Journal of Power Sources

Journal of Power Sources, Vol.167, No.2 Entire volume, number list

ISSN: 0378-7753 (Print)

In this Issue (45 articles)

235 - 242	Proton exchange membrane fuel cell from low temperature to high temperature: Material challenges Shao YY, Yin GP, Wang ZB, Gao YZ
243 - 249	Carbon-supported Pd-Co bimetallic nanoparticles as electrocatalysts for the oxygen reduction reaction Wang WM, Zheng D, Du C, Zou ZQ, Zhang XG, Xia BJ, Yang H, Akins DL
250 - 257	Direct carbon fuel cell: Fundamentals and recent developments Cao DX, Sun Y, Wang GL
258 - 264	Effect of starting particulate materials on microstructure and cathodic performance of nanoporous LSM-YSZ composite cathodes Song HS, Kim WH, Hyun SH, Moon J, Kim J, Lee HW
265 - 271	Simultaneous oxygen-reduction and methanol-oxidation reactions at the cathode of a DMFC: A model-based electrochemical impedance spectroscopy study Du CY, Zhao TS, Xu C
272 - 280	Pt and PtRu nanoparticles deposited on single-wall carbon nanotubes for methanol electro-oxidation Liu ZL, Ling XY, Guo B, Hong L, Lee JY
281 - 287	Direct methanol fuel cell with extended reaction zone anode: PtRu and PtRuMo supported on graphite felt Bauer A, Gyenge EL, Oloman CW
288 - 294	Preparation and performance characterization of the Fe-Ni/ScSZ cermet anode for oxidation of ethanol fuel in SOFCs Huang B, Wang SR, Liu RZ, Wen TL
295 - 301	Some issues on performance, analysis of fuel cells in thermodynamic point of view Ro ST, Sohn JL
302 - 308	Surface-modified Nafion membrane by oleylamine-stabilized Pd nanoparticles for DMFC applications Tian AH, Kim JY, Shi JY, Kim K, Lee K
309 - 314	Use of in situ polymerized phenol-formaldehyde resin to modify a Nafion((R)) membrane for the direct methanol fuel cell Wu ZM, Sun GQ, Jin W, Wang Q, Hou HY, Chan KY, Xin Q
315 - 318	Study of carbon-supported Au catalyst as the cathodic catalyst in a direct formic acid fuel cell prepared using a polyvinyl alcohol protection method Chen W, Tang YW, Bao JC, Gao Y, Liu CP, Xing W, Lu TH
319 - 324	Synthesis, sinterability and ionic conductivity of nanocrystalline Pr-doped La2Mo2O9 fast oxide-ion conductors Subramania A, Saradha T, Muzhumathi S
325 - 329	Operation of a proton exchange membrane fuel cell under non-humidified conditions using a membrane-electrode assemblies with composite membrane and electrode Vengatesan S, Kim HJ, Lee SY, Cho E, Ha HY, Oh IH, Lim TH
330 - 335	Carbon nano-chain and carbon nano-fibers based gas diffusion layers for proton exchange membrane fuel cells Kannan AM, Munukutla L
336 - 339	Metal-supported solid oxide fuel cell operated at 400-600 degrees C Hui SQ, Yang DF, Wang ZW, Yick S, Deces-Petit C, Qu W, Tuck A, Maric R, Ghosh D
340 - 348	Application of sol gel spin coated yttria-stabilized zirconia layers for the improvement of solid oxide fuel cell electrolytes produced by atmospheric plasma spraying Rose L, Kesler O, Tang ZL, Burgess A
349 - 357	Monodimensional modeling and experimental study of the dynamic behavior of proton exchange membrane fuel cell stack operating in dead-end mode Mocoteguy P, Druart F, Bultel Y, Besse S, Rakotondrainibe A
358 - 365	Investigations of direct methanol fuel cell (DMFC) fading mechanisms Sarma LS, Chen CH, Wang GR, Hsueh KL, Huang CP, Sheu HS, Liu DG, Lee JF, Hwang BJ
366 - 377	On mechanical behavior and in-plane modeling of constrained PEM fuel cell membranes subjected to hydration and temperature cycles Solasi R, Zou Y, Huang X, Reifsnider K, Condit D
378 - 390	Vapor feed direct methanol fuel cells with passive thermal-fluids management system Guo Z, Faghri A
391 - 397	Current density measurements in direct methanol fuel cells Ay F, Ata A, Dohle H, Sener T, Gorgun H
398 - 405	3-D model of thermo-fluid and electrochemical for planar SOFC Wang GL, Yang YZ, Zhang H, Xia WS
406 - 412	Performance simulation for an anode-supported SOFC using Star-CD code Liu HC, Lee CH, Shiu YH, Lee RL, Yan WM
413 - 419	Electrocatalytic properties improvement on carbon-nanotubes coated reaction surface for micro-DMFC Wang SK, Tseng FG, Yeh TK, Chieng CC
420 - 429	An algebraic model on the performance of a direct methanol fuel cell with consideration of methanol crossover Yin KM
430 - 441	Non-destructive delamination detection in solid oxide fuel cells Gazzarri JI, Kesler O
442 - 449	Portable DMFC system with methanol sensor-less control Chen CY, Liu DH, Huang CL, Chang CL
450 - 454	Flexible graphite-based integrated anode plate for direct methanol fuel cells at high methanol feed concentration Zhang HF, Hsing IM
455 - 460	Performance characterization of passive direct methanol fuel cells Chen R, Zhao TS
461 - 471	Exergetic life cycle assessment of hydrogen production from renewables Granovskii M, Dincer I, Rosen MA
472 - 481	Perovskite catalysts for the auto-reforming of sulfur containing fuels Dinka P, Mukasyan AS
482 - 485	Hydrolytic cleavage of ammonia-borane complex for hydrogen production Mohajeri N, T-Raissi A, Adebiyi O
486 - 490	Carbon deposition during propane dehydrogenation in a fuel cell Feng Y, Luo JL, Chuang KT
491 - 498	Polymer electrolytes based on an electrospun poly(vinylidene fluoride-co-hexafluoropropylene) membrane for lithium batteries Li X, Cheruvally G, Kim JK, Choi JW, Ahn JH, Kim KW, Ahn HJ
499 - 503	Electrochemical performance of Al-doped LiMn2O4 prepared by different methods in solid-state reaction Kakuda T, Uematsu K, Toda K, Sato M
504 - 509	Performance improvement of LiCoO2 by molten salt surface modification Bai Y, Shi HJ, Wang ZX, Chen LQ
510 - 514	Dual-composite polymer electrolytes with enhanced transport properties Panero S, Scrosati B, Sumathipala HH, Wieczorek W
515 - 519	Dynamic TGA-FTIR studies on the thermal stability of lithium/graphite with electrolyte in lithium-ion cell Yang H, Shen XD
520 - 523	Electrochemical properties of Si-Zn-C composite as an anode material for lithium-ion batteries Yoon S, Park CM, Kim H, Sohn HJ
524 - 528	Carbon coatings with olive oil, soybean oil and butter on nano-LiFePO4 Kim K, Jeong JH, Kim IJ, Kim HS
529 - 535	Novel SnS2-nanosheet anodes for lithium-ion batteries Kim TJ, Kirn C, Son D, Choi M, Park B
536 - 544	Hydrometallurgical process for recovery of cobalt from waste cathodic active material generated during manufacturing of lithium ion batteries Swain B, Jeong J, Lee JC, Lee GH, Sohn JS
545 - 549	Evaluation of SiO2 and TiO2 coated BaFeO4 cathode materials for zinc alkaline and lithium non-aqueous primary batteries Walz KA, Handrick A, Szczech JR, Stoiber LC, Suyama AN, Suyama WF, Zeltner WA, Johnson CS, Anderson MA
550 - 550	Preparation of Nafion-sulfonated clay nanocomposite membrane for direct menthol fuel cells via a film coating process (vol 165, pg 1, 2007) Kim TK, Kang M, Choi YS, Kim HK, Lee W, Chang H, Seung D