| E77 - E83 |
Fabrication of various nickel nanostructures by manipulating the one-step electrodeposition process
Chung YW, Leu IC, Lee JH, Yen JH, Hon MH |
| E84 - E90 |
Catalytic reduction of NO by methane using a Pt/C/polybenzimidazole/Pt/C fuel cell
Petrushina IM, Cleemann LN, Refshauge R, Bjerrum NJ, Bandur VA |
| F95 - F101 |
Modeling of ultrathin two-phase catalyst layers in PEFCs
Wang QP, Eikerling M, Song DT, Liu ZS |
| K11 - K14 |
Controlling optical properties of aluminum oxide using electrochemical deposition
Chen HM, Hsin CF, Liu RS, Hu SF, Huang CY |
| P69 - P76 |
Mesoscopic hole conduction in nanocrystalline SrTiO3 - A detailed analysis by impedance spectroscopy
Balaya P, Jamnik J, Fleig J, Maier J |
| P77 - P85 |
Directly copolymerized poly(arylene sulfide sulfone) and poly(arylene ether sulfone) disulfonated copolymers for use in ionic polymer transducers
Wiles KB, Akle BJ, Hickner MA, Bennett M, Leo DJ, McGrath JE |
| P86 - P91 |
Comparative study of Ga2O3 : Dy3+ phosphors prepared by three methods
Liu XM, Yu CC, Li CX, Lin J |
| S13 - S13 |
The effect of rf-irradiation on electrochemical deposition and its stabilization by nanoparticle doping (vol 154, pg D249, 2007)
Katsir Y, Miller L, Aharonov Y, Ben Jacob E |
| A495 - A499 |
Lithium-reactive Co-3(PO4)(2) nanoparticle coating on high-capacity LiNi0.8Co0.16Al0.04O2 cathode material for lithium rechargeable batteries
Kim Y, Cho J |
| A500 - A506 |
Nuclear magnetic resonance and X-ray absorption spectroscopic studies of lithium insertion in silver vanadium oxide cathodes
Leifer ND, Colon A, Martocci K, Greenbaum SG, Alamgir FM, Reddy TB, Gleason NR, Leising RA, Takeuchi ES |
| A507 - A514 |
H/D isotope effects in LaNi4.5Mn0.5 electrodes
Leardini F, Fernandez JF, Cuevas F |
| A515 - A519 |
SEI layer formation on amorphous si thin electrode during precycling
Lee YM, Lee JY, Shim HT, Lee JK, Park JK |
| A520 - A526 |
Structural transformation of Li[Ni0.5-xCo2xMn0.5-x]O-2 (2x <= 0.1) charged in high-voltage range (4.5 V)
Park BC, Bang HJ, Yoon CS, Myung ST, Prakash J, Sun YK |
| A527 - A533 |
Effect of various organic precursors on the performance of LiFePO4/C composite cathode by coprecipitation method
Ong CW, Lin YK, Chen JS |
| A534 - A541 |
In situ X-ray absorption spectroscopic study of Li1.05Ni0.35Co0.25Mn0.4O2 cathode material coated with LiCoO2
Deb A, Bergmann U, Cramer SP, Cairns EJ |
| A542 - A546 |
Rate characteristics of anatase TiO2 nanotubes and nanorods for lithium battery anode materials at room temperature
Kim J, Cho J |
| A547 - A553 |
Host-guest interactions in single-ion lithium polymer electrolyte
Golodnitsky D, Kovarsky R, Mazor H, Rosenberg Y, Lapides I, Peled E, Wieczorek W, Plewa A, Siekierski M, Kalita M, Settimi L, Scrosati B, Scanlon LG |
| A554 - A560 |
SAXS/DSC study of polymer electrolyte for Zn rechargeable nanostructured galvanic cells
Turkovic A, Pavlovic M, Dubcek P, Lucic-Lavcevic M, Etlinger B, Bernstorff S |
| A561 - A565 |
Comparison of structural changes in fully delithiated Li-x[Ni1/3Co1/3Mn1/3]O-2 and Li-x[Ni0.33Co0.33Mn0.30Mg0.04]O1.96F0.04 cathodes (x=0) upon thermal annealing
Kim Y, Eom J, Kim MG, Sun YK, Yoon CS, Cho JP |
| A566 - A578 |
Changes in the crystal structure and electrochemical properties of LixNi0.5Mn0.5O2 during electrochemical cycling to high voltages
Yabuuchi N, Kumar S, Li HH, Kim YT, Shao-Horn Y |
| A579 - A586 |
Understanding carbon-carbon composites as electrodes of supercapacitors - A study by AC and DC measurements
Pico F, Pecharroman C, Anson A, Martinez MT, Rojo JM |
| A587 - A596 |
Moving boundary model for the discharge of a LiCoO2 electrode
Zhang Q, White RE |
| A597 - A604 |
Tin-transition metal-carbon systems for lithium-ion battery negative electrodes
Todd ADW, Mar RE, Dahn JR |
| B501 - B507 |
La0.8Sr0.2Cr0.98V0.02O3-delta Ce0.9Gd0.1O1.95-Ni anodes for solid oxide fuel cells - Effect of microstructure and Ni content
Madsen BD, Barnett SA |
| B508 - B513 |
Detrimental effect of inert atmospheres on hybrid solar cells based on semiconductor oxides
Lira-Cantu M, Norrman K, Andreasen JW, Casan-Pastor N, Krebs FC |
| B514 - B522 |
Mixed potential in a direct methanol fuel cell - Modeling and experiments
Liu FQ, Wang CY |
| B523 - B527 |
CoS-promoted MoS2 catalysts for SOFC using H2S-containing hydrogen or syngas as fuel
Xu ZR, Luo JL, Chuang KT |
| B528 - B532 |
Improvement of Pt-catalyst dispersion and utilization for direct methanol fuel cells using silane coupling agent
Wu FC, Wan CC, Wang YY, Tsai LD, Hsueh KL |
| B533 - B539 |
Ex situ evaluation of tungsten oxide as a catalyst support for PEMFCs
Chhina H, Campbell S, Kesler O |
| B540 - B547 |
Mechanism of catalyst degradation in proton exchange membrane fuel cells
Virkar AV, Zhou YK |
| B548 - B559 |
Gas concentration impedance of solid oxide fuel cell anodes
Bessler WG, Gewies S |
| B560 - B565 |
Fe-modified, Pt-based cathodic electrocatalysts for oxygen reduction reaction with enhanced methanol tolerance
Gong YM, Yeboah YD, Lvov SN, Balashov V, Wang ZC |
| B566 - B576 |
Characterization and PEMFC testing of Pt1-xMx (M=Ru,Mo,Co,Ta,Au,Sn) anode electrocatalyst composition spreads
Stevens DA, Rouleau JM, Mar RE, Bonakdarpour A, Atanasoski RT, Schmoeckel AK, Debe MK, Dahn JR |
| B577 - B582 |
Synthesis and performance of (La0.75Sr0.25)(1-x)(Cr0.5Mn0.5)O-3 cathode powders of solid oxide fuel cells by gel-casting technique
Zhang L, Jiang SP, Cheng CS, Zhang YJ |
| B583 - B587 |
Electronic transport in single crystals of Gd-doped ceria
Ruiz-Trejo E, Maier J |
| B588 - B592 |
Anode-supported micro-SOFC stacks operated under single-chamber conditions
Liu ML, Lu Z, Wei B, Zhu RB, Huang XQ, Chen KF, Ai G, Su WH |
| B593 - B600 |
Experimental study on ion penetration into pores with pore fractality at carbon electrode for EDLC
Lee GJ, Pyun SI |
| B601 - B608 |
Development of an improved devitrifiable fuel cell sealing glass I. Bulk properties
Flugel A, Dolan MD, Varshneya AK, Zheng Y, Coleman N, Hall M, Earl D, Misture ST |
| C279 - C285 |
Characterization of spark-anodized titanium for biomedical applications
Matykina E, Monfort F, Berkani A, Skeldon P, Thompson GE, Gough J |
| C286 - C293 |
Electrochemical behavior of magnetron-sputtered Al-Cu alloy films in sulfate solutions
Idrac J, Blanc C, Kihn Y, Lafont MC, Mankowski G, Skeldon P, Thompson GE |
| C294 - C298 |
High voltage pulse anodization of a NiTi shape memory alloy
Kawakita J, Stratmann M, Hassel AW |
| C299 - C311 |
The active-passive behavior of chalcopyrite - Comparative study between electrochemical and leaching responses
Viramontes-Gamboa G, Rivera-Vasquez BF, Dixon DG |
| C312 - C317 |
Electrochemical behavior of AISI 304SS with particulate silica coating in 0.1 M NaCl
Tada E, Frankel GS |
| C318 - C325 |
Effects of particulate silica coatings on localized corrosion behavior of AISI 304SS under atmospheric corrosion conditions
Tada E, Frankel GS |
| C326 - C330 |
Electrochemical and SEM characterization of gold-coated stents in vitro
Shih CC, Shih CM, Chou KY, Lin SJ, Su YY |
| C331 - C338 |
Characteristics of the fluorocarbon surface film generated on carbon anode during F-2 evolution in molten KF-2HF
Groult H, Lantelme F, Crassous I, Labrugere C, Tressaud A, Belhomme C, Colisson A, Morel B |
| D293 - D299 |
Adsorption of the additives MPA, MPSA, and SPS onto Cu(111) from sulfuric acid solutions
Taubert CE, Kolb DM, Memmert U, Meyer H |
| D300 - D303 |
Temperature dependence of electrochemical deposition of CdSe
Koh JL, Teh LK, Romanato F, Wong CC |
| D304 - D309 |
Alternating pulsed electrolysis for iron-chromium alloy coatings with continuous composition gradient
Yagi S, Murase K, Hirato T, Awakura Y |
| D310 - D315 |
Compositional and morphological evolutions during the electrodeposition of up to 130 mu m thick cadmium telluride layers
Rousset J, Lincot D |
| D316 - D321 |
Electrochemical preparation of porous copper surfaces in zinc chloride-1-ethyl-3-methyl imidazolium chloride ionic liquid
Lin YW, Tai CC, Sun IW |
| D322 - D327 |
Electrodeposition of gold at glassy carbon electrodes in room-temperature ionic liquids
Oyama T, Okajima T, Ohsaka T |
| D328 - D333 |
Predictive model extraction for polysilicon low-pressure chemical vapor deposition in a commercial scale reactor
Shimizu R, Ogino M, Sugiyama M, Shimogaki Y |
| D334 - D338 |
Electrowinning Al from Al2S3 in molten salt
Xiao Y, van der Plas DW, Bohte J, Lans SC, van Sandwijk A, Reuter MA |
| F102 - F105 |
Oxidation of atomically flat and hydrogen-terminated Si(111) surfaces by hydrogen peroxide
Bensliman F, Sawada Y, Tsujino K, Matsumura M |
| F106 - F110 |
Investigation of ether-substituted quaternary ammonium ionic liquids
Lang CM, Kohl PA |
| F111 - F121 |
A study of anodically grown hydroxide films on an amorphous Ni78Si8B14 alloy
Knutsen T, Diplas S, Valand T, Jorgensen S, Norby T |
| F122 - F133 |
Phase-field modeling of transport-limited electrolysis in solid and liquid states
Pongsaksawad W, Powell AC, Dussault D |
| F134 - F140 |
Usefulness of F(dm/dQ) function for elucidating the ions role in PB films
Agrisuelas J, Gabrielli C, Garcia-Jareno JJ, Gimenez-Romero D, Gregori J, Perrot H, Vicente F |
| G127 - G133 |
Atomic layer deposition and electrical properties of SrTiO3 thin films grown using Sr(C11H19O2)(2), Ti(Oi-C3H7)(4), and H2O
Kwon OS, Lee SW, Han JH, Hwang CS |
| G134 - G140 |
Liquid injection atomic layer deposition of TiOx films using Ti[OCH(CH3)(2)](4)
Watanabe T, Hoffmann-Eifert S, Yang L, Rudiger A, Kugeler C, Hwang CS, Waser R |
| G141 - G146 |
Structural and electrical investigations of pulse-laser-deposited (Pb,Sr)TiO3 films at various oxygen partial pressures
Wang JL, Lai YS, Liou SC, Chou CC, Tsai CC, Juan CP, Tseng HY, Jan CK, Cheng HC |
| H417 - H421 |
Characterization of the Si-SiO2 interface following room temperature ammonia plasma exposure
Jin H, Weber KJ, Smith PJ |
| H422 - H429 |
Comparison of He/O-2 and Ar/O-2 atmospheric-pressure plasma for photoresist etching
Jung MH, Beaudoin SP, Choi HS |
| H430 - H434 |
Hydrogen passivation of LPCVD Si3N4/SiO2/Si stacks by ammonia plasma treatment
Jin H, Weber KJ, Blakers AW |
| H435 - H439 |
Formation of germanium nanocrystals embedded in a silicon-oxygen-nitride layer
Tu CH, Chang TC, Liu PT, Weng CF, Liu HC, Chang LT, Lee SK, Chen WR, Sze SM, Chang CY |
| H440 - H443 |
Effects of O-2 partial pressure and Ga atmosphere on the luminescence of native defects in beta-Ga2O3 phosphor
Liu ZS, Jing XP, Wang LX |
| H444 - H453 |
Synergistic roles of dodecyl sulfate and benzotriazole in enhancing the efficiency of CMP of copper
Hong Y, Devarapalli VK, Roy D, Babu SV |
| H454 - H459 |
Analytical modeling of the interaction of vacancies and oxygen for oxide precipitation in RTA treated silicon wafers
Kissinger G, Dabrowski J, Sattler A, Seuring C, Muller T, Richter H, von Ammon W |
| H460 - H465 |
Critical adhesion energy at the interface between benzocyclobutene and silicon nitride layers
Kwon Y, Seok J, Lu JQ, Cale TS, Gutmann RJ |
| H466 - H471 |
Development of p(+), p, i, n, and n(+)-type CuInGaSe2 layers for applications in graded bandgap multilayer thin-film solar cells
Dharmadasa IM, Chaure NB, Tolan GJ, Samantilleke AP |
| H472 - H475 |
Zirconium doping in titanium oxide photocatalytic films prepared by atomic layer deposition
Qiu SH, Starr TL |
| H476 - H485 |
AFM measurements of interactions between CMP slurry particles and substrate
Burtovyy R, Liu Y, Zdyrko B, Tregub A, Moinpour M, Buehler M, Luzinov I |
| H486 - H494 |
Effects of pad grooves on chemical mechanical planarization
Wang YC, Yang TS |
| H495 - H499 |
Integration and distribution of carbon nanotubes in solution-processed polyaniline/carbon nanotube composites
Ramamurthy PC, Harrell WR, Gregory RV, Rao AM |
| H500 - H506 |
Luminescence of native defects in Zn2GeO4
Liu ZS, Jing XP, Wang LX |
| H507 - H511 |
Use of slurry colloidal behavior in modeling of material removal rates for copper CMP
Gopal T, Talbot JB |
| H512 - H516 |
Improving electrical characteristics of Ta/Ta2O5/Ta capacitors using low-temperature inductively coupled N2O plasma annealing
Tsai KC, Wu WF, Chao CG, Wu CC |
| H517 - H520 |
Structural and electrical properties of epitaxial Nb-doped SrTiO3 film deposited on Si (100) substrate
Xiang WF, Oh S, Choi H, Dong R, Lee D, Seong D, Hwang H |
| H521 - H524 |
Effect of thermal annealing on Ga-doped ZnO films prepared by magnetron sputtering
Sheu JK, Shu KW, Lee ML, Tun CJ, Chi GC |
| H525 - H529 |
Effect of polish by-products on copper chemical mechanical polishing behavior
Han JH, Hah SR, Kang YJ, Park JG |
| H530 - H535 |
Effect of impurity distribution on corrosion behavior of electrodeposited copper in H2O2-based slurry
Lin JY, Wan CC, Wang YY, Chen JC, Lai JY, Fan YD, Chuang JP |
| H536 - H539 |
Rapid melt growth of germanium tunnel junctions
Zhao JL, Seabaugh AC, Kosel TH |
| J177 - J180 |
Intense emission of Ca-5(PO4)(3)F : Tb3+ under VUV excitation and its potential application in PDPs
Liang HB, Zeng Q, Tian ZF, Lin HH, Su Q, Zhang GB, Fu YB |
