| 1431 - 1433 |
Improvement of mechanical properties of Y-TZP by the addition of B2O3-Al2O3-SiO2
Nakayama S, Sakamoto M |
| 1435 - 1437 |
Preparation of water-repellent platy-alumina particles
Hotta Y, Ono A, Sano S, Oda K |
| 1439 - 1442 |
New amorphous alloys in Al-Si-Fe-TM (TM = Cr, Mn, V) systems and their crystallization behavior
Louzguine DV, Takeuchi A, Inoue A |
| 1443 - 1444 |
Third-order optical susceptibility of Pd particles determined by degenerate four-wave mixing
Yamamura S, Sakaguchi T, Tatsu Y, Miya M, Adachi M, Fukumi T, Nagata A |
| 1445 - 1447 |
Phase transformation kinetics in Pb0.91La0.09Zr0.65Ti0.35O3 films
Tunaboylu B, McKittrick J, Esener SC |
| 1449 - 1451 |
Polydiacetylenes having quinolyl sidegroups for third-order nonlinear optical materials
Sarkar A, Okada S, Nakanishi H, Matsuda H |
| 1453 - 1455 |
Y-TZP/Ce-TZP functionally graded composite
Zhao C, Vleugels J, Vandeperre L, Basu B, Van der Biest O |
| 1457 - 1460 |
Leakage current mechanism of (Ba,Sr)TiO3 film with various (Ba+Sr)/Ti ratio on a RuO2 electrode
Paek SH, Won J, Lee KS, Seong JY, Oh SH, Jeon MS, Choi DK, Mah JP, Park CS |
| 1461 - 1462 |
Mechanical hardness: atomic-level calculations for diamond-like materials
Clerc DG |
| 1463 - 1465 |
Seebeck coefficient and electrical resistivity in Re6Te15-xSex at room temperature
Kilibarda-Dalafave S, Ziegler J |
| 1467 - 1470 |
In-situ surface texturing of conductive polymer composite substrates for field-emission applications
Burden AP, Forrest RD, Ravi S, Silva P |
| 1471 - 1473 |
Improvement of the unified theory of thermal shock resistance in brittle material
Mizutani T, Sando M |
| 1475 - 1477 |
Effect of machining and post-sintering heat treatment of sol-gel-derived zirconia-toughened alumina on its mechanical properties
Jayaseelan D, Gnanam FD, Nishikawa T, Awaji H |
| 1479 - 1481 |
Biomimetic growth of calcium phosphates with an organized hydroxylated surface as template
Mao CB, Li HD, Cui FZ, Feng QL, Wang H, Ma CL |
| 1483 - 1486 |
The role of sulfur during Mo etching using SF6 and Cl-2 gas chemistries
Baek KH, Yun SJ, Park JM, Yoon YS, Nam KS, Kwon KH, Kim CI |
| 1487 - 1490 |
On the thermoelectric performance of plasma spray-formed iron disilicide
Schilz J, Muller E, Schackenberg K, Ernst H, Kaysser WA, Langer G, Lugscheider E |
| 1491 - 1493 |
Metallo-organic chemical vapor deposition application of metalloorganic calix[4]arene-base barium precursor
Burtman V |
| 1495 - 1497 |
Effects of the La2O3 particles addition on grain boundary character distribution of pure W
Saito N, Mabuchi M, Nakamura M, Asahina T, Okamoto K, Igarashi T |
| 1499 - 1502 |
Cellular spacing selection of Al-Zn alloy under rapid unidirectional solidification
Feng J, Huang WD, Lin X, Pan QY, Li T, Zhou YH |
| 1503 - 1506 |
Solid particle erosion of AISI 403 stainless steel
Kim JJ, Park SK |
| 1507 - 1509 |
Metal-oxide-semiconductor characteristics of tantalum oxide thin films grown by 172 nm radiation
Zhang JY, Boyd IW |
| 1511 - 1514 |
A study of the phase boundaries and lattice parameters of the CdS-CdTe pseudobinary system
Wood DA, Rogers KD, Lane DW, Conibeer GJ, Parton D |
