1 - 7 |
Solubility of hydrogen in methanol at temperatures from 248.41 to 308.20K Descamps C, Coquelet C, Bouallou C, Richon D |
9 - 14 |
Thermal decomposition of polymeric aminoborane (H2BNH2)(x) under hydrogen release Baumann J, Baitalow E, Wolf G |
15 - 22 |
Thermal stability and degradation products analysis of benzocyclobutene-terminated imide polymers Zhang YQ, Shen XN, Huang FR |
23 - 29 |
Analysis of the nonisothermal crystallization kinetics in three linear aromatic polyester systems Sahay SS, Krishnan K |
31 - 34 |
The limiting partial molar volume and apparent molar volume of glycylglycine in aqueous KCl solution at 298.15 and 308.15 K Lin GM, Lin RS, Ma L |
35 - 41 |
Pressurization effects on the polymorphic forms of famotidine Nemet Z, Hegedus B, Szantay C, Sztatisz J, Pokol G |
43 - 46 |
Detoxification of phenanthrene by C-elegans evaluated by calorimetry Lisowska K, Palecz B, Dlugonski J |
47 - 51 |
Solvent effect on heats of protonation of some amines Grechin AG, Buschmann HJ, Schollmeyer E |
53 - 58 |
Heat capacity and thermodynamic properties of N-(2-cyanoethyl) aniline (C9H10N2) Tian QF, Tan ZC, Shi Q, Xu F, Sun LX, Zhang T |
59 - 65 |
Differential thermal analysis under quasi-isothermal, quasi-isobaric conditions (Q-DTA) - Part III. Mechanism of congruent and incongruent phase transformations of salt hydrates Paulik F, Bessenyey-Paulik E, Walther-Paulik K |
67 - 71 |
Kinetics and hazards of thermal decomposition of methyl ethyl ketone peroxide by DSC Yuan MH, Shu CM, Kossoy AA |
73 - 77 |
Study of the NaBr-DyBr3 phase diagram by differential thermal analysis Kobertz D, Miller M, Niemann U, Singheiser L, Hilpert K |
79 - 82 |
Complexation behavior of cucurbit[6]uril with short polypeptides Buschmann HJ, Mutihac L, Mutihac RC, Schollmeyer E |
83 - 86 |
Standard enthalpies of formation of Sr2CuO3 and Ca2CuO3 Monayenkova AS, Popova AA, Tiphlova LA, Gorushkina YV, Tsoi AV, Romanova IP, Alyoshin VA |
87 - 94 |
Thermal stability and degradation of the post-use reclaim milk pouches during multiple extrusion cycles Choudhury A, Mukherjee M, Adhikari B |
95 - 99 |
Solidification of metallic tin in dispersed phase Bonicelli MG, Ceccaroni G, Gauzzi F, Mariano G |
101 - 105 |
Kinetics of thermal decomposition of nickel oxalate dihydrate in air Zhan D, Cong CJ, Diakite K, Tao Y, Zhang KL |
107 - 113 |
Polyethylene and polypropylene nanocomposites based upon an oligomerically modified clay Zhang JG, Jiang DD, Wilkie CA |
115 - 122 |
Analysis of the sensitivity and sample-furnace thermal-lag of a differential thermal analyzer Roura P, Farjas J |
123 - 128 |
Excess enthalpies of binary mixtures containing poly(propylene glycols) plus benzyl alcohol, or plus m-cresol, or plus anisole at 308.15 K and at atmospheric pressure Comelli F, Ottani S |
129 - 133 |
The effect of pressure on transformation temperatures and some physical parameters of Fe-32Mn-6Si-3Cr shape memory alloy Tatar C, Yakuphanoglu F |
135 - 141 |
Intrinsic compensation phenomenon in thermally stimulated depolarisation studies Mano JF |
143 - 148 |
Excess molar enthalpies of the ternary mixtures: methyl tert-butyl ether plus 3-methylpentane plus (n-decane or n-dodecane) at 298.15 K Wang ZH, Lu BCY |
149 - 154 |
Thermogravimetric characterization of sulfonated poly(styrene-isobutylene-styrene) block copolymers: effects of processing conditions Suleiman D, Elabd YA, Napadensky E, Sloan JA, Crawford DM |
155 - 165 |
Thermal characterization of Al2O3 and ZnO reinforced silicone rubber as thermal pads for heat dissipation purposes Sim LC, Ramanan SR, Ismail H, Seetharamu KN, Goh TJ |
167 - 171 |
Co-aggregation of fullerene C-60 and thiophene in the non-aromatic solvent cyclohexene Borovkov NY, Blokhina SV, Kutepov AM, Lebedeva NS, Pavlycheva NA |
173 - 182 |
A comparative study on the single-scan and multiple-scan techniques in differential scanning calorimetry Application to the crystallization of the semiconducting Ge0.13Sb0.23Se0.64 alloy Vazquez J, Barreda DGG, Lopez-Alemany PL, Villares P, Jimenez-Garay R |
183 - 190 |
Melting and thermal history of poly(hydroxybutyrate-co-hydroxyvalerate) using step-scan DSC Gunaratne LMWK, Shanks RA |
191 - 195 |
Excess molar enthalpies of binary mixtures containing ethylene glycols or poly(ethylene glycols) plus ethyl alcohol at 308.15 K and atmospheric pressure Bigi A, Comelli F |
197 - 199 |
Thermochemistry of Cs(hydrogen phthalate) and Cs-2(terephthalate) Hu MC, Geng CY, Liu ZH, Jiang YC, Li S |
201 - 210 |
On the kinetics of melting and crystallization of poly(L-lactic acid) by TMDSC Sanchez MS, Ribelles JLG, Sanchez FH, Mano JF |
211 - 215 |
Kinetics of interaction of hardened oil-well cement slurries with acidic solutions from isothermal heat-conduction calorimetry Cestari AR, Vieira EFS, da Rocha FC |