| 1 - 9 |
Effect of particle size and concentration on the synergistic UF membrane fouling by particles and NOM fractions
Tian JY, Ernst M, Cui FY, Jekel M |
| 10 - 18 |
A solvent-shrinkage method for producing polymeric microsieves with sub-micron size pores
Vriezekolk EJ, Kemperman AJB, Girones M, de Vos WM, Nijmeijer K |
| 19 - 25 |
Influence of sol-gel process parameters on the micro-structure and performance of hybrid silica membranes
Qureshi HF, Nijmeijer A, Winnubst L |
| 26 - 33 |
Performance of anaerobic membrane bioreactor for sewage sludge treatment: Mesophilic and thermophilic processes
Meabe E, Deleris S, Soroa S, Sancho L |
| 34 - 41 |
Flexible hybrid membrane treatment systems for tailored nutrient management: A new paradigm in urban wastewater treatment
Vuono D, Henkel J, Benecke J, Cath TY, Reid T, Johnson L, Drewes JE |
| 42 - 49 |
Elaboration and characterization of new conductive porous graphite membranes for electrochemical advanced oxidation processes
Ayadi S, Jedidi I, Rivallin M, Gillot F, Lacour S, Cerneaux S, Cretin M, Ben Amar R |
| 50 - 58 |
The pre-treatment of submerged ultrafiltration membrane by coagulation-Effect of polyacrylamide as a coagulant aid
Yu WZ, Liu HJ, Xu L, Qu JH, Graham N |
| 59 - 67 |
Generating backwashable carbon nanotube mats on the inner surface of polymeric hollow fiber membranes
Gallagher MJ, Huang H, Schwab KJ, Fairbrother DH, Teychene B |
| 68 - 78 |
Characterization and performance of a commercial thin film nanocomposite seawater reverse osmosis membrane and comparison with a thin film composite
Hofs B, Schurer R, Harmsen DJH, Ceccarelli C, Beerendonk EF, Cornelissen ER |
| 79 - 91 |
Grafting of zwitterion from polysulfone membrane via surface-initiated ATRP with enhanced antifouling property and biocompatibility
Yue WW, Li HJ, Xiang T, Qin H, Sun SD, Zhao CS |
| 92 - 98 |
Characterisation of PAMPS-PSS pore-filling membrane for direct methanol fuel cell
Kuzume A, Miki Y, Ito M |
| 99 - 105 |
Galvanic hydrogen pumping in the protonic ceramic perovskite BaCe0.2Zr0.7Y0.1O3-delta
Robinson S, Manerbino A, Coors WG |
| 106 - 112 |
Non-dispersive solvent extraction of neodymium using a hollow fiber contactor: Mass transfer and modeling studies
Ambare DN, Ansari SA, Anitha M, Kandwal P, Singh DK, Singh H, Mohapatra PK |
| 113 - 120 |
The influence of polymer purity and molecular weight on the synthesis of integrally skinned polysulfone membranes
Holda AK, De Roeck M, Hendrix K, Vankelecom IFJ |
| 121 - 124 |
One-pot acylation/benzimidazolization copolymerization approach to side-chain-type proton conductive membranes
Zhang ZH, Xu TW |
| 125 - 131 |
Ionic transport in polyelectrolyte-filled cation-exchange membranes
Agarwal C, Pandey AK, Chaudhury S, Aher VT, Patra AK, Sastry PU, Goswami A |
| 132 - 144 |
Adsorption of small organic solutes from beet distillery condensates on reverse-osmosis membranes: Consequences on the process performances
Fargues C, Sagne C, Szymczyk A, Fievet P, Lameloise ML |
| 145 - 153 |
Preparation and properties of PTFE hollow fiber membranes for desalination through vacuum membrane distillation
Zhu HL, Wang HJ, Wang F, Guo YH, Zhang HP, Chen JY |
| 154 - 163 |
Assessment of SMP fouling by foulant-membrane interaction energy analysis
Wang QY, Wang ZW, Zhu CW, Mei XJ, Wu ZC |
| 164 - 170 |
A facile method for polyamide membrane modification by poly(sulfobetaine methacrylate) to improve fouling resistance
Zhang Y, Wang Z, Lin WF, Sun HT, Wu LG, Chen SF |
| 171 - 180 |
Preparation and characterization of a novel polysulfone UF membrane using a copolymer with capsaicin-mimic moieties for improved anti-fouling properties
Xu J, Feng X, Hou J, Wang X, Shan BT, Yu LM, Gao CJ |
| 181 - 188 |
Hydrophobic-ZIF-71 filled PEBA mixed matrix membranes for recovery of biobutanol via pervaporation
Liu SN, Liu GP, Zhao XH, Jin WQ |
| 189 - 200 |
Microstructured spacers for submerged membrane filtration systems
Fritzmann C, Hausmann M, Wiese M, Wessling M, Melin T |
| 201 - 211 |
Bacterial anti-adhesive properties of polysulfone membranes modified with polyelectrolyte multilayers
Tang L, Gu WY, Yi P, Bitter JL, Hong JY, Fairbrother DH, Chen KL |
| 212 - 219 |
Properties of sulfonated poly(arylene ether sulfone)/electrospun nonwoven polyacrylonitrile composite membrane for proton exchange membrane fuel cells
Yu DM, Yoon S, Kim TH, Lee JY, Lee J, Hong YT |
| 220 - 229 |
Effect of MFI zeolite intermediate layers on gas separation performance of carbon molecular sieve (CMS) membranes
Wey MY, Tseng HH, Chiang CK |
| 230 - 243 |
Modeling of a combined ion transport and porous membrane reactor for oxy-combustion
Habib MA, Ahmed P, Ben-Mansour R, Badr HM, Kirchen P, Ghoniem AF |
| 244 - 254 |
Fabrication of novel functionalized multi-walled carbon nanotube immobilized hollow fiber membranes for enhanced performance in forward osmosis process
Goh KL, Setiawan L, Wei L, Jiang WC, Wang R, Chen Y |
| 255 - 265 |
Evolution of anion-exchange membrane properties in a full scale electrodialysis stack
Garcia-Vasquez W, Dammak L, Larchet C, Nikonenko V, Pismenskaya N, Grande D |
| 266 - 276 |
Performance-determining membrane properties in reverse electrodialysis
Guler E, Elizen R, Vermaas DA, Saakes M, Nijmeijer K |
| 277 - 285 |
Single household greywater treatment with a moving bed biofilm membrane reactor (MBBMR)
Jabornig S, Favero E |
| 286 - 293 |
A controlled sintering process for more permeable ceramic hollow fibre membranes
Wu ZT, Faiz R, Li T, Kingsbury BFK, Li K |
| 294 - 302 |
Thermally rearranged (TR) poly(benzoxazole-co-amide) membranes for hydrogen separation derived from 3,3'-dihydroxy-4,4'-diamino-biphenyl (HAB), 4,4'-oxydianiline (ODA) and isophthaloyl chloride (IPCl)
Do YS, Seong JG, Kim S, Lee JG, Lee YM |
| 303 - 309 |
Mathematical modelling of filtration in submerged anaerobic MBRs (SAnMBRs): Long-term validation
Robles A, Ruano MV, Ribes J, Seco A, Ferrer J |
| 310 - 317 |
Non-covalent protein-polysaccharide interactions and their influence on membrane fouling
Neemann F, Rosenberger S, Jefferson B, McAdam EJ |
| 318 - 325 |
Hydroxyl pyridine containing polybenzimidazole membranes for proton exchange membrane fuel cells
Yang JS, Xu YX, Zhou L, Che QT, He RH, Li QF |
| 326 - 331 |
Effect of surface pattern formation on membrane fouling and its control in phase inversion process
Gohari RJ, Lau WJ, Matsuura T, Ismail AF |
| 332 - 340 |
Model-based evaluation of the role of Anammox on nitric oxide and nitrous oxide productions in membrane aerated biofilm reactor
Ni BJ, Smets BF, Yuan Z, Pellicer-Nacher C |
| 341 - 349 |
Harvesting of microalgal biomass using MF membrane: Kinetic model, CDE model and extended DLVO theory
Ahmad AL, Yasin NHM, Derek CJC, Lim JK |
| 350 - 375 |
A review on membrane engineering for innovation in wearable fabrics and protective textiles
Gugliuzza A, Drioli E |
| 376 - 382 |
Nanofibrous microfiltration membranes capable of removing bacteria, viruses and heavy metal ions
Wang R, Guan SH, Sato AN, Wang X, Wang Z, Yang R, Hsiao BS, Chu B |
| 383 - 394 |
Synthesis and characterization of crosslinked poly(vinyl alcohol)/poly(allylamine)/2-amino-2-hydroxymethyl-1,3-propanediol/polysu lfone composite membrane for CO2/N-2 separation
Mondal A, Mandal B |
| 395 - 404 |
Enhanced pervaporation dehydration performance of ultrathin hybrid membrane by incorporating bioinspired multifunctional modifier and TiCl4 into chitosan
Zhao J, Wang F, Pan FS, Zhang MX, Yang XY, Li P, Jiang ZY, Zhang P, Cao XZ, Wang BY |
| 405 - 409 |
The effect of Ti on hydrogen absorption and diffusivity in V-Ti-Al alloy membranes
Dolan MD, McLennan KG, Song G, Liang D, Kellam ME |
| 410 - 421 |
Modelling and simulation of permeation behaviour on Pd/PSS composite membranes prepared by "pore-plating" method
Sanz R, Calles JA, Ordonez S, Marin P, Alique D, Furones L |
| 422 - 432 |
Optimization and kinetics of phosphoric acid doping of poly(1-vinylimidazole)-graft-poly(ethylene-co-tetrafluorethylene) proton conducting membrane precursors
Nasef MM, Saidi H, Ahmad A, Ali AA |
| 433 - 439 |
Influence of membrane skin morphology on CO2/N-2 separation at sub-ambient temperatures
Liu L, Sanders ES, Johnson JR, Karvan O, Kulkarni S, Hasse DJ, Koros WJ |
| 440 - 448 |
A study of fouling during long-term fractionation of functional peptides by means of cross-flow ultrafiltration and cross-flow electro membrane filtration
Holder A, Weik J, Hinrichs J |
| 449 - 455 |
Evaluation of flow fields on bubble removal and system performance in an ammonium bicarbonate reverse electrodialysis stack
Hatzell MC, Logan BE |
| 456 - 464 |
Evaluation of ultrafiltration process fouling using a novel transmembrane pressure (TMP) balance approach
Boyd CC, Duranceau SJ |
| 465 - 471 |
Microbial activity catalyzes oxygen transfer in membrane-aerated nitritating biofilm reactors
Pellicer-Nacher C, Domingo-Felez C, Lackner S, Smets BF |
| 472 - 481 |
Biofouling and cleaning effectiveness of surface nanostructured reverse osmosis membranes
Varin KJ, Lin NH, Cohen Y |
| 482 - 491 |
Polar polymer membranes via thermally induced phase separation using a universal crystallizable diluent
Liang HQ, Wu QY, Wan LS, Huang XJ, Xu ZK |
| 492 - 503 |
Insight into the role of amphiphilic pluronic block copolymer as pore-forming additive in PVDF membrane formation
Loh CH, Wang R |
| 504 - 512 |
Multilayered polyamide membranes by spray-assisted 2-step interfacial polymerization for increased performance of trimesoyl chloride (TMC)/m-phenylenediamine (MPD)-derived polyamide membranes
Tsuru T, Sasaki S, Kamada T, Shintani T, Ohara T, Nagasawa H, Nishida K, Kanezashi M, Yoshioka T |
