| 4381 - 4388 |
The kinetics of cure of epoxides and related sulphur compounds studied by dynamic DSC
Pielichowski K, Czub P, Pielichowski J |
| 4389 - 4400 |
Grafting of diethyl maleate and maleic anhydride onto styrene-b-(ethylene-co-1-butene)-b-styrene triblock copolymer (SEBS)
Passaglia E, Ghetti S, Picchioni F, Ruggeri G |
| 4401 - 4407 |
Poly 1,3-butylene adipate Reoplex (R) as high molecular weight plasticizer for PVC-based cling films - microstructure and number-average molecular weight studied by H-1 and C-13 NMR
Oriol-Hemmerlin C, Pham QT |
| 4409 - 4414 |
End functionalised copolymers prepared by the addition-fragmentation chain transfer method: styrene/methaclylonitrile system
Busfield WK, Zayas-Holdsworth CI, Thang SH |
| 4415 - 4422 |
Bergman cyclopolymerization kinetics of bis-ortho-diynylarenes to polynaphthalene networks. A comparison of calorimetric methods
Shah HV, Babb DA, Smith DW |
| 4423 - 4428 |
Synthesis of poly(silyl ethers) by Ru-catalyzed hydrosilylation
Mabry JM, Paulasaari JK, Weber WP |
| 4429 - 4436 |
Selective synthesis of various di- and triblock copolymers from substituted acetylenes through sequential living polymerization by MoOCl4-based catalysts in anisole
Iwawaki E, Hayano S, Nomura R, Masuda T |
| 4437 - 4444 |
Synthesis of galvinoxyl unit-containing derivatives of poly(phenylacetylene) and polystyrene, and oxygen permeation behavior of their membranes
Kaneko T, Yamamoto T, Tatsumi H, Aoki T, Oikawa E |
| 4445 - 4449 |
Reaction effect on the properties of poly(ethylene terephthalate) and poly(styrene-co-maleic anhydride) blends
Yoon KH, Lee HW, Park OO |
| 4451 - 4459 |
Improvement of thermal and mechanical properties by control of morphologies in PES-modified epoxy resins
Mimura K, Ito H, Fujioka H |
| 4461 - 4465 |
Surface states of PVA/chitosan blended hydrogels
Koyano T, Koshizaki N, Umehara H, Nagura M, Minoura N |
| 4467 - 4472 |
Polymerization of t-butyl acrylate using organoaluminum complexes and correlation between main-chain tacticity and glass transition temperature of the obtained polymers
Liu WH, Nakano T, Okamoto Y |
| 4473 - 4481 |
Particle nucleation loci in emulsion polymerization of methyl methacrylate
Chern CS, Lin CH |
| 4483 - 4490 |
Interfacial behavior of block copolymers in situ-formed in reactive blending of dissimilar polymers
Charoensirisomboon P, Inoue T, Weber M |
| 4491 - 4499 |
Reaction analysis of 3,4-ethylenedioxythiophene with potassium persulfate in aqueous solution by using a calorimeter
Seo KI, Chung IJ |
| 4501 - 4512 |
Semi-rigid thermotropic polyester containing a rigid, bent spirobicromane moieties - primary characterizations and the thermal behavior
Lin LL, Hong JL |
| 4513 - 4521 |
Morphology and fracture toughness of poly(ether sulfone)-blended polycyanurates
Chang JY, Hong JL |
| 4523 - 4530 |
Thermal and mechanical properties of ethylene/alpha-olefin copolymers produced over (2-MeInd)(2)ZrCl2/MAO system
Yoon JS, Lee DH, Park ES, Lee IM, Park DK, Jung SO |
| 4531 - 4536 |
Ionic conduction in partially phosphorylated poly(vinyl alcohol) as polymer electrolytes
Suzuki M, Yoshida T, Koyama T, Kobayashi S, Kimura M, Hanabusa K, Shirai H |
| 4537 - 4542 |
Influences of grafting formulations and processing conditions on properties of silane grafted moisture crosslinked polypropylenes
Liu NC, Yao GP, Huang H |
| 4543 - 4547 |
Proton magnetic resonance imaging in hydrogels: volume phase transition in poly(N-isopropylacrylamide)
Ganapathy S, Rajamohanan PR, Badiger MV, Mandhare AB, Mashelkar RA |
| 4549 - 4558 |
Kinetic analysis of the polycondensation of ABg type monomer with a multifunctional core
Zhou ZP, Yan DY |
| 4559 - 4565 |
Double positive temperature coefficient effects of carbon black-filled polymer blends containing two semicrystalline polymers
Feng JY, Chan CM |
| 4567 - 4572 |
Preparation of poly(L-lactide) microcapsules for fragrant fiber and their characteristics
Hong K, Park S |
| 4573 - 4577 |
Rate enhancement of nitroxide-mediated living free-radical polymerization by continuous addition of initiator
He JP, Chen JM, Li L, Pan JY, Li CM, Cao JZ, Tao YF, Hua FJ, Yang YL, McKee GE, Brinkmann S |
| 4579 - 4587 |
Crystallisation of blends of LLDPE with branched VLDPE
Shanks RA, Amarasinghe G |
| 4589 - 4598 |
Novel pH-sensitive chitosan hydrogels: swelling behavior and states of water
Qu X, Wirsen A, Albertsson AC |
| 4599 - 4605 |
Phase differentiation of a tri-phase polymer composite using energy-filtering transmission electron microscopy
Varlot K, Martin JM, Quet C |
| 4607 - 4616 |
Crossover effects and molecular mass regions in solutions of worm-like polymers: a new relation for the determination of their statistical segment length, based on the blob model
Dondos A |
| 4617 - 4624 |
Synthesis and bulk properties of poly(methyl methacrylate)-b-poly(isooctyl acrylate)-b-poly(methyl methacrylate)
Tong JD, Leclere P, Doneux C, Bredas JL, Lazzaroni R, Jerome R |
| 4625 - 4633 |
CTBN rubber phase precipitation in model epoxy resins
Wise CW, Cook WD, Goodwin AA |
| 4635 - 4641 |
Thermogravimetric study of the decomposition process of the system BADGE (n=0)/1,2 DCH
Nunez L, Fraga F, Nunez MR, Villanueva M |
| 4643 - 4649 |
Low-, stray-field imaging and spectroscopic studies of the sodium polyacrylate water uptake
Nunes TG, Guillot G, Bordado JM |
| 4651 - 4659 |
The semicrystalline morphology of aliphatic-aromatic polyamide blends
Powell CS, Kalika DS |
| 4661 - 4669 |
Effects of stress and sulfur dioxide on Spectra (R)
Coates J, DeVries KL |
| 4671 - 4677 |
Microstructure orientation and nanoporous gas transport in semicrystalline block copolymer membranes
Drzal PL, Halasa AF, Kofinas P |
| 4679 - 4689 |
Electron spin resonance (ESR) spectra of amphiphilic spin probes in the triblock copolymer EO13PO30EO13 (Pluronic L64): hydration, dynamics and order in the polymer aggregates
Zhou L, Schlick S |
| 4691 - 4698 |
A small angle X-ray scattering study of pore structure in Tencel (R) cellulose fibres and the effects of physical treatments
Crawshaw J, Cameron RE |
| 4699 - 4707 |
Structure-property relationships for cyanurate-containing, full interpenetrating polymer networks
Calleja FJB, Privalko EG, Sukhorukov DI, Fainleib AM, Sergeeva LM, Shantalii TA, Shtompel VI, Pradas MM, Ferrer GG, Privalko VP |
| 4709 - 4717 |
Synthesis and rheological investigation on phase behaviors of semiflexible type amorphous liquid crystalline poly(ester-imide)s
Kim SO, Kim TK, Chung IJ |
| 4719 - 4727 |
Crystal structures of alpha and beta forms of poly(tetramethylene succinate)
Ichikawa Y, Kondo H, Igarashi Y, Noguchi K, Okuyama K, Washiyama J |
| 4729 - 4735 |
Lyotropic liquid crystal behavior of polystyrene-block-polyisoprene diblock copolymers in toluene as a truly neutral solvent
Wang W, Hashimoto T |
| 4737 - 4742 |
Miscibility and free volume behaviour of a number of polymer blends containing only thermotropic liquid crystalline polymers
Hsieh TT, Tiu C, Simon GP |
| 4743 - 4746 |
On the viscosity of moderately concentrated solutions of poly(ether imide) in a mixed solvent of marginal quality
Maggioni JF, Eich A, Wolf BA, Nunes SP |
| 4747 - 4749 |
Phase structure development in poly(styrene-co-acrylonitrile)/poly(methyl methacrylate) blend under elongational flow
Kim YH, Okamoto M, Kotaka T, Ougizawa T, Tchiba T, Inoue T |
| 4751 - 4755 |
Tracer diffusion in thin polystyrene films
Tseng KC, Turro NJ, Durning CJ |
| 4757 - 4760 |
Improved conductivity of films of ultra high molecular weight polyethylene and polyaniline blends prepared from an m-cresol/decaline mixture
Valenciano GR, Job AE, Mattoso LHC |
| 4761 - 4764 |
Spatially resolved nanomechanical properties of Kevlar (R) fibers
Graham JF, McCague C, Warren OL, Norton PR |
