Polymer

Polymer, Vol.42, No.3 Entire volume, number list

ISSN: 0032-3861 (Print)

In this Issue (48 articles)

851 - 865	Study of the synthesis of poly(4,4'-diphenylether-1,3,4-oxadiazole) in solutions of poly(phosphoric acid) Gomes D, Borges CP, Pinto JC
867 - 872	Synthesis and characterization of new soluble polyaspartimides derived from bis(3-ethyl-5-methyl-4-maleimidophenyl)methane and various diamines Liaw DJ, Liaw BY, Chen JJ
873 - 877	Poly(etherimide)/montmorillonite nanocomposites prepared by melt intercalation: morphology, solvent resistance properties and thermal properties Huang JC, Zhu ZK, Yin J, Qian XF, Sun YY
879 - 887	Preparation and characterization of epoxy composites filled with functionalized nanosilica particles obtained via sol-gel process Kang S, Hong SI, Choe CR, Park M, Rim S, Kim J
889 - 896	Preparation and characterisation of a chromophore-bearing dendrimer Ahmed SM, Budd PM, McKeown NB, Evans KP, Beaumont GL, Donaldson C, Brennan CM
897 - 901	A new relation between the intrinsic viscosity and the molecular mass of polymers derived from the blob model: determination of the statistical segment length of flexible polymers Dondos A
903 - 912	The thermodynamics of basic and amphoteric poly(amido-amine)s containing peptide nitrogens as potential binding sites for metal ions. Part 1 Casolaro M, Bignotti F, Sartore L, Penco M
913 - 923	The flammability of urethane-modified polyisocyanurates and its relationship to thermal degradation chemistry Dick C, Dominguez-Rosado E, Eling B, Liggat JJ, Lindsay CI, Martin SC, Mohammed MH, Seeley G, Snape CE
925 - 930	Solid-state NMR study of aging of Colorbond polymer coating Separovic F, Chau HD, Burgar MI
931 - 939	Influence of type of uniform aromatic amide units on segmented copolyetheresteramides Niesten MCEJ, Tol R, Gaymans RJ
941 - 952	Radical copolymerisation propagation kinetics of methyl ethacrylate and styrene Morris LM, Davis TP, Chaplin RP
953 - 962	Blends of bacterial poly(3-hydroxybutyrate) with synthetic poly(3-hydroxybutyrate) and poly(epichlorohydrin): transport properties of carbon dioxide and water vapour Miguel O, Egiburu JL, Iruin JJ
963 - 969	Interactions between wood polymers studied by dynamic FT-IR spectroscopy Akerholm M, Salmen L
971 - 979	Relation of glass transition temperature to the hydrogen-bonding degree and energy in poly(N-vinyl pyrrolidone) blends with hydroxyl-containing plasticizers. Part 1. Effects of hydroxyl group number in plasticizer molecule Feldstein MM, Shandryuk GA, Plate NA
981 - 990	Relation of glass transition temperature to the hydrogen-bonding degree and energy in poly(N-vinyl pyrrolidone) blends with hydroxyl-containing plasticizers. Part 2. Effects of poly(ethylene glycol) chain length Feldstein MM, Kuptsov SA, Shandryuk GA, Plate NA
991 - 1000	The crystallisation of blends of syndiotactic polystyrene and polyphenylene ether Duff S, Tsuyama S, Iwamoto T, Fujibayashi F, Birkinshaw C
1001 - 1007	Solubility of a UV-stabiliser in some poly(ester-block-ether) copolymers Lazare L, Billingham NC
1009 - 1016	Effect of isotropization on the thermal behavior of two thermotropic copolyesters containing spirobicromane moieties Lin LL, Hong JL
1017 - 1022	Surface characterization of blood compatible amphiphilic graft copolymers having uniform poly(ethylene oxide) side chains Guo SR, Shen LJ, Feng LX
1023 - 1033	Infrared spectroscopic analysis of poly(trimethylene terephthalate) Kim KJ, Bae JH, Kim YH
1035 - 1045	Synthesis and luminescent characteristics of novel phosphorus containing light-emitting polymers Sun YM, Wang CS
1047 - 1053	Phase structure and transitions in a poly(methyloctadecylsilane) oligomer Wu ZM, Xie FC, Hu ZJ, Liu JP, Du BY, He TB
1055 - 1065	Two-phase nanoscale morphology of polymer/LC composites Vaia RA, Tomlin DW, Schulte MD, Bunning TJ
1067 - 1074	Separation of a diblock-triblock copolymer mixture by phase fluctuation chromatography Fujiwara T, Kimura Y, Teraoka I
1075 - 1081	Determination of solvent-independent polymer-polymer interaction parameter by an improved inverse gas chromatographic approach Zhao L, Choi P
1083 - 1094	Nylon 6 nanocomposites by melt compounding Cho JW, Paul DR
1095 - 1100	Influence of nanofillers on the deformation process in layered silicate/polyamide-12 nanocomposites Kim GM, Lee DH, Hoffmann B, Kressler J, Stoppelmann G
1101 - 1107	Synthesis and characterization of bi-functional photorefractive polymers Chen YW, He YK, Wang F, Chen HY, Gong QH
1109 - 1120	Thermoplastic elastomers based on compatibilized poly(ethylene terephthalate) blends: effect of rubber type and dynamic curing Papke N, Karger-Kocsis J
1121 - 1129	XPS and AFM surface studies of solvent-cast PS/PMMA blends Ton-That C, Shard AG, Teare DOH, Bradley RH
1131 - 1142	Structural changes of segmented copolyetheresteramides with uniform aramid units induced by melting and deformation Niesten MCEJ, Harkema S, van der Heide E, Gaymans RJ
1143 - 1156	Description of the tensile stress-strain behaviour of filler-reinforced rubber-like networks using a Langevin-theory-based approach. Part II Meissner B, Matejka L
1157 - 1165	Compatibilization of poly(ether imide)/Rodrun blends by means of a polyarylate Bastida S, Eguiazabal JI, Nazabal J
1167 - 1176	Competition between alpha and gamma phases in isotactic polypropylene: effects of ethylene content and nucleating agents at different cooling rates Foresta T, Piccarolo S, Goldbeck-Wood G
1177 - 1182	Phase behavior of liquid-crystalline copolymer/liquid crystal blends Kihara H, Kishi R, Miura T, Kato T, Ichijo H
1183 - 1200	Morphology and mechanical properties of swollen gels and dry gel films of poly(vinyl alcohol) prepared by crystallization from solutions under simultaneous biaxially stretching Bin Y, Tanabe Y, Nakabayashi C, Kurosu H, Matsuo M
1201 - 1206	Dispersed structure change of smectic clay/poly(methyl methacrylate) nanocomposites by copolymerization with polar comonomers Okamoto M, Morita S, Kim YH, Kotaka T, Tateyama H
1207 - 1217	Elongational flow-induced morphology change of block copolymers - Part 1. A polystyrene-block-poly(ethylene butylene)-block-polystyrene-block-poly(ethylene butylene) tetrablock copolymer with polystyrene spherical microdomains Kotaka T, Okamoto M, Kojima A, Kwon YK, Nojima S
1219 - 1226	Dynamic mechanical properties of metallocene catalyzed linear polyethylenes Nitta KH, Tanaka A
1227 - 1241	Crack healing in poly(methyl methacrylate) induced by co-solvent of methanol and ethanol Hsieh HC, Yang TJ, Lee S
1243 - 1250	Oriented crystallization of alkylating amino-nitropyridine in a matrix of polypropylene Ohta T, Shigemitsu N, Hashimoto T, Suzuki K
1251 - 1260	Synthesis of biodegradable poly(propylene fumarate) networks with poly(propylene fumarate)-diacrylate macromers as crosslinking agents and characterization of their degradation products He S, Timmer MD, Yaszemski MJ, Yasko AW, Engel PS, Mikos AG
1261 - 1264	NMR study of the energy difference and population of the gauche and trans conformations in solid polyethylene Robertson MB, Klein PG, Ward IM, Packer KJ
1265 - 1269	Chlorinated PTMSP membranes: permeability, free volume and physical properties Consolati G, Pegoraro M, Quasso F, Severini F
1271 - 1274	Temporary toughening of polystyrene through mechanical pre-conditioning Govaert LE, van Melick HGH, Meijer HEH
1275 - 1279	Thermal polymerization of uniform macrocyclic ethylene terephthalate dimer Nagahata R, Sugiyama JJ, Goyal M, Goto M, Honda K, Asai M, Ueda M, Takeuchi K
1281 - 1285	Liquid crystal polymer nanocomposites: direct intercalation of thermotropic liquid crystalline polymers into layered silicates Vaia RA, Giannelis EP
1287 - 1291	Measurement of interfacial tension between polyamide-6 and poly(styrene-co-acrylonitrile) by breaking thread method Son Y