| 2537 - 2537 |
Professor Cyril A Hogarth
Carter CB, Rawlings RD |
| 2538 - 2542 |
Comments on the phenomena underlying pressure stimulated currents in dielectric rock materials
Anastasiadis C, Triantis D, Hogarth CA |
| 2543 - 2550 |
Structural and electrical properties of SiO2-Li2O-Nb2O5 glass and glass-ceramics obtained by thermoelectric treatments
Graca MPF, da Silva MGF, Valente MA |
| 2551 - 2556 |
Synthesis, crystallographic characterization and ionic conductivity of iron substituted sodium zirconium phosphate Na1.2Zr1.8Fe0.2(PO4)(3)
Shrivastava OP, Kumar N, Chourasia R |
| 2557 - 2564 |
Density gradients in aluminium foams: characterisation by computed tomography and measurements of the effective thermal conductivity
Solorzano E, Rodriguez-Perez MA, Reglero JA, de Saja JA |
| 2565 - 2573 |
Artificial neural network prediction of heat-treatment hardness and abrasive wear resistance of High-Vanadium High-Speed Steel (HVHSS)
Lu LJ, Xing JD, Wei SH, Peng T, Zhang YZ, Long R |
| 2574 - 2581 |
Correlation between interfacial microstructure and shear behavior of Sn-Ag-Cu solder ball joined with Sn-Zn-Bi paste
Shih PC, Lin KL |
| 2582 - 2585 |
High pressure Raman spectroscopic study of structural phase transition in samarium oxide
Hongo T, Kondo KI, Nakamura KG, Atou T |
| 2586 - 2590 |
Preparation, microstructure and electrorheological property of nano-sized TiO2 particle materials doped with metal oxides
Shang YL, Jia YL, Liao FH, Li JR, Li MX, Wang J, Zhang SH |
| 2591 - 2597 |
The study of tri-phasic interactions in nano-hydroxyapatite/konjac glucomannan/chitosan composite
Zhou G, Li YB, Zhang L, Li H, Wang MB, Cheng L, Wang YY, Wang HN, Shi PJ |
| 2598 - 2602 |
On the origin of blue-green luminescence in spray pyrolysed ZnO thin films
Kumar PMR, Vijayakumar KP, Kartha CS |
| 2603 - 2611 |
Characteristics of nanostructure and electrical properties of Ti thin films as a function of substrate temperature and film thickness
Savaloni H, Khojier K, Alaee MS |
| 2612 - 2617 |
Preparation and phase formation of perovskite Pb(Ni1/3Nb2/3)O-3 by a reaction-sintering process
Liou YC, Huang YC, Wu CT |
| 2618 - 2629 |
Positron lifetime studies and coincidence Doppler broadening spectroscopy of Al-6Mg-xSc (x=0 to 0.6 wt.%) alloy
Kaiser MS, Nambissan PMG, Banerjee MK, Sachdeva A, Pujari PK |
| 2630 - 2632 |
Serrated flow in cast ZE43 alloy
Wang CY, Zhang XN, Cao NZ, Liu Z |
| 2633 - 2636 |
Electromagnetic interfering shielding of aluminum alloy-cenospheres composite
Wu GH, Huang XL, Dou ZY, Chen S, Jiang LT |
| 2637 - 2642 |
Microstructure and electrical properties of ZnO-based varistors prepared by high-energy ball milling
Liu HY, Kong H, Ma XM, Shi WZ |
| 2643 - 2651 |
Chemical interaction between Crofer 22 APU and mica-based gaskets under simulated SOFC conditions
Wiener F, Bram M, Buchkremer HP, Sebold D |
| 2652 - 2661 |
Temperature and weldline effects on tensile properties of injection moulded short glass fibre PC/ABS polymer composite
Hashemi S, Lepessova Y |
| 2662 - 2668 |
Microstructural study of carbonized wood after cell wall sectioning
Ishimaru K, Hata T, Bronsveld P, Imamura Y |
| 2669 - 2674 |
Preparation of metal alloy powder by semi-solid processing
Li T, Lin X, Huang WD |
| 2675 - 2677 |
Effect of transition metal (TM) on the crystallization and the magnetic properties of Fe62Co10Si10B13Nb4TM1 melt-spun ribbons
Kim HY |
| 2678 - 2683 |
Effect of the oxygen pressure on the photoluminescence properties of ZnO thin films by PLD
Fan XM, Lian JS, Jiang Q, Zhou ZW |
| 2684 - 2689 |
Preparation and characterization of L-cystine and L-cysteine intercalated layered double hydroxides
Wei M, Guo J, Shi ZY, Yuan Q, Pu M, Rao GY, Duan X |
| 2690 - 2700 |
Investigations on the thermal and flexural properties of plain weave carbon/epoxy-nanoclay composites by hand-layup technique
Chowdhury FH, Hosur MV, Jeelani S |
| 2701 - 2705 |
Thermodynamically modeling the interactions of hydrogen, stress and anodic dissolution at crack-tip during near-neutral pH SCC in pipelines
Cheng YF |
| 2706 - 2711 |
Al2O3-platelet reinforced glass matrix composites from a mixture of wastes
Bernardo E, Castellan R, Hreglich S |
| 2712 - 2716 |
Study of defect states in a-Se85Te15-xPbx thin films by space charge limited conduction mechanism
Kushwaha VS, Kumar A |
| 2717 - 2723 |
Electrode coatings for high temperature hydrogen electrolysis
Windes WE, Smith C, Wendt D, Erickson A, Walraven J, Lessing PA |
| 2724 - 2734 |
Kinetics, mechanism and modelling of microstructural evolution during thermomechanical processing of a 15Cr-15Ni-2.2Mo-Ti modified austenitic stainless steel
Mandal S, Sivaprasad PV, Dube RK |
| 2735 - 2744 |
Effect of hot pressing time and temperature on the microstructure and mechanical properties of ZrB2-SiC
Rezaie A, Fahrenholtz WG, Hilmas GE |
| 2745 - 2752 |
Interfacial mechanical properties of TiN coating on steels by indentation
Chiou SY, Gan DS |
| 2753 - 2757 |
Fabrication and optical property of single-crystalline InSb nanowire arrays
Yang YW, Li L, Huang XH, Li GH, Zhang LD |
| 2758 - 2765 |
Preparation and characterization of metalorganic chemical vapor deposited nickel oxide and lithium nickel oxide thin films
Eleruja MA, Egharevba GO, Abulude OA, Akinwunmi OO, Jeynes C, Ajayi EOB |
| 2766 - 2774 |
Fracture behaviours of epoxy nanocomposites with nano-silica at low and elevated temperatures
Deng SQ, Ye L, Friedrich K |
| 2775 - 2781 |
Preparation and characterization of hydrophobically modified polyacrylamide hydrogels by grafting glycidyl methacrylate
Song P, Zhang YF, Kuang JZ |
| 2782 - 2791 |
The role of poly(ethylene terephthalate-co-isophthalate) as interfacial agent in polypropylene-matrix composites
Arencon D, Velasco JI, Ardanuy M, Martinez AB |
| 2792 - 2795 |
Synthesis and optical properties of naturally occurring fluorescent mineral, ferroan sphalerite, inspired (Fe,Zn)S nanoparticles
Boyle TJ, Pratt HD, Hernandez-Sanchez BA, Lambert TN, Headley TJ |
| 2796 - 2801 |
Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites
Mandal D, Dutta BK, Panigrahi SC |
| 2802 - 2806 |
Compressive strength of ice at impact strain rates
Kim H, Keune JN |
| 2807 - 2819 |
Compressive creep behavior in air of a slightly porous as-sintered polycrystalline alpha-alumina material
Bernard-Granger G, Guizard C, Duclos R |
| 2820 - 2829 |
Fracture behavior of notched specimens of TiAl alloys
Chen JH, Cao R, Zhang J, Wang GZ |
| 2830 - 2836 |
Kinetics of the gamma ->alpha-alumina phase transformation by quantitative X-ray diffraction
Macedo MIF, Bertran CA, Osawa CC |
| 2837 - 2843 |
Silylation of layered zirconium hydroxy phosphate and its porous properties
Takei T, Yonesaki Y, Kumada N, Kinomura N |
| 2844 - 2848 |
Ball milling of stainless steel scrap chips to produce nanocrystalline powder
Enayati MH, Bafandeh MR, Nosohian S |
| 2849 - 2853 |
Effects of nanocrystalline ferrite particles on densification and magnetic properties of the NiCuZn ferrites
Su H, Zhang HW, Tang XL, Liu YL |
| 2854 - 2861 |
Fabrication of cellular and microcellular ceramics with controllable open-cell content from polysiloxane-LDPE blends: I. Compounding and foaming
Wang CM, Wang J, Park CB, Kim YW |
| 2862 - 2866 |
Analysis of observations on solid-solution hardening in KBr-KCl single crystals
Asif A, Butt MZ |
| 2867 - 2878 |
On the hydrolytic stability of polyester yarns
Burgoyne CJ, Merii AL |
| 2879 - 2885 |
Short-term corrosion behavior of galvanized coatings in natural waters of the Greek territory
Pistofidis N, Vourlias G, Stergioudis G |
| 2886 - 2890 |
Synthesis of CaTiO3 : Pr, Al phosphors by sol-gel method and their luminescence properties
Yin SY, Chen DH, Tang WJ, Yuan YH |
| 2891 - 2893 |
Accelerated aging study of ultra high molecular weight polyethylene yarn and unidirectional composites for ballistic applications
Chabba S, van Es M, van Klinken EJ, Jongedijk MJ, Vanek D, Gijsman P, van der Waals ACLM |
| 2894 - 2898 |
Nanomechanical properties of the stigma of dragonfly Anax parthenope julius Brauer
Tong J, Zhao YR, Sun JY, Chen DH |
| 2899 - 2902 |
On the intergranular embrittlement of a solid-solution strengthened Fe-base alloy by internal oxidation
Tawancy HM |
| 2903 - 2906 |
Conductive behavior of composites composed of carbon black-filled ethylene-tetrafluoroethylene copolymer
Liu ZH, Song YH, Shangguan YG, Zheng Q |
| 2907 - 2912 |
A method for calculating order parameter and determining orientation direction on polarized molecules in organic-inorganic hybrid film
Yamashita M, Kuraoka K |
| 2913 - 2913 |
High mobility organic transistor patterned by the shadow-mask with all structure on a plastic substrate (vol 42, pg 1026, 2007)
Lee JW, Ju BK, Jang J, Yoon YS, Kim JK |
