Powder Technology

Powder Technology, Vol.361 Entire volume, number list

ISSN: 0032-5910 (Print)

In this Issue (106 articles)

1 - 9	Wall stress analysis in an unsteady hopper flow with ellipsoidal particles Liu SD, Gan JQ, Zou RP, Yu AB, Zhou ZY
10 - 20	Continuum modelling of primary and secondary granular flows in a torsional shear cell Zheng QJ, Luo Q, Yu AB
21 - 32	Coarse-grained DEM study of solids sedimentation in water Xie ZZ, Shen YS, Takabatake K, Yamaguchi A, Sakai M
33 - 44	Particle velocity distribution function around a single bubble in gas-solid fluidized beds Liu RJ, Zhou ZY, Xiao R, Ye M, Yu AB
45 - 51	An experimental study of packing of ellipsoids under vibrations Li CX, Zou RP, Pinson D, Yu AB, Zhou ZY
52 - 61	Modelling of the pyrolysis of low-rank-coal briquettes in an industrial-scale gas heat carrier pyrolyzer Zhuo YT, Shen YS
62 - 73	Numerical simulation of dense-phase pneumatic transport of powder in horizontal pipes Miao Z, Kuang SB, Zughbi H, Yu AB
74 - 86	Numerical study of gas-solid flow behaviors in the air reactor of coal-direct chemical looping combustion with Geldart D particles Li SY, Shen YS
87 - 98	Numerical study of the solid flow behavior in a rotating drum based on a multiphase CFD model accounting for solid frictional viscosity and wall friction Rong WJ, Feng YQ, Schwarz P, Witt P, Li BK, Song T, Zhou JW
99 - 111	An experimentally validated coarse-grain DEM study of monodisperse granular mixing Cai RH, Zhao YZ
112 - 123	Explicitcontact force model for superellipses by Fourier transform and application to superellipse packing Arifuzzaman SM, Dong KJ, Hou QF, Zhu HP, Zeng QH
124 - 135	Model study of central coke charging on ironmaking blast furnace performance: Effects of charing pattern and nut coke Yu XB, Shen YS
136 - 144	CFD modeling of hydrodynamics and kinetic reactions in a heavy oil riser reactor: Influence of downward feed injection scheme Chang J, Wang X, Liu WY, Wang LY, Meng FD
145 - 159	Computational fluid dynamics study of re-blowin operation in an ironmaking blast furnace Liu YR, Curtis J, Shen YS
160 - 170	DEM simulation on random packings of binary tetrahedron-sphere mixtures Zhao B, An XZ, Zhao HY, Gou DZ, Shen LL, Sun XD
171 - 178	Investigation into water vapor and flue gas temperatures on the separation capability of a novel cyclone separator Zhang YM, Yu GY, Jin RZ, Chen XY, Dong KJ, Jiang YC, Wang B
179 - 189	Shape optimization of conical hoppers to increase mass discharging rate Huang XJ, Zheng QJ, Yu AB, Yan WY
190 - 202	Multi-super-ellipsoid model for non-spherical particles in DEM simulation Liu ZH, Zhao YZ
203 - 209	Numerical study on rheological properties for dispersed and aggregated particle systems Udono H, Uruga K, Tsukada T, Sakai M
210 - 219	Flow simulation and performance analysis of a cyclone-granular bed filter You MH, Li ZY, Zhan MS, Liu ML, Sun GG, Chen JQ
220 - 225	CFD-DEM simulations of densification of tetrahedron particles under air impact Gou DZ, An XZ, Zhao B, Yang RY
226 - 237	Experimental and numerical studies of the gas-molten reduction behavior of blast furnace dust particles during in-flight process Xu J, Wang N, Zhou ZY, Chen M, Wang PF
238 - 247	Numerical simulation of particle migration in electrostatic precipitator with different electrode configurations Gao WC, Wang YF, Zhang H, Guo BY, Zheng CH, Guo J, Gao X, Yu AB
248 - 257	Promote cohesive solid flow in a screw feeder with new screw designs Li X, Hou QF, Dong KJ, Zou RP, Yu AB
258 - 273	Application of GPU-DEM simulation on large-scale granular handling and processing in ironmaking related industries Gan JQ, Evans T, Yu AB
274 - 282	Numerical study on mixed charging process and gas-solid flow in COREX melter gasifier You Y, Luo ZG, Zou ZS, Yang RY
283 - 296	Influence of particle shape on microstructure and heat transfer characteristics in blast furnace raceway with CFD-DEM approach Wei GC, Zhang H, An XZ, Jiang SQ
297 - 305	Investigation of densification behavior of tungsten powders during hot isostatic pressing with a 3D multi-particle FEM approach Zou Y, An XZ, Zou RP
306 - 314	DEM simulation of cubical particle percolation in a packed bed Kou MY, Zhou H, Wu SL, Shen YS
315 - 325	CFD-DEM modelling of mixing of granular materials in multiple jets fluidized beds Liu RJ, Zhou ZY, Xiao R, Yu AB
326 - 336	Evaluation of effective thermal conductivity in random packed bed: Heat transfer through fluid voids and effect of packing structure Cheng GJ, Gan JQ, Xu DL, Yu AB
337 - 348	Reactive force field molecular dynamics (ReaxFF MD) simulation of coal oxy-fuel combustion Qiu Y, Zhong WQ, Shao YJ, Yu AB
349 - 362	Particle shape effects on dynamic behaviors in a spouted bed: CFD-DEM study Liu XJ, Gan JQ, Zhong WQ, Yu AB
363 - 373	Orientation of spheroidal particles in single jet bubbling fluidized beds Shrestha S, Kuang SB, Yu AB, Zhou ZY
374 - 388	Elucidation of the role of cohesion in the macroscopic behaviour of coarse particulate systems using DEM Hassanzadeh V, Wensrich CM, Moreno-Atanasio R
389 - 399	Multi-particle FEM modelling on hot pressing of TiC-316L composite powders Wang DF, An XZ, Han P, Jia Q, Fu HT, Zhang H, Yang XH, Zou QC
400 - 413	3D CPFD simulations of gas-solids flow in a CFB downer with cluster-based drag model Wu YY, Shi XG, Liu YC, Wang CX, Gao JS, Lan XY
414 - 423	Numerical prediction on the drag force and heat transfer of non-spherical particles in supercritical water Zhang H, Xiong B, An XZ, Ke CH, Chen J
424 - 434	DEM study on the packing density and randomness for packing of ellipsoids Gan JQ, Yu AB
435 - 445	Segregation of granular binary mixtures with large particle size ratios during hopper discharging process Zhang TF, Gan JQ, Yu AB, Pinson D, Zhou ZY
446 - 446	Particle size distribution recovery in dynamic light scattering by optimized multi-parameter regularization based on the singular value distribution (vol 353, pg 320, 2019) Zhang WW, Shen J, Thomas JC, Mu TT, Xu YA, Xiu WZ, Xu M, Zhu XJ
447 - 447	Isolation of graphene and graphite by supercritical CO2 elutriation technique: CFD simulation and experimental (vol 352, pg 478, 2019) Gai YZ, Xiao D, Navik R, Tan HJ, Shafi S, Zhao YP
448 - 454	MP-PIC simulation of blood cell movement through a LAD with high stenosis Liu J, Yu F, Zhang Y
455 - 461	Distribution and motion behavior of desulfurizer particles in hot metal with mechanical stirring He ML, Wang N, Chen M, Chen M, Li CF
462 - 472	Simulation of desulphurization wastewater evaporation through flue gas Ye XL, Zhang CC, Wang S, Yang D, Guo BY, An XZ, Yu AB
473 - 473	A GPU-based coupled SPH-DEM method for particle fluid flow with free surfaces (vol 338, pg 548, 2018) He Y, Bayly AE, Hassanpour A, Muller F, Wu K, Yang DM
474 - 489	Particle-resolved simulations of catalytic fixed bed reactors: Comparison of turbulence models, LES and PIV measurements Karthik GM, Thaker AH, Buwa VV
490 - 490	An investigation on flowability and compressibility of AA 6061(100-x)-x wt% TiO2 micro and nanocomposite powder prepared by blending and mechanical alloying (vol 201, pg 70, 2010) Sivasankaran S, Sivaprasad K, Narayanasamy R, Iyer VK
491 - 498	Investigation of filtration properties and microbiological characteristics of sewage sludge after physical conditioning with the use of ground walnut shells Wojcik M
499 - 506	Computational fluid dynamics modeling and laboratory analysis of aerosol particles' capture on thin swirling water film in a Vortecone Kumar AR, Levy A, Kumar A, Schafrik S, Novak T
507 - 511	Experimental study on the explosion-propagation law of coal dust with different moisture contents induced by methane explosion Niu YH, Zhang LL, Shi BM
512 - 519	Mechanical properties and tribological behavior of aluminum matrix composites reinforced with Fe-based metallic glass particles: Influence of particle size He TB, Lu TW, Ciftci N, Tan H, Uhlenwinkel V, Nielsch K, Scudino S
520 - 528	Capturing heavy loading microparticles using electrostatic precipitator with square-wave collecting electrode Wen TY, Xue QZ
529 - 539	Efficient enrichment of low-grade refractory rhodochrosite by preconcentration-neutral suspension roasting-magnetic separation process Yuan S, Zhou WT, Han YX, Li YJ
540 - 547	Gas pulsation effect on flow behaviors and heat transfer in a tapered fluidized bed Zhang K, Wang S, Tang YX, Liu GD, He YR
548 - 561	Intermediate size fine coal beneficiation by Reflux (TM) Classifier using statistical approach Kopparthi P, Sachinraj D, Awasthi A, Mukherjee AK, Ranjan A
562 - 570	Investigation of a circulating turbulent fluidized bed with a fractal gas distributor by electrostatic-immune electrical capacitance tomography Wang SN, Sun XL, Xu CL, Bao JT, Peng C, Tang ZY
571 - 580	A new approach for recovering iron from iron ore tailings using suspension magnetization roasting: A pilot-scale study Sun YS, Zhang XL, Han YX, Li YJ
581 - 590	Wear of graphite pebbles modeled using a macroscopic particle model in a pneumatic transport lifting pipe Sun Q, Ye P, Peng W, Yu SY, Zhou HB, Wang J
591 - 599	Recovery of iron from hazardous tailings using fluidized roasting coupling technology Tang ZD, Gao P, Li YJ, Han YX, Li WB, Butt S, Zhang YH
600 - 609	CFD-DEM study of bridging mechanisms at the static solid-liquid surface filtration Hund D, Losch P, Kerner M, Ripperger S, Antonyuk S
610 - 616	Chemical and physical characterization of Konjac glucomannan-based powders by FTIR and C-13 MAS NMR da Silva DF, Ogawa CYL, Sato F, Neto AM, Larsen FH, Matumoto-Pintro PT
617 - 623	Effect of oxygen contents on predominant sintering mechanism during initial stage of pure titanium powder Li DY, He H, Lou J, Li YM, He ZY, Chen YZ, Luo FH
624 - 632	Activation of kaolinite by a low-temperature chemical method and its effect on methylene blue adsorption Asuha S, Fei F, Wurendaodi W, Zhao S, Wu H, Zhuang X
633 - 641	Thermal performance of thermosyphon with flat evaporating surface combined with different sizes of micro pillars Zhao ZC, Zhao K, Ma XL, Chen XD, Li SL, Yang S
642 - 650	Manufacture of fine cellulose powder from chemically crosslinked kraft pulp sheets using dry milling Korpela A, Orelma H
651 - 662	Impact breakage of acicular crystals Saifoori S, Goh WP, Ali M, Ghadiri M
663 - 678	Roles of surfactant and polymer in drug release from spray-dried hybrid nanocrystal-amorphous solid dispersions (HyNASDs) Rahman M, Ahmad S, Tarabokija J, Bilgili E
679 - 686	Mechanically milled powder from cotton gin trash for diverse applications Hague ANMA, Remadevi R, Wang XG, Naebe M
687 - 703	A novel framework for a rational, fully-automatised calibration routine for DEM models of cohesive powders Orefice L, Khinast JG
704 - 710	Impact of oxygen content in powders on the morphology of the laser molten tracks in preparation for additive manufacturing of silicon Le Dantec M, Guniat L, Leistner M, Figi R, Bleiner D, Leparoux M, Hoffmann P
711 - 718	Particle shape matters - Using 3D printed particles to investigate fundamental particle and packing properties Landauer J, Kuhn M, Nasato DS, Foerst P, Briesen H
719 - 726	Numerical study on the fusion gasification characteristics for a char particle Xu Y, Zhai M, Zou X, Zheng Y, Dong P
727 - 738	Deposition of solid particles exposed to the suction of dual pumps in the tank of a pumping station Kang C, Li Q, Li MY, Teng S
739 - 747	The relationship between static and kinetic friction for plant granular materials Wojcik A, Fraczek J, Niemczewska-Wojcik M
748 - 758	Pressure drops of fresh cemented paste backfills through coupled test loop experiments and machine learning techniques Qi CC, Chen QS, Dong XJ, Zhang QL, Yaseen ZM
759 - 768	A lattice Boltzmann study of the collisions in a particle-bubble system under turbulent flows Chen SY, Chen XH, Wan DD, Yi X, Sun X, Ji L, Wang GC
769 - 781	Simulation of bubbles behavior in steel continuous casting mold using an Euler-Lagrange framework with modified bubble coalescence and breakup models Yang WD, Luo ZG, Gu YJ, Liu ZY, Zou ZS
782 - 790	Operational performance characteristics of a novel fluidized bed with the internal separator for pulverized coal self-sustained preheating Song WH, Li SY, Ouyang ZQ
791 - 802	In-situ measurement in the iron ore pellet distribution chain using active RFID technology Bergquist B, Vanhatalo E
803 - 811	Investigations on fluid dynamics of binary particles in a dual fluidized bed reactor system for enhanced calcium looping gasification process Liu YJ, Sun Z, Toan S, Chen SY, Xiang WG
812 - 816	Effect of surface roughness on the detachment between bubble and glass beads with different contact angles Xing YW, Zhang YF, Ding SH, Zheng X, Xu MD, Cao YJ, Gui XH
817 - 826	Designing a 1D/2D W18O49/rGO heterostructure and constructing a bilayer structure of light absorber for highly efficient steam generation Li ZK, Wei N, Zheng M, Yao AP, Xu RQ, Song XJ, Wang HH, Liu Q, Cui HZ
827 - 835	Energy absorption and specific breakage rate of particles under different operating conditions in dry ball milling Gupta VK
836 - 848	CFD-DEM study of air entrainment in falling particle plumes Chu KW, Wang Y, Zheng QJ, Yu AB, Pan RH
849 - 859	The fragmentation mechanism of coal impacted by water jets and abrasive jets Xue YZ, Si H, Chen GH
860 - 866	Apparatus design for measuring electrostatic charge transfer due to particle-particle collisions Chowdhury F, Elchamaa B, Ray M, Sowinski A, Passalacqua A, Mehrani P
867 - 879	Particle velocity and stationary layer height analysis for modification and validation of particulate Plug-2 pressure drop model Rawat A, Kalman H
880 - 893	Extended validation and verification of XPS/AVL-Fire (TM), a computational CFD-DEM software platform Forgber T, Toson P, Madlmeir S, Kureck H, Khinast JG, Jajcevic D
894 - 902	Interaction between iron ore and magnesium additives during induration process of pellets Wang RR, Zhang JL, Liu ZJ, Liu XL, Xu CY, Li Y
903 - 909	A material-saving and robust approach for obtaining accurate out-of-die powder compressibility Hirschberg C, Paul S, Rantanen J, Sun CC
910 - 916	Microencapsulation of n-octadecane and methyl palmitate phase change materials in silica by spray drying process Methaapanon R, Kornbongkotmas S, Ataboonwongse C, Soottitantawat A
917 - 929	Effect of calcium silicate nanoparticle on surface feature of calcium phosphates hybrid bio-nanocomposite using for bone substitute application Aghdam HA, Sanatizadeh E, Motififard M, Aghadavoudi F, Saber-Samandari S, Esmaeili S, Sheikhbahaei E, Safari M, Khandan A
930 - 942	Flow dynamics of binary mixtures of non-spherical particles in the rolling-regime rotating drum Yang SL, Wang H, Wei YG, Hu JH, Chew JW
943 - 956	The effect of polydispersity on the stresses of cylindrical particle flows Hao JH, Li YJ, Guo Y, Jin HH, Curtis JS
957 - 967	The stability, viscosity and thermal conductivity of carbon nanotubes nanofluids with high particle concentration: A surface modification approach Li XK, Chen WJ, Zou CJ
968 - 982	Study of the polymer mortar based on dredged sediments and epoxy resin: Effect of the sediments on the behavior of the polymer mortar Maherzi W, Ennahal I, Benzerzour M, Mammindy-Pajany Y, Abriak NE
983 - 989	An experimental method to measure the friction coefficients between a round particle and a flat plate Zhao S, Schneider HC, Kamlah M
990 - 994	A modified Yoon and Luttrell model for predicting the efficiency of particle-bubble collision Arriagada S, Jaques A, Vinnett L, Acuna C
995 - 1005	Microencapsulation of fermented noni juice via micro-fluidic-jet spray drying: Evaluation of powder properties and functionalities Zhang C, Khoo SLA, Chen XD, Quek SY
1006 - 1020	Simulation on the effect of particle on flow hydrodynamics in a slurry bed Su W, Shi XG, Wu YY, Gao JS, Lan XY
1021 - 1037	Development and verification of a novel design space and improved scale-up procedure for fluid bed granulation using a mechanistic model Kemp IC, van Millingen A, Khaled H
1038 - 1059	Lumped analysis criteria for heat transfer in a diluted co - current moving bed heat exchanger with isothermal walls Bertoli SL, de Almeida J, de Souza CK, Lovatel A, Padoin N, Soares C
1060 - 1069	Prediction of terminal velocity of fractal aggregates with IBM-LBM method Guan L, Yuan ZL, Moghtaderi B, Peng ZB, Evans GM, Gu CH, Doroodchi E
1070 - 1080	Performance investigation of the combined series and parallel arrangement cyclone separator using experimental and CFD approach Venkatesh S, Sakthivel M, Saranav H, Saravanan N, Rathnakumar M, Santhosh KK
1081 - 1092	Modeling of dry snow adhesion during normal impact with surfaces Eidevag T, Abrahamsson P, Matthias E, Rasmuson A