| 469 - 471 |
Properties of Al2O3-15 Vol-Percent ZrO2 Ceramics Prepared by Precipitation
Lee HL, Hong GG |
| 472 - 473 |
Zirconia-TZM Brazed Joints
Dixon DC |
| 474 - 476 |
Correlation Between Friction Coefficient and Wear Mechanism of SiC/SiC System
Takadoum J, Zsiga Z, Benrhouma M, Roquescarmes C |
| 477 - 479 |
Application of Secondary Ettringite Formation in Steam-Cured Expansive Cement to Friction Pile Technology
Fu Y, Gu P, Xie P, Beaudoin JJ |
| 480 - 482 |
Ranking Machinability of 9 Machinable Ceramics by Dental High-Speed Cutting Tests
Taira M, Yamaki M |
| 483 - 486 |
Reaction Synthesis of Ni-36.8 at-Percent Al
Alman DE |
| 487 - 490 |
Electrochemical Al2O3 Coatings on TiB2 and TiC Substrates
Chaim R, Stark G, Galor L, Bestgen H |
| 491 - 493 |
Sintering of Thin Sheets of Alumina Prepared by the Sol-Spray Technique
Varma HK, Mani TV, Warrier KG, Damodaran AD, Balachandran U |
| 494 - 495 |
Preparation of Porous-Glass Hollow-Fiber from Glass Based on SiO2-B2O3-Ro-ZrO2 (R=ca, Zn) System
Yazawa T, Tanaka H, Eguchi K |
| 496 - 499 |
Influence of Hydrogen and Long-Range Order on the Tensile and Fatigue Characteristics of Pd3Mn
Shenk J, Moss A, Jonsen D, Nesbit S, Rebeiz K, Craft A |
| 500 - 502 |
Microstructures of Magnetoresistive Ag-Co Alloy Thin-Films Prepared by Cosputtering
Kitada M |
| 503 - 504 |
The Effect of H2O2 on Nickel Electrodeposits
Karayianni C, Amandi N, Vassiliou P |
| 505 - 507 |
Low-Temperature Synthesis of Magnesium Chromite Spinel via Suspension of Mg-5(CO3)(4)(Oh)(2)Center-Dot-4H(2)O in Aqueous Cr(III) Solution
Zaki MI, Mansour SA |
| 508 - 511 |
Some Problems of the Corrosion and Protection of Materials in Liquid-Metal MHD Generators
Branover H, Lesin S, Tsirlin M |
| 512 - 513 |
Photoconductivity of Solid-State-Reacted SnSe Thin-Films
Siddiqui SS, Desai CF |
| 514 - 515 |
Elastic Properties of Monoclinic and Orthorhombic ZrO2
Kawasaki S, Yamanaka T |
| 516 - 518 |
Preparation of Carbide Fibers by Thermal-Decomposition of Cellulose-Metal (Ti, Zr) Alkoxide Gel Fibers
Kurokawa Y, Ota H, Sato T |
| 519 - 520 |
Transformation of Gamma-Alooh (Boehmite) and Al(Oh)(3) (Gibbsite) to Alpha-Al2O3 (Corundum) Induced by High-Energy Ball-Milling
Tonejc A, Stubicar M, Tonejc AM, Kosanovic K, Subotic B, Smit I |
| 521 - 524 |
Microstructural Evolution of Alpha(Fe,Si) in Fe82Si6B12 Metallic-Glass Film
Jiang HG, Tong HY, Ding BZ, Hu ZQ, Song QH |
| 525 - 527 |
Aging of Vapor-Grown Selenium Films on Substrates
Bhadra SK, Maiti AK, Bhar R, Talapatra D, Goswami K |
| 528 - 529 |
Phosphate Luminophores Doped with Manganese and Lutetium
Dafinova RM |
| 530 - 532 |
Reactive Hot-Pressing Study of the Al2O3-AlN-MgO System
Roy JF, Goeuriot P, Thevenot F |
| 533 - 534 |
Hydrothermal Preparation of Na1.0Ti2(PO4)(3) Fine Powders
Futagami RS, Ioku K, Nishizawa H, Yamasaki N |
| 535 - 537 |
Surface Characterization of the Polypropylene Matrix Used in Composites
Bautista MC, Rubio J, Oteo JL |
| 538 - 540 |
Studies of Mixed Hydroxide Hydrogel in the Ternary-System ZrO2-Al2O3-SiO2 .1. Kinetics of Thermal Dehydration of the Synthetic Hydrogel
Mitra NK, Maitra S, Roy K |
| 541 - 544 |
Structure and Properties of Metal-Matrix Composite
Karni N, Barkay GB, Bamberger M |
