1 - 12 |
Synthesis of ordered mesoporous boron-containing carbon films and their corrosion behavior in simulated proton exchange membrane fuel cells environment Wang T, Zhang CX, Sun X, Guo YX, Guo H, Tang J, Xue HR, Liu MZ, Zhang XX, Zhu L, Xie QQ, He JP |
13 - 21 |
Cross-linked zwitterionic polyelectrolytes based on sulfonated poly(ether sulfone) with high proton conductivity for direct methanol fuel cells Chen L, Sun LN, Zeng R, Xiao SQ, Chen YW |
22 - 27 |
Inorganic thin layer coated porous separator with high thermal stability for safety reinforced Li-ion battery Kim M, Park JH |
28 - 34 |
Ultrafine LiMn2O4/carbon nanotube nanocomposite with excellent rate capability and cycling stability for lithium-ion batteries Xia H, Ragavendran KR, Xie JP, Lu L |
35 - 42 |
Effects of embossing structure on the performance of intermediate-temperature solid oxide fuel cells with gadolinium-doped ceria electrolyte Lee J, Park I, Lee H, Shin D |
43 - 46 |
Direct lamination of solid oxide fuel cell anode support, anode, and electrolyte by sequential tape casting of thermoreversible gel slips Shanti NO, Bierschenk DM, Barnett SA, Faber KT |
47 - 56 |
Tungsten carbide-based anodes for solid oxide fuel cells: Preparation, performance and challenges Torabi A, Etsell TH |
57 - 65 |
Electrodeposited osmium three-dimensional anodes for direct borohydride fuel cells Lam VWS, Kannangara DCW, Alfantazi A, Gyenge EL |
66 - 72 |
Applying functionalized carbon nanotubes to enhance electrochemical performances of tin oxide composite electrodes for Li-ion battery Ahn D, Xiao XC, Li YW, Sachdev AK, Park HW, Yu AP, Chen ZW |
73 - 85 |
Energy and exergy analyses of direct ammonia solid oxide fuel cell integrated with gas turbine power cycle Ishak F, Dincer I, Zamfirescu C |
86 - 92 |
A reduced temperature solid oxide fuel cell with three-dimensionally ordered macroporous cathode Liang B, Suzuki T, Hamamoto K, Yamaguchi T, Sumi H, Fujishiro Y, Ingram BJ, Carter JD |
93 - 99 |
Effect of spatial variation of gas diffusion layer wetting characteristics on through-plane water distribution in a polymer electrolyte fuel cell Kang K, Oh K, Park S, Jo A, Ju H |
100 - 104 |
Mimetic underpotential deposition technique extended for surface nanoengineering of electrocatalysts Wang SH, Zhang HX, Cai WB |
105 - 110 |
Supercapacitors based on low-temperature partially exfoliated and reduced graphite oxide Ye J, Zhang HY, Chen YM, Cheng ZD, Hu L, Ran QY |
111 - 129 |
Performance of batteries for electric vehicles on short and longer term Gerssen-Gondelach SJ, Faaij APC |
130 - 138 |
Comparing batteries to generators as power sources for use with mobile robotics Logan DG, Pentzer J, Brennan SN, Reichard K |
139 - 147 |
Investigation of membrane degradation in polymer electrolyte fuel cells using local gas permeation analysis Kreitmeier S, Schuler GA, Wokaun A, Buchi FN |
148 - 153 |
Electrochemical Raman study of edge plane graphite negative-electrodes in electrolytes containing trialkyl phosphoric ester Nakagawa H, Ochida M, Domi Y, Doi T, Tsubouchi S, Yamanaka T, Abe T, Ogumi Z |
154 - 160 |
A Swiss-roll liquid-gas mixed-reactant fuel cell Aziznia A, Oloman CW, Gyenge EL |
161 - 168 |
Characterisation and optimisation of the cathode/electrolyte couple for SOFC LSCF/BIT07 Letilly M, Joubert O, La Salle AL |
169 - 178 |
Study by electron microscopy of proton exchange membrane fuel cell membrane-electrode assembly degradation mechanisms: Influence of local conditions Guetaz L, Escribano S, Sicardy O |
179 - 185 |
Lithium-sulfur cell with combining carbon nanofibers-sulfur cathode and gel polymer electrolyte Rao MM, Geng XY, Li XP, Hu SJ, Li WS |
186 - 191 |
A functionally graded cathode for proton-conducting solid oxide fuel cells Yang CL, Xu QM |
192 - 204 |
Hybrid fuel cell powertrain for a powered wheelchair driven by rim motors Yang YP, Guan RM, Huang YM |
205 - 211 |
Simultaneous recycling of nickel metal hydride, lithium ion and primary lithium batteries: Accomplishment of European Guidelines by optimizing mechanical pre-treatment and solvent extraction operations Granata G, Pagnanelli F, Moscardini E, Takacova Z, Havlik T, Toro L |
212 - 219 |
A Raman spectroelectrochemical study of potential-controlled benzenethiol desorption from Pt-Fe group alloy films Pomfret MB, Pietron JJ |
220 - 225 |
The role of transition metals in non-precious nitrogen-modified carbon-based electrocatalysts for oxygen reduction reaction Oh HS, Kim H |
226 - 232 |
Sliding mode control of a linearized polymer electrolyte membrane fuel cell model Park G, Gajic Z |
233 - 246 |
Optimisation of performance through electrode formulation in conversion materials for lithium ion batteries: Co3O4 as a case example Ponrouch A, Palacin MR |
247 - 253 |
Improved ceramic anodes for SOFCs with modified electrode/electrolyte interface Hussain AM, Hogh JVT, Zhang W, Stamate E, Thyden KTS, Bonanos N |