| 173 - 179 |
The mechanisms for the growth of the anodic Pb(II) oxides films formed on Pb-Sb and Pb-Sn alloys in sulfuric acid solution
Liu HT, Yang CX, Liang HH, Yang H, Zhou WF |
| 180 - 187 |
Estimation of battery available capacity under variable discharge currents
Shen WX, Chan CC, Lo EWC, Chau KT |
| 188 - 200 |
Energy and exergy analysis of simple solid-oxide fuel-cell power systems
Chan SH, Low CF, Ding OL |
| 201 - 206 |
Elaboration of a new anode material for all-solid state Zn/MnO2 protonic cells
Telli L, Hammouche A, Brahimi B, De Doncker RW |
| 207 - 212 |
Characterisation of defects observed within the positive grid corrosion layer of the valve regulated lead/acid battery
Ball RJ, Evans R, Deven M, Stevens R |
| 213 - 222 |
Finite element (FE) modelling of current density on the valve regulated lead/acid battery positive grid
Ball RJ, Evans R, Stevens R |
| 223 - 229 |
The factors affecting the electrochemical performance of Li/LixMnO2 solid-state polymer battery
Wang CX, Xia YY, Fujieda T, Sakai T, Muranaga T |
| 230 - 236 |
Corrosion resistance of the intermetallic compound, NiAl,in a molten carbonate fuel cell environment
Xu SB, Zhu YD, Xing H, Zhou BN, Yu ZX |
| 237 - 244 |
Porosity of the cathode during the discharge of SOCl2/Li batteries influence of the porous morphology of the carbons used
Carmier D, Vix-Guterl C, Lahaye J |
| 245 - 252 |
Effects of water-gas shift reaction on simulated performance of a molten carbonate fuel cell
Kim MH, Park HK, Chung GY, Lim HC, Nam SW, Lim TH, Hong SA |
| 253 - 264 |
In situ analysis of the interfacial reactions between MCMB electrode and organic electrolyte solutions
Morigaki K |
| 265 - 272 |
LiNi0.8Co0.2O2 cathode materials synthesized by the maleic acid assisted sol-gel method for lithium batteries
Fey GTK, Shiu RF, Subramanian V, Chen JG, Chen CL |
| 273 - 279 |
Synthesis and electrochemical properties Of V2O5 intercalated with binary polymers
Park NG, Ryu KS, Park YJ, Kang MG, Kim DK, Kang SG, Kim KM, Chang SH |
| 280 - 285 |
Effects of Co, Mn contents on the electrochemical characteristics of the LaNi3.8(CO+Mn)(0.96)Al-0.24 electrodes in potassium hydroxide electrolyte
Chang JK, Shong DS, Tsai WT |
| 286 - 292 |
Structure and performance of porous polymer electrolytes based on P(VDF-HFP) for lithium ion batteries
Shi Q, Yu MX, Zhou X, Yan YS, Wan CR |
| 293 - 299 |
MmNi(3.55)Co(0.75)Mn(0.4)Al(0.3)B(0).(3) hydrogen storage alloys for high-power nickel/metal hydride batteries
Ye H, Huang YX, Chen JX, Zhang H |
| 300 - 304 |
Electrooxidation of methanol on polyaniline without dispersed catalyst particles
Prasad KR |
| 305 - 309 |
Symmetric redox supercapacitor with conducting polyaniline electrodes
Ryu KS, Kim KM, Park NG, Park YJ, Chang SH |
