| 2183 - 2193 |
Modeling Studies Applied to Functionally Graded Materials
Markworth AJ, Ramesh KS, Parks WP |
| 2194 - 2200 |
Phase-Transformation and Microstructural Changes of Si3N4 During Sintering
Goto Y, Thomas G |
| 2201 - 2214 |
Morphology of Melt Crystallized Polypropylene in the Presence of Polyimide Fibers
Sukhanova TE, Lednicky F, Urban J, Baklagina YG, Mikhailov GM, Kudryavtsev VV |
| 2215 - 2219 |
Ohm Resistivity of Electroless Copper Layers as a Function of Their Thicknesses
Radoeva M, Radoev B |
| 2220 - 2226 |
A Study of Nanocrystalline Iron and Aluminum Metals and Fe3Al Intermetallic by Mechanical Alloying
Bonetti E, Scipione G, Valdre G, Enzo S, Frattini R, Macri PP |
| 2227 - 2234 |
Study of Lanthanum-Deficient Compositions in the Systems La-Cu-O and La-Sr-Cu-O
Alconchel SA, Ulla MA, Lombardo EA |
| 2235 - 2247 |
Microfracture and Material Removal in Scratching of Alumina
Xu HH, Jahanmir S |
| 2248 - 2250 |
A Study of the Immobilization of Strontium over Crystalline Titania
Bhattacharyya DK, Dutta NC |
| 2251 - 2253 |
Nondestructive Examination of Paint Coatings Using the Thermal-Wave Interferometry Technique
Moksin MM, Almond DP |
| 2254 - 2256 |
Temperature-Dependence of Hydrogenated Amorphous-Silicon Thin-Film Transistors
Chen BY, Wu WH, Chen JR, Hong CS |
| 2257 - 2262 |
Use of Rice-Bran Oil in the Compounding of Styrene-Butadiene Rubber
Kuriakose AP, Rajendran G |
| 2263 - 2268 |
Aging Behavior and Toughness of Silicon-Carbide Particulate-Reinforced Al-Li-Cu-Mg-Zr Metal-Matrix Composites
Shakesheff AJ |
| 2269 - 2276 |
Aging and Toughness of Silicon-Carbide Particulate-Reinforced Al-Cu and Al-Cu-Mg Based Metal-Matrix Composites
Shakesheff AJ |
| 2277 - 2283 |
Grain-Size Effects on the Mechanical-Properties of Some Squeeze Cast Light Alloys
Yue TM, Ha HU, Musson NJ |
| 2284 - 2290 |
Ion Storage Properties of CeO2 and Mixed CeO2/SnO2 Coatings
Orel ZC, Orel B |
| 2291 - 2295 |
Microscope Studies of the Morphology and Structure of Carbon Nanotubes
Xie SS, Li N, Zhang ZB, Liu W, Wang G, Qian SF, Fu CS |
| 2296 - 2298 |
Ab-Initio Self-Consistent Theory of Ionic-Diffusion in Superionic Conductors with an Internal Interface
Nachev I, Balkanski M |
| 2299 - 2304 |
Observations of Damage Morphologies in Nacre During Deformation and Fracture
Wang RZ, Wen HB, Cui FZ, Zhang HB, Li HD |
| 2305 - 2312 |
Subcritical Interlaminar Crack-Growth in Fiber Composites Exhibiting a Rising R-Curve
Okada A, Dyson IN, Kinloch AJ |
| 2313 - 2318 |
Si-29 Nuclear-Magnetic-Resonance Study of the Structure of Silicon Oxycarbide Glasses Derived from Organosilicon Precursors
Corriu RJ, Leclercq D, Mutin PH, Vioux A |
| 2319 - 2324 |
The Drying of Clay-Minerals and Mixed Clay-Minerals
Blanchart P, Gaillard JM, Weber F |
| 2325 - 2329 |
Reactive Deposition of Tungsten and Titanium Carbides by Induction Plasma
Jiang XL, Gitzhofer F, Boulos MI, Tiwari R |
| 2330 - 2337 |
Correlation of Geometry-Effects with Fracture-Toughness by Damage Equivalence
Ma FS |
| 2338 - 2340 |
Combination of the Quartz-Crystal Microbalance and the Electrochemical Technique for the Characterization of Self-Assembled Monolayers of Octadecylmercaptan on Gold Surfaces
Kunitake M, Narikiyo Y, Manabe O, Nakashima N |
| 2341 - 2347 |
Crystallization of Sol-Gel Derived Glass-Ceramic Powders in the CaO-MgO-Al2O3Sio2 System .2. Cordierite
Sales M, Alarcon J |
| 2348 - 2351 |
Crystal-Growth of Bi-Sr-Ca-Cu-O from Sr-Ca-Cu-O Thin-Films
Kaigawa R, Sakaguchi T, Herrmann R, Kaito C, Miki H, Nakayama Y |
| 2352 - 2357 |
Mechanical and Physical-Properties of Post-Creep, Pitch-Based Carbon Filaments
Lavin JG, Kogure K, Sines G |
| 2358 - 2363 |
Control of Morphology of Zn2Sio4 by Hydrothermal Preparation
Li QH, Komarneni S, Roy R |
| 2364 - 2376 |
Influence of Morphology and Surface Preparation on the Weatherability of Polypropylene
Ogier L, Rabello MS, White JR |
| 2377 - 2381 |
Effect of Composition, Film Thickness and Annealing on the Optical-Properties of Bi-Sb-Se Thin-Films
Fadel M, Elsamanoudy MM, Sharaf KA |
| 2382 - 2389 |
Effect of Particle-Size Distribution on Sintering .2. Sintering of Alumina
Ting JM, Lin RY |
| 2390 - 2400 |
Microstructural Modeling of Grain-Boundary Stresses in Alloy-600
Kozaczek KJ, Petrovic BG, Ruud CO, Kurtz SK, Mcilree AR |
| 2401 - 2405 |
Optimization of Interfacial Bonding to Enhance Fracture-Toughness of Ceramic-Matrix Reinforced with Metallic Ribbon
Lee TK, Subramanian KN |
| 2406 - 2411 |
Fracture and Flexural Characterization of Sicw/SiC Composites at Room and Elevated-Temperatures
Mahfuz H, Zadoo DP, Wilks F, Maniruzzaman MD, Jeelani S |
| 2412 - 2419 |
A DC Plasma-Fluidized Bed Reactor for the Production of Calcium Carbide
Zhu CW, Zhao GY, Hlavacek V |
| 2420 - 2424 |
Physical Characterization of E-Glass Fibers Treated with Alkylphenylpoly (Oxyethylene) Alcohol Fibers Conditioned in Solutions of Different pH
Fagerholm HM, Lindsjo C, Rosenholm JB |
| 2425 - 2429 |
Size Distribution of CdS Nanocrystal-Doped Silica Xerogels
Othmani A, Plenet JC, Bernstein E, Paille F, Bovier C, Dumas J, Mai C |
| 2430 - 2437 |
Effect of Sliding Speed on Friction and Wear of Unidirectional Aramid Fiber-Phenolic Resin Composite
Sinha SK, Biswas SK |
| 2438 - 2445 |
Failure Mechanics in Ternary Composites of Polypropylene with Inorganic Fillers and Elastomer Inclusions .2. Fracture-Toughness
Jancar J, Dibenedetto AT |
| 2446 - 2454 |
The Effect of Annealing Temperature on the Fracture Performance of Isotactic Polypropylene
Frontini PM, Fave A |
| 2455 - 2462 |
Influence of Spherical Indentor Radius on the Indentation-Induced Transformation Behavior of Silicon
Weppelmann ER, Field JS, Swain MV |
