693 - 695 |
A Thermodynamic Analysis of Ceramic Oxide Liquid-Metal Interlaces Sotiropoulou D |
696 - 698 |
Lithium Salt-Based Additives for Early Strength-Enhancement of Ordinary Portland-Cement High-Alumina Cement Paste Gu P, Beaudoin JJ |
699 - 701 |
Thermal Cycling of Iron-Containing and Magnesium-Containing Aluminum Titanate in a Dilatometer Perera DS, Cassidy DJ |
702 - 704 |
Effect of Contact Area on Synthesis of Silicon-Carbide Through Carbothermal Reduction of Silicon Dioxide Chen SH, Lin CI |
705 - 707 |
Studies of the Pyrolysis Behavior of Silica Sol Copolymerized with Furfuryl Alcohol Manocha SM, Vashistha DY, Manocha LM |
708 - 711 |
Measurements of the Dynamic Young Modulus and Damping of a Chemical-Vapor Infiltrated SiC/SiC Composite Wolfenden A, Kinzy JE, Singh M |
712 - 714 |
The Microstructure of the Surface (Topography) of a Spherulitically Solidified Foil of Polypropylene Schulze GE, Wicht P |
715 - 718 |
High-Temperature Tensile Properties and Fracture Characteristics in a Monolithic Gamma-TiAl Alloy and a TiB2 Particle-Reinforced TiAl Alloy Mirshams RA, Li ZX, Mohamadian HP |
719 - 721 |
Microstructure of Al2O3-ZrO2 Nanocomposites Prepared by Combustion Process Kim WJ, Park JY, Oh SJ, Kim YS, Kuk IH |
722 - 725 |
Ceramic Thin-Film Thickness Determination by Nano-Indentation Marie S, Nadal M, Ducarroir M, Felder E |
726 - 728 |
Extrudability of Pm 2124/Sicp Aluminum-Matrix Composite Lieblich M, Gonzalezdoncel G, Adeva P, Ibanez J, Torralba M, Caruana G |
729 - 731 |
Hydrogen Embrittlement Fracture of Notched Amorphous Ni-Alloy Specimens Zuo Y, Huang WD |
732 - 734 |
Influence of the Ring-Ring Interaction in Se-8-Ring Clusters on Their Absorption Lin ZJ, Wang ZG, Chen W, Lin LY, Li GH, Liu ZX, Han HX, Wang ZP |
735 - 736 |
Crystal Morphology of Calcium Aluminates Hydrated for 14 Days Das SK, Kumar S, Das SK, Daspoddar PK |
737 - 740 |
Phosphate and Cell-Growth on Nanostructured Semiconductors Bayliss SC, Harris PJ, Buckberry LD, Rousseau C |
741 - 742 |
Dependence of Vickers Microhardness on Applied Load in Indium Cai X, Yang XY, Zhou PN |
743 - 744 |
Mossbauer Study of Amorphous Al2O3-Eu3+ Li J, Shi Y, Gong J, Chen G |
745 - 746 |
Metallization of Si3N4 Surface by Molten-Salt Reaction Chen J, Wei P, Wang WM, Huang QL, Huang Y |
747 - 751 |
Formation of Alpha-Sialons with Dual Modifying Cations (Li+y and Ca+y) Huang ZK, Jiang YZ, Tien TY |
752 - 754 |
Use of a Calcined Ni(II), Al(III) Layered Double Hydroxide for the Reduction of Nitric-Oxide in the Presence of Methane and Oxygen Mulukutla RS, Detellier C |
755 - 758 |
Mechanical-Properties of Trans-Polyoctenylene Grown Epitaxially on Oriented Polypropylene Films Gehrmann R, Wenig W |
759 - 760 |
Phase-Stability of the Al-N System Siangchung L |
761 - 762 |
Thermal-Degradation of Butyl Rubber Zaharescu T, Podina C |
763 - 765 |
Synthesis and Superconducting Properties of the Composite in the System (1-X).YBa2Cu3Oy-X.Ba(Y1/2Nb1/2)O-3 Vlakhov E, Dimitriev Y, Gattef E, Staneva A, Aleksandrova S, Nenkov K |
766 - 768 |
Effect of Molding Pressure on Sink-Mark Defects of Injection-Molded Ceramics Tseng WJ |
769 - 771 |
Quantitative Phase-Analysis of Inconel-718 by X-Ray-Diffraction Liu WC, Xiao FR, Yao M, Chen ZL, Wang SG, Li WH |
772 - 775 |
Thermal-Shock Behavior of Al2O3-SiC Composites Made by Directed Melt Oxidation of Al-Alloy Kim IS, Kim IG |
776 - 779 |
Influence of Acetic and Formic Vapors on Patinated Artistic Bronze Lopezdelgado A, Bastidas JM, Alonso MP, Lopez FA |
780 - 783 |
Effects of Microstructure and Thickness on the Creep-Behavior of a Superalloy Baldan A |