| 7899 - 7916 |
Analysis of multi-phase transport phenomena with catalyst reactions in polymer electrolyte membrane fuel cells - A review
Khan MA, Sunden B, Yuan JL |
| 7917 - 7923 |
Doping effects on complex perovskite Ba3Ca1.18Nb1.82O9-delta intermediate temperature proton conductor
Wang SW, Zhao F, Zhang LL, Brinkman K, Chen FL |
| 7924 - 7930 |
Solvent processible, high-performance partially fluorinated copoly (arylene ether) alkaline ionomers for alkaline electrodes
Zhou JF, Unlu M, Anestis-Richard I, Kim H, Kohl PA |
| 7931 - 7936 |
A highly stable TiB2-supported Pt catalyst for polymer electrolyte membrane fuel cells
Yin SB, Mu SC, Pan M, Fu ZY |
| 7937 - 7944 |
Development of a high power density 2.5 kW class solid oxide fuel cell stack
Yokoo M, Mizuki K, Watanabe K, Hayashi K |
| 7945 - 7950 |
Highly active rhodium/carbon nanocatalysts for ethanol oxidation in alkaline medium
Suo YG, Hsing IM |
| 7951 - 7956 |
Codeposited PtSb/C catalysts for direct formic acid fuel cells
Yu XW, Pickup PG |
| 7957 - 7966 |
Effect and siting of Nafion (R) in a Pt/C proton exchange membrane fuel cell catalyst
Zhang JZ, Hongsirikarn K, Goodwin JG |
| 7967 - 7972 |
Study of operating conditions and cell design on the performance of alkaline anion exchange membrane based direct methanol fuel cells
Prakash GKS, Krause FC, Viva FA, Narayanan SR, Olah GA |
| 7973 - 7978 |
Platinum nanoparticles supported on electrospinning-derived carbon fibrous mats by using formaldehyde vapor as reducer for methanol electrooxidation
Li MY, Chang YZ, Han GY, Yang BS |
| 7979 - 7984 |
Macromolecular protic ionic liquid-based proton-conducting membranes for anhydrous proton exchange membrane application
Chu FQ, Lin BC, Yan F, Qiu LH, Lu JM |
| 7985 - 7988 |
Effects of crossover hydrogen on platinum dissolution and agglomeration
Cheng TTH, Rogers E, Young AP, Ye SY, Colbow V, Wessel S |
| 7989 - 7993 |
Elastic modulus and internal friction of SOFC electrolytes at high temperatures under controlled atmospheres
Kushi T, Sato K, Unemoto A, Hashimoto S, Amezawa K, Kawada T |
| 7994 - 7999 |
Enhancement of oxygen reduction activity with addition of carbon support for non-precious metal nitrogen doped carbon catalyst
Onodera T, Suzuki S, Mizukami T, Kanzaki H |
| 8000 - 8003 |
Amorphous CoSn alloys decorated by Pt as high efficiency electrocatalysts for ethanol oxidation
Wang H, Zhang XT, Wang RF, Ji S, Wang W, Wang QZ, Lei ZG |
| 8004 - 8011 |
Numerical study on the evaporative and condensational dissipation of phosphoric acid in PAFC
Hirata H, Aoki T, Nakajima K |
| 8012 - 8018 |
Thermal insulation of muscovite/glass ceramic foam for solid oxide fuel cell
Liaw DW, Tsai CY, Wei WCJ |
| 8019 - 8030 |
Multiple concentric spirals for the flow field of a proton exchange membrane fuel cell
Juarez-Robles D, Hernandez-Guerrero A, Ramos-Alvarado B, Elizalde-Blancas F, Damian-Ascencio CE |
| 8031 - 8040 |
Two-phase flow pressure drop hysteresis in an operating proton exchange membrane fuel cell
Anderson R, Wilkinson DP, Bi XT, Zhang L |
| 8041 - 8047 |
Electrophoretic deposition of (Mn,Co)(3)O-4 spinel coating for solid oxide fuel cell interconnects
Zhang H, Zhan ZL, Liu XB |
| 8048 - 8056 |
The effect of wetting properties on bubble dynamics and fuel distribution in the flow field of direct methanol fuel cells
Hutzenlaub T, Paust N, Zengerle R, Ziegler C |
| 8057 - 8063 |
Magnesium oxide prepared via metal-chitosan complexation method: Application as catalyst for transesterification of soybean oil and catalyst deactivation studies
Almerindo GI, Probst LFD, Campos CEM, de Almeida RM, Meneghetti SMP, Meneghetti MR, Clacens JM, Fajardo HV |
| 8064 - 8072 |
On the essential role of current density in electrocatalytic activity of the electrodeposited platinum for oxidation of ammonia
Zhong C, Hu WB, Cheng YF |
| 8073 - 8084 |
Effects of different electrode materials on the performance of lithium tetrafluorooxalatophosphate (LiFOP) electrolyte
Zhou L, Dalavi S, Xu MQ, Lucht BL |
| 8085 - 8090 |
Effect of Y substitution for Nb in Li5La3Nb2O12 on Li ion conductivity of garnet-type solid electrolytes
Narayanan S, Thangadurai V |
| 8091 - 8097 |
Electrochemical behaviors of a Li3N modified Li metal electrode in secondary lithium batteries
Wu MF, Wen ZY, Liu Y, Wang XY, Huang LZ |
| 8098 - 8103 |
Nitroxide polymer brushes grafted onto silica nanoparticles as cathodes for organic radical batteries
Lin HC, Li CC, Lee JT |
| 8104 - 8109 |
Improved electrochemical activity of LiMnPO4 by high-energy ball-milling
Ni JF, Kawabe Y, Morishita M, Watada M, Sakai T |
| 8110 - 8115 |
Thermal characteristics of a FeF3 cathode via conversion reaction in comparison with LiFePO4
Zhou MJ, Zhao LW, Okada S, Yamaki J |
| 8116 - 8124 |
A study of lithium ion intercalation induced fracture of silicon particles used as anode material in Li-ion battery
Kalnaus S, Rhodes K, Daniel C |
| 8125 - 8128 |
Development and characterization of a bilayer separator for lithium ion batteries
Huang XS |
| 8129 - 8139 |
Modeling stresses in the separator of a pouch lithium-ion cell
Shi DH, Xiao XR, Huang XS, Kia H |
| 8140 - 8146 |
Investigation of the thermal properties of a Li-ion pouch-cell by electrothermal impedance spectroscopy
Schmidt JP, Manka D, Klotz D, Ivers-Tiffee E |
| 8147 - 8153 |
The role of mechanically induced separator creep in lithium-ion battery capacity fade
Peabody C, Arnold CB |
| 8154 - 8159 |
Synthesis of nano-Fe3O4-loaded tubular carbon nanofibers and their application as negative electrodes for Fe/air batteries
Ito A, Zhao LW, Okada S, Yamaki J |
| 8160 - 8165 |
Synthesis of hydrothermally reduced graphene/MnO2 composites and their electrochemical properties as supercapacitors
Li ZP, Wang JQ, Liu S, Liu XH, Yang SR |
| 8166 - 8169 |
Cost and surface optimization of a remote photovoltaic system for two kinds of panels' technologies
Avril S, Arnaud G, Colin H, Montignac F, Mansilla C, Vinard M |
| 8170 - 8171 |
Pore scale modeling of a proton exchange membrane fuel cell catalyst layer: Effects of water vapor and temperature (vol 196, pg 3195, 2011)
Lange KJ, Sui PC, Djilali N |
