| 1 - 10 |
High-performance direct methanol alkaline fuel cells using potassium hydroxide-impregnated polyvinyl alcohol/carbon nano-tube electrolytes
Lue SJ, Pan WH, Chang CM, Liu YL |
| 11 - 17 |
Comparison of electrochemical stability of transition metal carbides (WC, W2C, MO2C) over a wide pH range
Weidman MC, Esposito DV, Hsu YC, Chen JG |
| 18 - 27 |
Evaluation of multivalent phosphate cross-linked chitosan biopolymer membrane for direct borohydride fuel cells
Ma J, Sahai Y, Buchheit RG |
| 28 - 34 |
Preparation and characterization of bifunctional graphitized carbon-supported Pt composite electrode for unitized regenerative fuel cell
Pai YH, Tseng CW |
| 35 - 46 |
ESR, XPS, and thin-film RRDE characterization of nano structured carbon materials for catalyst support in PEM fuel cells
Larsen MJ, Skou EM |
| 47 - 55 |
Thin film growth of yttria stabilized zirconia by aerosol assisted chemical vapor deposition
Schlupp MVF, Prestat M, Martynczuk J, Rupp JLM, Bieberle-Hutter A, Gauckler LJ |
| 56 - 62 |
Nanostructured tungsten carbide/carbon composites synthesized by a microwave heating method as supports of platinum catalysts for methanol oxidation
Lu JL, Li ZH, Jiang SP, Shen PK, Li L |
| 63 - 69 |
Synthesis and characterization of Mo-doped SrFeO3-delta as cathode materials for solid oxide fuel cells
Xiao GL, Liu Q, Wang SW, Komvokis VG, Amiridis MD, Heyden A, Ma SG, Chen FL |
| 70 - 77 |
Novel nanostructured high-performance anion exchange ionomers for anion exchange membrane fuel cells
Sun L, Guo JS, Zhou J, Xu QM, Chu D, Chen RR |
| 78 - 84 |
Effect of strontium (Sr) doping on the conductivity of ceria
Jaiswal N, Singh NK, Kumar D, Parkash O |
| 85 - 91 |
Self-ordered titania nanotubes and flat surfaces as a support for the deposition of nanostructured Au-Ni catalyst: Enhanced electrocatalytic oxidation of borohydride
Tamasauskaite-Tamasiunaite L, Balciunaite A, Simkunaite D, Selskis A |
| 92 - 99 |
High voltage retainable Ni-saving high nitrogen stainless steel bipolar plates for proton exchange membrane fuel cells: Phenomena and mechanism
Kumagai M, Myung ST, Ichikawa T, Yashiro H, Katada Y |
| 100 - 107 |
Effect of GDL deformation on the pressure drop of polymer electrolyte fuel cell separator channel
Saha LK, Tabe Y, Oshima N |
| 108 - 113 |
Effect of titanium powder loading in gas diffusion layer of a polymer electrolyte unitized reversible fuel cell
Hwang CM, Ishida M, Ito H, Maeda T, Nakano A, Kato A, Yoshida T |
| 114 - 119 |
A study of electrically insulated oxide substrates for flat-tube segmented-in-series solid oxide fuel cells
Somekawa T, Horiuchi K, Matsuzaki Y |
| 120 - 125 |
Free standing oxide alloy electrolytes for low temperature thin film solid oxide fuel cells
Kerman K, Lai BK, Ramanathan S |
| 126 - 133 |
Fuel cell rejuvenation of hygrothermally aged Nafion (R)
Collette FM, Thominette F, Escribano S, Ravachol A, Morin A, Gebel G |
| 134 - 142 |
Development of a 4-cell air-breathing micro direct methanol fuel cell stack
Yuan ZY, Zhang YF, Leng JX, Gao YH, Liu XW |
| 143 - 148 |
Chromium deposition and interfacial interactions of an electrolyte-air electrode-interconnect tri-layer for solid oxide fuel cells
Jin TG, Lu K |
| 149 - 156 |
Compliant alkali silicate sealing glass for solid oxide fuel cell applications: The effect of protective YSZ coating on electrical stability in dual environment
Chou YS, Thomsen EC, Choi JP, Stevenson JW |
| 157 - 165 |
Thermodynamic analysis of ammonia-fed solid oxide fuel cells
Ishak F, Dincer I, Zamfirescu C |
| 166 - 174 |
The investigation of interaction between La0.9Sr0.1 MnO3 cathode and metallic interconnect for solid oxide fuel cell at reduced temperature
Wu J, Yan D, Pu J, Chi B, Jian L |
| 175 - 183 |
Lattice Boltzmann simulations of liquid droplets development and interaction in a gas channel of a proton exchange membrane fuel cell
Han B, Yu J, Meng H |
| 184 - 189 |
Durability of carbon-silica supported catalysts for proton exchange membrane fuel cells
Dundar F, Uzunoglu A, Ata A, Wynne KJ |
| 190 - 199 |
Exploring calcium tantalates and niobates as prospective catalyst supports for water electrolysis
Velikokhatnyi OI, Kumta PN |
| 200 - 208 |
Carbon nanotube-supported Pt-Co bimetallic catalysts for preferential oxidation of CO in a H-2-rich stream with CO2 and H2O vapor
Wang C, Li BD, Lin HQ, Yuan YZ |
| 209 - 216 |
An electrochemical model for syngas production by co-electrolysis of H2O and CO2
Ni M |
| 217 - 224 |
On the poisoning effect of O-2 and N-2 for the Zr0.9Ti0.1V2 hydrogen storage alloy
Zhang TB, Yang XW, Li JS, Hu R, Xue XY, Fu HZ |
| 225 - 229 |
Performance of Ni-Fe/gadolinium-doped CeO2 anode supported tubular solid oxide fuel cells using steam reforming of methane
Liang B, Suzuki T, Hamamoto K, Yamaguchi T, Sumi H, Fujishiro Y, Ingram BJ, Carter JD |
| 230 - 235 |
Co3O4 nanorods/graphene nanosheets nanocomposites for lithium ion batteries with improved reversible capacity and cycle stability
Tao LQ, Zai JT, Wang KX, Zhang HJ, Xu M, Shen J, Su YZ, Qian XF |
| 236 - 245 |
Investigation of crack patterns and cyclic performance of Ti-Si nanocomposite thin film anodes for lithium ion batteries
Wang YH, He Y, Xiao RJ, Li H, Aifantis KE, Huang XJ |
| 246 - 252 |
Single crystalline lithium titanate nanostructure with enhanced rate performance for lithium ion battery
Lu J, Nan CY, Peng Q, Li YD |
| 253 - 261 |
Carbon coating to suppress the reduction decomposition of electrolyte on the Li4Ti5O12 electrode
He YB, Ning F, Li BH, Song QS, Lv W, Du HD, Zhai DY, Su FY, Yang QH, Kang FY |
| 262 - 268 |
Synthesis of boron-doped Si particles by ball milling and application in Li-ion batteries
Rousselot S, Gauthier M, Mazouzi D, Lestriez B, Guyomard D, Roue L |
| 269 - 275 |
Investigation of CrSi2 and MoSi2 as anode materials for lithium-ion batteries
Courtel FM, Duguay D, Abu-Lebdeh Y, Davidson IJ |
| 276 - 283 |
Self-assembly of Co-Sb-nanocrystal/graphene hybrid nanostructure with improved Li-storage properties via a facile in situ solvothermal route
Zheng YX, Xie J, Liu SY, Song WT, Cao GS, Zhu TJ, Zhao XB |
| 284 - 290 |
Well-ordered spherical LiNixCo(1-2x)MnxO2 cathode materials synthesized from cobolt concentration-gradient precursors
Huang ZL, Gao J, He XM, Li JJ, Jiang CY |
| 291 - 298 |
SnO2-MnO2 composite powders and their electrochemical properties
Hashem AM, Abuzeid HM, Abdel-Ghany AE, Mauger A, Zaghib K, Julien CM |
| 299 - 307 |
Novel polymer electrolyte based on cob-web electrospun multi component polymer blend of polyacrylonitrile/poly(methyl methacrylate)/polystyrene for lithium ion batteries-Preparation and electrochemical characterization
Prasanth R, Aravindan V, Srinivasan M |
| 308 - 313 |
A contribution to the progress of high energy batteries: A metal-free, lithium-ion, silicon-sulfur battery
Hassoun J, Kim J, Lee DJ, Jung HG, Lee SM, Sun YK, Scrosati B |
| 314 - 321 |
Structural and electrochemical properties of LiMoO2
Ben-Kamel K, Amdouni N, Groult H, Mauger A, Zaghib K, Julien CM |
| 322 - 331 |
Study of the electrochemical characteristics of sulfonyl isocyanate/sulfone binary electrolytes for use in lithium-ion batteries
Wu F, Xiang J, Li L, Chen JZ, Tan GQ, Chen RJ |
| 332 - 335 |
Electrochemical performance of an all-solid-state lithium ion battery with garnet-type oxide electrolyte
Ohta S, Kobayashi T, Seki J, Asaoka T |
| 336 - 340 |
A new lithium salt with tetrafluoro-1,2-benzenediolato and lithium tetrafluoroborate for lithium battery electrolytes
Xue ZM, Zhang XF, Zhou W, Chen CH |
| 341 - 346 |
Tris(trimethylsilyl) borate as electrolyte additive to improve performance of lithium-ion batteries
Cai ZJ, Liu YB, Zhao JH, Li L, Zhang YM, Zhang J |
| 347 - 351 |
Electrolyte optimization for the primary lithium metal air battery using an oxygen selective membrane
Crowther O, Keeny D, Moureau DM, Meyer B, Salomon M, Hendrickson M |
| 352 - 356 |
Synthesis of LiCoMnO4 via a sol-gel method and its application in high power LiCoMnO4/Li4Ti5O12 lithium-ion batteries
Huang XK, Lin M, Tong QS, Li XH, Ruan Y, Yang Y |
| 357 - 363 |
Microstructural and electrochemical investigation of functional nanostructured TiO2 anode for Li-ions batteries
Serventi AM, Rodrigues IR, Trudeau ML, Antonelli D, Zaghib K |
| 364 - 368 |
Redox active poly(N-vinylcarbazole) for use in rechargeable lithium batteries
Yao M, Senoh H, Sakai T, Kiyobayashi T |
| 369 - 373 |
Fire-retardant solid polymer electrolyte films prepared from oxetane derivative with dimethyl phosphate ester group
Shibutani R, Tsutsumi H |
| 374 - 379 |
Low-temperature synthesis of nano-micron Li4Ti5O12 by an aqueous mixing technique and its excellent electrochemical performance
Wu FX, Li XH, Wang ZX, Guo HJ, He ZJ, Zhang Q, Xiong XH, Yue P |
| 380 - 383 |
Novel synthesis of LiVPO4F cathode material by chemical lithiation and postannealing
Zheng JC, Zhang B, Yang ZH |
| 384 - 388 |
Synergism of ionic liquid and surfactant molecules in the growth of LiFePO4 nanorods and the electrochemical performances
Teng F, Chen MD, Li GQ, Teng Y, Xu TG, Mho SI, Hua X |
| 389 - 393 |
Enhance electrochemical performance of lithium sulfur battery through a solution-based processing technique
Li KF, Wang B, Su DW, Park J, Ahn H, Wang GX |
| 394 - 399 |
Synthesis and electrochemical properties of a sulfur-multi walled carbon nanotubes composite as a cathode material for lithium sulfur batteries
Ahn W, Kim KB, Jung KN, Shin KH, Jin CS |
