xanthato complexes: a potential route to window layers for photovoltaic cells
Bakly AAK, Spencer BF, O'Brien P |
| 4371 - 4377 |
Photoresponse improvement in liquid-exfoliated SnSe nanosheets by reduced graphene oxide hybridization
Qiao H, Huang ZY, Ren XH, Yao H, Luo SW, Tang PH, Qi X, Zhong JX |
| 4378 - 4386 |
Enhanced stability of lead-free perovskite heterojunction for photovoltaic applications
Zhang J, Li SJ, Yang PF, Liu WG, Liao YL |
| 4387 - 4394 |
Distribution of microscopic defects in Al-doped CdZnTe crystal
Nan RH, Li T, Xu G, Jian ZY, Li XJ |
| 4395 - 4405 |
Facile synthesis of 3D binder-free N-doped carbon nanonet derived from silkworm cocoon for Li-O-2 battery
Jing SY, Zhang MS, Liang HG, Shen BL, Yin SB, Yang X |
| 4406 - 4416 |
Solvothermally synthesized Ti-rich LiMnTiO4 as cathode material for high Li storage
Kesavan T, Senthil C, Sasidharan M |
| 4417 - 4432 |
Nano-dynamic mechanical analysis (nano-DMA) of creep behavior of shales: Bakken case study
Liu KQ, Ostadhassan M, Bubach B, Dietrich R, Rasouli V |
| 4433 - 4443 |
LiMn0.7Fe0.3PO4 nanorods grown on graphene sheets synthesized in situ by modified microwave-assisted solvothermal method as high-performance cathode materials
Wu B, Gao WL |
| 4444 - 4455 |
Investigation of suitable binder combination and electrochemical charge transfer dynamics of vanadium carbide nanoparticles-based counter electrode in Pt-free dye-sensitized solar cell
Vijayakumar P, Govindaraj R, Santhosh N, Pandian M, Pandikumar A, Ramasamy P |
| 4456 - 4466 |
Novel nanosheets of ferrite nanoparticle arrays in carbon matrix from single source precursors: an anode material for lithium-ion batteries
Dou QQ, Wong KW, Li Y, Ng KM |
| 4467 - 4481 |
Nitrogen-doped carbon black supported NiCo2S4 catalyst for hydrogenation of nitrophenols under mild conditions
Xia JW, Zhang LL, Fu YS, He GY, Sun XQ, Wang X |
| 4482 - 4493 |
Mechanically robust and size-controlled MoS2/graphene hybrid aerogels as high-performance anodes for lithium-ion batteries
He PG, Zhao KR, Huang BY, Zhang BQ, Huang Q, Chen TF, Zhang QQ |
| 4494 - 4506 |
DFT plus U predictions: structural stability, electronic and optical properties, oxidation activity of BiOCl photocatalysts with 3d transition metals doping
Zhang XC, Wei JB, Li R, Zhang CM, Zhang H, Han PD, Fan CM |
| 4507 - 4514 |
Synergistic carbon-based hole transporting layers for efficient and stable perovskite solar cells
Zhang RJ, Chen Y, Xiong J, Liu XW |
| 4515 - 4526 |
Influence of cobalt on electrocatalytic water splitting in NiCoFe layered double hydroxides
Guzman-Vargas A, Vazquez-Samperio J, Oliver-Tolentino MA, Nava N, Castillo N, Macias-Hernandez MJ, Reguera E |
| 4527 - 4539 |
Preparation and one-step activation of nanoporous ultrafine carbon fibers derived from polyacrylonitrile/cellulose blend for used as supercapacitor electrode
Ma C, Chen JN, Fan QC, Guo JC, Liu WN, Cao EC, Shi JL, Song Y |
| 4540 - 4553 |
Impact of position and number of nitrogen atom substitution on the curvature and hydrogen adsorption properties of metallized borophene
Shahsavar A, Mohajeri A |
| 4554 - 4562 |
Localised detection of thiophenol with gold nanotriangles highly structured as honeycombs by nonlinear sum frequency generation spectroscopy
Barbillon G, Noblet T, Busson B, Tadjeddine A, Humbert C |
| 4563 - 4573 |
Continuous dynamic recrystallization (CDRX) model for aluminum alloys
Maizza G, Pero R, Richetta M, Montanari R |
| 4574 - 4581 |
Microstructure evolution and toughness degeneration of 9Cr martensitic steel after aging at 550 A degrees C for 20000 h
Wang W, Mao XD, Liu SJ, Xu G, Wang B |
| 4582 - 4597 |
Deformation and damage of sintered low-porosity aluminum under planar impact: microstructures and mechanisms
Yao Y, Chai HW, Li C, Bie BX, Xiao XH, Huang JY, Qi ML, Luo SN |
| 4598 - 4611 |
Atomic scale HAADF-STEM study of eta ' and eta(1) phases in peak-aged Al-Zn-Mg alloys
Bendo A, Matsuda K, Lee S, Nishimura K, Nunomura N, Toda H, Yamaguchi M, Tsuru T, Hirayama K, Shimizu K, Gao HY, Ebihara K, Itakura M, Yoshida T, Murakami S |
| 4612 - 4622 |
Heterogeneous nucleation of pure gold on highly smooth ceramic substrates and the influence of lattice misfit and cooling rate
Sheng C, Sun J, Wang DP, Zhang YH, Li LJ, Chen XR, Zhong HG, Zhai QJ |
| 4623 - 4634 |
An investigation on the microstructure, texture and mechanical properties of an optimized friction stir-welded ultrafine-grained Al-0.2 wt% Sc alloy deformed by accumulative roll bonding
Yousefieh M, Tamizifar M, Boutorabi SMA, Borhani E |
| 4635 - 4644 |
Synthesis and characterization of fully bio-based unsaturated polyester resins
Fidanovski BZ, Spasojevic PM, Panic VV, Seslija SI, Spasojevic JP, Popovic IG |
| 4645 - 4654 |
Investigation of the molecular dynamics of restricted water in wood by broadband dielectric measurements
Sudo S, Suzuki Y, Abe F, Hori Y, Nishi T, Kawaguchi T, Saito H, Yagihara S |
| 4655 - 4664 |
Electrospinning polypropylene with an amino acid as a strategy to bind the antimicrobial peptide Cys-LC-LL-37
Nogueira F, Teixeira P, Gouveia IC |
| 4665 - 4682 |
A comprehensive study on optimizing and thermoregulating properties of core-shell fibrous structures through coaxial electrospinning
Haghighat F, Ravandi SAH, Esfahany MN, Valipouri A |
| 4683 - 4692 |
Textile-inspired methodology toward asymmetric fabric based on weft-backed weave for oil/water separation
Gao Y, Wang J, Mou XF, Cai ZS |
| 4693 - 4704 |
Microscopic investigation of polyacrylonitrile fiber fibrils separated by ultrasonic etching
Kunzmann C, Schmidt-Bilkenroth G, Moosburger-Will J, Horn S |
