| 1977 - 1978 |
Guest Editors' Editorial: HTC-2009
Eustathopoulos N, Kaptay G, Nikolopoulos P, Passerone A |
| 1979 - 1985 |
Interfacial properties of immiscible Co-Cu alloys
Egry I, Ratke L, Kolbe M, Chatain D, Curiotto S, Battezzati L, Johnson E, Pryds N |
| 1986 - 1992 |
Oxygen partial pressure dependence of surface tension and its temperature coefficient for metallic melts: a discussion from the viewpoint of solubility and adsorption of oxygen
Hibiya T, Morohoshi K, Ozawa S |
| 1993 - 2001 |
Surface tension of gamma-TiAl-based alloys
Nowak R, Lanata T, Sobczak N, Ricci E, Giuranno D, Novakovic R, Holland-Moritz D, Egry I |
| 2002 - 2008 |
Surface tension and density measurement of liquid Si-Cu binary alloys
Adachi M, Schick M, Brillo J, Egry I, Watanabe M |
| 2009 - 2014 |
Effect of metal purity and testing procedure on surface tension measurements of liquid tin
Fima P, Nowak R, Sobczak N |
| 2015 - 2022 |
Surface and grain-boundary energies as well as surface mass transport in polycrystalline yttrium oxide
Triantafyllou G, Angelopoulos GN, Nikolopoulos P |
| 2023 - 2029 |
A study on the interfacial tension between solid iron and CaO-SiO2-MO system
Jung EJ, Kim W, Il S, Min DJ |
| 2030 - 2034 |
Liquid-liquid phase equilibria, density difference, and interfacial tension in the Al-Bi-Si monotectic system
Kaban I, Grobner J, Hoyer W, Schmid-Fetzer R |
| 2035 - 2041 |
Metastable microheterogeneity of melts in the Ga-Bi system with limited solubility of components in liquid state
Yagodin D, Popel P, Filippov V |
| 2042 - 2050 |
Interaction between liquid aluminum and yttria substrate: microstructure characterization and thermodynamic considerations
Wojewoda-Budka J, Sobczak N, Onderka B, Morgiel J, Nowak R |
| 2051 - 2056 |
Experimental study of density, surface tension, and contact angle of Sn-Sb-based alloys for high temperature soldering
Plevachuk Y, Hoyer W, Kaban I, Kohler M, Novakovic R |
| 2057 - 2061 |
Wetting of grain boundaries in Al by the solid Al3Mg2 phase
Straumal BB, Baretzky B, Kogtenkova OA, Straumal AB, Sidorenko AS |
| 2062 - 2070 |
The effect of carbon nanolayers on wetting of alumina by NiSi alloys
Koltsov A, Crisci A, Hodaj F, Eustathopoulos N |
| 2071 - 2079 |
Wetting and interactions of Ni- and Co-based superalloys with different ceramic materials
Valenza F, Muolo ML, Passerone A |
| 2080 - 2084 |
Wettability of Ti3SiC2 by Ag-Cu and Ag-Cu-Ti melts
Dezellus O, Voytovych R, Li APH, Constantin G, Bosselet F, Viala JC |
| 2085 - 2089 |
The effect of thermodynamic properties of Me-Ti (Me = In, Sn, Ga, Au, and Ge) melts on the wetting of the CaF2 substrate
Barzilai S, Lomberg M, Aizenshtein M, Froumin N, Frage N |
| 2090 - 2098 |
Wettability of SiC and alumina particles by liquid Bi under liquid Al
Budai I, Kaptay G |
| 2099 - 2105 |
Non-reactive versus dissolutive wetting of Ag-Cu alloys on Cu substrates
Kozlova O, Voytovych R, Protsenko P, Eustathopoulos N |
| 2106 - 2111 |
A novel approach to determine high temperature wettability and interfacial reactions in liquid metal/solid interface
Frenznick S, Swaminathan S, Stratmann M, Rohwerder M |
| 2112 - 2117 |
Improvement of the wettability of SiMn IF-HSS by liquid zinc by controlling the dew point of the annealing gas atmosphere
Lee J, Park J, Kim Y, Jeon SH |
| 2118 - 2125 |
Wetting and laser brazing of Zn-coated steel products by Cu-Si filler metal
Koltsov A, Bailly N, Cretteur L |
| 2126 - 2132 |
Wetting and interfacial interactions in the CaO-Al2O3-SiO2/silicon carbide system
Mailliart O, Chaumat V, Hodaj F |
| 2133 - 2139 |
The effect of an interfacial tantalum oxide layer on interactions in the Ta/Sn system
Gelbstein M, Froumine N, Frage N |
| 2140 - 2143 |
Effect of oxygen on the molten BGO/Ir wetting and sticking
Duffar T, Bochu O, Dusserre P |
| 2144 - 2149 |
Surface tension of liquid Cu and anisotropy of its wetting of sapphire
Schmitz J, Brillo J, Egry I |
| 2150 - 2156 |
Wetting dynamics versus interfacial reactivity of AlSi alloys on carbon
Calderon NR, Voytovych R, Narciso J, Eustathopoulos N |
| 2157 - 2164 |
Observed behavior of various oxide inclusions in front of a solidifying low-carbon steel shell
Malmberg KJ, Shibata H, Kitamura SY, Jonsson PG, Nabeshima S, Kishimoto Y |
| 2165 - 2173 |
Solidification behaviour of ceramic particle reinforced Al-alloy matrices
Karantzalis AE, Lekatou A, Georgatis E, Mavros H |
| 2174 - 2180 |
The optimum contact angle range for metal foam stabilization: an experimental comparison with the theory
Klinter AJ, Leon CA, Drew RAL |
| 2181 - 2187 |
Direct bonding of Cu to oxidized silicon nitride by wetting of molten Cu and Cu(O)
Tanaka SI |
| 2188 - 2193 |
Interfacial microstructure of Si3N4/Si3N4 joint brazed using Au-Ni-V filler alloy
Zhang J, Sun Y, Liu CF, Zhang HW |
| 2194 - 2202 |
Effect of Nb plus Ti coating on the wetting behavior, interfacial microstructure, and mechanical properties of Al/Al2O3 joints
Ksiazek M, Mikulowski B, Richert M |
| 2203 - 2209 |
Influence of processing route on electrical and thermal conductivity of Al/SiC composites with bimodal particle distribution
Weber L, Sinicco G, Molina JM |
| 2210 - 2217 |
Capillary interactions between molten silicon and porous graphite
Israel R, Voytovych R, Protsenko P, Drevet B, Camel D, Eustathopoulos N |
| 2218 - 2222 |
Silicon purity controlled under electromagnetic levitation (SPYCE): influences on undercooling
Beaudhuin M, Zaidat K, Duffar T, Lemiti M |
| 2223 - 2227 |
Influence of heat distribution and zone shape in the floating zone growth of selected oxide compounds
Behr G, Loser W, Wizent N, Ribeiro P, Apostu MO, Souptel D |
| 2228 - 2232 |
Convectional controlled crystal-melt interface using two-phase radio-frequency electromagnetic heating
Hermann R, Gerbeth G, Priede J, Krauze A, Behr G, Buchner B |
| 2233 - 2238 |
An experimental study on the influence of particles on grain boundary migration
Janis J, Nakajima K, Karasev A, Shibata H, Jonsson PG |
| 2239 - 2245 |
Parametric study for dewetted Bridgman method: crystal-crucible gap dependence on the Bond and Laplace numbers and on contact angle
Epure S, Duffar T, Braescu L |
