1 - 15 |
Fuel processors for automotive fuel cell systems: a parametric analysis Doss ED, Kumar R, Ahluwalia RK, Krumpelt M |
16 - 20 |
Self-discharge of Li/LixMn2O4 batteries in relation to corrosion of aluminum cathode substrates Zhang SS, Ding MS, Jow TR |
21 - 28 |
Effect of Co doping in LiMn2O4 Shen CH, Liu RS, Gundakaram R, Chen JM, Huang SM, Chen JS, Wang CM |
29 - 34 |
Effect of bath temperature on electrochemical properties of the anodically deposited manganese dioxide Ghaemi M, Biglari Z, Binder L |
35 - 40 |
Influence of MH electrode thickness and packing density on the electrochemical performance of air-MH batteries Hu WK, Ye Z, Noreus D |
41 - 45 |
Electrochemical characterization of gel polymer electrolytes prepared with porous membranes Kim DW, Sun YK |
46 - 54 |
Solid-state rechargeable magnesium cell with poly(vinylidenefluoride)-magnesium triflate gel polymer electrolyte Kumar GG, Munichandraiah N |
55 - 59 |
Electrochemical properties of LiMgyMn2-yO4 spinel phases for rechargeable lithium batteries Jeong IS, Kim JU, Gu HB |
60 - 67 |
Electrochemical performance of Ni-deposited graphite anodes for lithium secondary batteries Shi LH, Wang Q, Li H, Wang ZX, Huang XJ, Chen LQ |
68 - 73 |
Effect of oxygen non-stoichiometry on the electrochemical performance of lithium manganese oxide spinels Naghash AR, Lee JY |
74 - 81 |
Preliminary experimental and theoretical analysis of limit performance of molten carbonate fuel cells Arato E, Bosio B, Coste P, Parodi F |
82 - 96 |
Mathematical modeling of proton exchange membrane fuel cells Rowe A, Li XG |
97 - 104 |
Metal hydride electrodes and Ni/MH batteries for automotive high power applications Soria ML, Chacon J, Hernandez JC |
105 - 111 |
Influence of zinc on the stability of the beta(II)/beta(III) nickel hydroxide system during electrochemical cycling Tessier C, Guerlou-Demourgues L, Faure C, Denage C, Delatouche B, Delmas C |
112 - 117 |
Electrochemical characteristics of bilayer film of polyaniline composite positive with polymer, electrolyte binder/polymer electrolyte for Li-ion batteries Chen WX, Xu ZD, Yang LS |
118 - 123 |
Pressure losses at dividing and combining junctions in a molten carbonate fuel cell stack Hirata H, Nakagaki T, Hori M |
124 - 129 |
Ultra-thin silver electrodes for high power density pulse batteries Jin XB, Lu JT, Xia Y, Liu PF, Tong H |
130 - 134 |
Effects of iron substitution for nickel on electrochemical properties of LiNi0.8Co0.2O2 for lithium rechargeable batteries Park SC, Han YS, Lee PS, Ahn S, Lee HM, Lee JY |
135 - 138 |
Electrode performance of romanechite for rechargeable lithium batteries Tsuda M, Arai H, Nemoto Y, Sakurai Y |
139 - 143 |
Effects of bismuth ion and tetrabutylammonium bromide on the dendritic growth of zinc in alkaline zincate solutions Wang JM, Zhang L, Zhang C, Zhang JQ |
144 - 154 |
3-D model calculation for planar SOFC Yakabe H, Ogiwara T, Hishinuma M, Yasuda I |
155 - 161 |
Study of charge acceptance for the lead-acid battery through in situ EC-AFM observation - influence of the open-circuit standing time on the negative electrode Yamaguchi Y, Shiota M, Hosokawa M, Nakayama Y, Hirai N, Hara S |
162 - 166 |
Surface treatment of LiNi0.8Co0.2O2 cathode material for lithium secondary batteries Ying JR, Wan CR, Jiang CY |
167 - 171 |
Electrochemical and structural properties of radio frequency sputtered cobalt oxide electrodes for thin-film supercapacitors Kim HK, Seong TY, Lim JH, Cho WI, Yoon YS |
172 - 177 |
Electrochemical characteristics of Pt-WO3/C and Pt-TiO2/C electrocatalysts in a polymer electrolyte fuel cell Shim J, Lee CR, Lee HK, Lee JS, Cairns EJ |
178 - 185 |
Non-planar architecture for proton exchange membrane fuel cells Merida WR, McLean G, Djilali N |
186 - 197 |
In situ electrochemical investigations of the kinetic and thermodynamic properties of nickel-metal hydride traction batteries Yang XG, Liaw BY |
198 - 204 |
Hydrogen produced from ethanol for internal reforming molten carbonate fuel cell Cavallaro S, Mondello N, Freni S |
205 - 209 |
Comparison of different vehicle power trains Mizsey P, Newson E |
210 - 217 |
Thermodynamic analysis, of a solid oxide fuel cell system fuelled by ethanol Tsiakaras P, Demin A |
218 - 223 |
Investigation of height of electrolyte retention by glass-mat separators in gravitation field Kamenev Y, Kiselevich A, Ostapenko E, Rusin A |
224 - 232 |
The effect of Cd, Co, and Zn as additives on nickel hydroxide opto-electrochemical behavior Provazi K, Giz MJ, Dall'Antonia LH, de Torresi SIC |
233 - 241 |
Cyclic voltammetric behavior of the lead electrode in sodium sulfate solutions Abd El Aal EE |
242 - 252 |
Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000 Part I. Fundamental scientific aspects Costamagna P, Srinivasan S |
253 - 269 |
Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000 Part II. Engineering, technology development and application aspects Costamagna P, Srinivasan S |
270 - 276 |
The ac impedance studies for porous MnO2 cathode by means of modified transmission line model Qu DY |
277 - 282 |
DEMS study of gas evolution at thick graphite electrodes for lithium-ion batteries: the effect of gamma-butyrolactone Lanz M, Novak P |
283 - 287 |
Electrochemical characteristics of LiNi1-xCoxO2 as positive electrode materials for lithium secondary batteries Kinoshita A, Yanagida K, Yanai A, Kida Y, Funahashi A, Nohma T, Yonezu I |
288 - 293 |
Thermal studies of fluorinated ester as a novel candidate for electrolyte solvent of lithium metal anode rechargeable cells Yamaki JI, Yamazaki I, Egashira M, Okada S |
294 - 301 |
Studies on the cycle life of commercial lithium ion batteries during rapid charge-discharge cycling Li J, Murphy E, Winnick J, Kohl PA |
302 - 309 |
The effects of pulse charging on cycling characteristics of commercial lithium-ion batteries Li J, Murphy E, Winnick J, Kohl PA |
310 - 316 |
Compressive mica seals for SOFC applications Simner SP, Stevenson JW |
317 - 321 |
A high-performance phosphoric acid fuel cell Neergat M, Shukla AK |
322 - 325 |
Novel solution-combustion synthesis of LiCoO2 and its characterization as cathode material for lithium-ion cells Rodrigues S, Munichandraiah N, Shukla AK |
326 - 331 |
Effect of Al-substitution on the stability of LiMn2O4 spinel, synthesized by citric acid sol-gel method Hwang BJ, Santhanam R, Liu DG, Tsai YW |