1 - 1 |
The 6th International Conference on Technological Advances of Thin Films & Surface Coatings Zhang S, Goh GKL, Chen Z, Qi GJ, Wong CC, Liu EJ |
2 - 12 |
Doping and electrical properties of cubic boron nitride thin films: A critical review Zhang XW |
13 - 18 |
Mitigating methanol crossover using Pt-Ru catalyst coated on commercial membrane of ethanesulfonyl fluoride through layer-by-layer technique Wan CH, Jheng Y, Lin MT |
19 - 23 |
Investigation of vulcanization of non-crystalline Cu2ZnSnS4 nano-particles Wu SH, Shih CF, Pan HC, Wang YY, Chen HM, Wu CS |
24 - 27 |
Resistance switching of thin AlOx and Cu-doped-AlOx films Wu YT, Jou S, Yang PJ |
28 - 32 |
Effects of Ag doping and annealing on the charge-discharge characteristics of Al0.6Si0.4 thin film anode Wu CH, Hung FY, Lui TS, Chen LH |
33 - 36 |
Growth of self-assembled InGaN quantum dots on Si (111) at reduced temperature by molecular beam epitaxy Chin CW, Hassan Z, Yam FK, Ahmad MA |
37 - 43 |
Effects of H-2 and Ar flow rates on the deposition of hydrogenated silicon thin films by an inductive coupled plasma-chemical vapor deposition system Li C, Hsieh JH, Huang KL, Shao YT, Chen YW |
44 - 47 |
Sol-gel derived ZnO-CeO2 thin films on glass substrate Tseng CF, Hsu WY |
48 - 53 |
Nanocomposites of polymer and inorganic nanoparticles prepared by focused microwave polymerization for optical thin films applications Yu YY, Chen PK |
54 - 58 |
The property and microstructure study of polyimide/nano-TiO2 hybrid films with sandwich structures Liu XX, Yin JH, Kong YN, Chen MH, Feng Y, Wu ZH, Su B, Lei QQ |
59 - 63 |
Effects of electron blocking and hole trapping of the red guest emitter materials on hybrid white organic light emitting diodes Hong LA, Vu HT, Juang FS, Lai YJ, Yeh PH, Tsai YS |
64 - 68 |
Inkjet printing RF bandpass filters on liquid crystal polymer substrates Kao HL, Cho CL, Chang LC, Yeh CS, Wang BW, Chiu HC |
69 - 73 |
Microstructure and electrochemical corrosion behavior of Cr-Ni-Fe alloy deposits electroplated in the presence of trivalent Cr ions Huang CA, Chang JH, Chen CY, Liao KY, Mayer J |
74 - 78 |
Soluble polyimide films as alignment layers for bistable chiral-tilted homeotropic nematic liquid crystal display applications Chang CJ, Tseng IH, Lin YC, Wu BS, Liang BJ, Tsai MH |
79 - 82 |
Effect of applied voltage on phase components of composite coatings prepared by micro-arc oxidation Zhu WJ, Fang YJ, Zheng HD, Tan GX, Cheng HM, Ning CY |
83 - 87 |
Monolayer colloidal mask with tunable interstice size for nanosphere lithography Geng C, Zheng L, Yu J, Yan QF, Wang XQ, Shen GQ, Shen DZ |
88 - 92 |
Palladium nanoparticles supported on reduced graphene oxide: Facile synthesis and highly efficient electrocatalytic performance for methanol oxidation Wang Y, Zhao Y, He WT, Yin J, Su YQ |
93 - 98 |
Characteristics of photocurrent generation in the near-ultraviolet region in Si quantum-dot sensitized solar cells Uchida G, Sato M, Seo H, Kamataki K, Itagaki N, Koga K, Shiratani M |
99 - 102 |
Optical properties and microstructure of sol-gel derived Ca0.4Sm0.4TiO3 thin films Hsu CH, Chan CY |
103 - 106 |
Reliability improvement of a-Si: H thin film transistors on plastic substrate with saturation in deep state after multiple bending cycles Lee MH, Chen PG, Hsu CC |
107 - 111 |
Ga19Sb81 film for multi-level phase-change memory Chang PC, Huang HW, Chang CC, Chang SC, Tsai MJ, Chin TS |
112 - 115 |
The demonstration of a highly efficient SiGe Type-II hetero-junction solar cell with an optimal stress design Liao MH |
116 - 119 |
Microstructure and dielectric property study of polyimide/BaTiO3 nanocomposite films Chen MH, Yin JH, Liu XX, Feng Y, Su B, Lei QQ |
120 - 124 |
Phenomena of n-type metal-oxide-semiconductor-field-effect-transistors with contact etch stop layer stressor for different channel lengths Hsu HW, Lin KC, Lee CC, Twu MJ, Huang HS, Chen SY, Peng MR, Teng HH, Liu CH |
125 - 128 |
Low temperature solid oxide fuel cells with proton-conducting Y:BaZrO3 electrolyte on porous anodic aluminum oxide substrate Ha SB, Su PC, Ji SH, Cha SW |
129 - 133 |
Effects of film thickness and Sn concentration on electrical properties of solution-processed zinc tin oxide thin film transistors Kim CG, Lee NH, Kwon YK, Kang BK |
134 - 138 |
Nonpolar electrical switching behavior in Cu-Si(Cu)O-x-Pt stacks Huang JS, Chen LM, Lin TY, Lee CY, Chin TS |
139 - 143 |
Analysis of crystal defects on GaN-based semiconductors with advanced scanning probe microscope techniques Hofer A, Benstetter G, Biberger R, Leirer C, Bruderl G |
144 - 147 |
Lithiated and sulphonated poly(ether ether ketone) solid state electrolyte films for supercapacitors Chiu KF, Su SH |
148 - 151 |
Significantly enhanced ionic conductivity of yttria-stabilized zirconia polycrystalline nano-film by thermal annealing Yeh TH, Lin RD, Cherng JS |
152 - 156 |
Transfer printing and patterning of stretchable electrospun film Duan YQ, Huang YA, Yin ZP |
157 - 161 |
An electroplating method for copper plane twin boundary manufacturing Wang YS, Lee WH, Chang SC, Nian JN, Wang YL |
162 - 169 |
Comparison of corrosion behaviors between SS304 and Ti substrate coated with (Ti,Zr)N thin films as Metal bipolar plate for unitized regenerative fuel cell Lin MT, Wan CH, Wu WT |
170 - 174 |
Evaluation of the microstructural and photocatalytic properties of aluminum-doped zinc oxide coatings deposited by plasma spraying Su CY, Lu CT, Hsiao WT, Liu WH, Shieu FS |
175 - 181 |
Metallic nanoparticles in active layer for hybrid photovoltaic device applications Yu YY, Chan SH |
182 - 185 |
High rate performance of LiMn2O4 cathodes for lithium ion batteries synthesized by low temperature oxygen plasma assisted sol-gel process Chen CL, Chiu KF, Chen YR, Chen CC, Lin HC, Chiang HY |
186 - 190 |
Mn(OH)(2)/multi-walled carbon nanotube composite thin films prepared by spray coating for flexible supercapacitive devices Liu JS, Hu Y, Chuang TL, Huang CL |
191 - 196 |
Photoelectrochemical properties of WO3 nanoparticulate thin films prepared by carboxylic acid-assisted electrodeposition Kwong WL, Nakaruk A, Koshy P, Sorrell CC |
197 - 200 |
Multi-component transparent conductive oxide films on polyimide substrate prepared by radio frequency magnetron sputtering Zhou YW, Liu X, Lu YH, Hu ZZ, Zhang CK, Wu FY |
201 - 205 |
Determination of Young's modulus and Poisson's ratio of thin films by X-ray methods Fu WE, Chang YQ, He BC, Wu CL |
206 - 211 |
Two step synthesis of CaP/TiO2 nanorod composite coatings with improved protein adsorption Cheng K, Wang TT, Weng WJ, Yu MF, Lin J, Wang HM, Du PY, Han GR |
212 - 217 |
Surface mechanical property assessment of ultra-thin HfO2 films Fu WE, He BC, Chang YQ |
218 - 223 |
Microstructural characterization and chemical compatibility of pulsed laser deposited yttria coatings on high density graphite Sure J, Mishra M, Tarini M, Shankar AR, Krishna NG, Kuppusami P, Mallika C, Mudali UK |
224 - 229 |
Effect of microstructure of TiN film on properties as bipolar plate coatings in polymer electrolyte membrane fuel cell prepared by inductively coupled plasma assisted magnetron sputtering Feng K, Li ZG |
230 - 233 |
Effect of Ni and FeCoV films on magnetoelectricity of piezoelectric Pb(Mg1/3Nb2/3)O-3-PbTiO3 sandwich structures Du ZF, Zhang S, Wang L, Zhao DL |
234 - 237 |
Highly efficient and simplified phosphorescence white organic light-emitting diodes based on synthesized deep-blue host and orange emitter Koo JR, Lee SJ, Hyung GW, Kim BY, Lee DH, Kim WY, Lee KH, Yoon SS, Kim YK |
238 - 243 |
Effect of ZnO buffer layer thickness on the epitaxial growth of GaN by reactive magnetron sputtering Mohanta P, Singh D, Kumar R, Ganguli T, Srinivasa RS, Major SS |
244 - 248 |
Nonpolar a-GaN epilayers with reduced defect density using patterned r-plane sapphire substrates Kong BH, Jung BO, Cho HK, Yoo G, Nam O |
249 - 253 |
Sodium doping in copper-phthalocyanine/C-60 heterojunction for organic photovoltaic applications Chen HJ, Wu HT, Hung KT, Fu SW, Shih CF |
254 - 259 |
An in vitro assessment of surface modification strategies for orthopedic applications Poh CK, Cai YL, Tan XW, Tan HC, Wang W |
260 - 264 |
Hydroxyapatite/ZnO-nanorod composite coatings with adjustable hydrophilicity and Zn release ability Cheng K, Guan ZW, Weng WJ, Wang HM, Lin J, Du PY, Han GR |
265 - 269 |
Texture, microstructure and anti-wear characteristics in isostructural CrAlSiN/W2N multilayer coatings Chan YC, Chen HW, Tsai YZ, Duh JG, Lee JW |
270 - 275 |
Microstructure and thermal cycling behavior of CeO2 coatings deposited by the electron beam physical vapor technique Huang JP, Song GP, Lv HZ, Li YX, Sun Y, He XD, Zhang S, Fu YQ, Du SY, Li YB |
276 - 280 |
Synthesis and characterization of TiO2 nanotube film on fluorine-doped tin oxide glass Wang JS, Wang H, Li HY, Wu JS |
281 - 284 |
Characteristics of ZnO thin film transistor using Ta2O5 gate dielectrics Zhang JQ, Li ZX, Shen LP, Ye C, Wang BY, Wang H |
285 - 290 |
Influence of rod-surface structure on biological interactions between TiO2 nanorod films and proteins/cells Liu Y, Cheng K, Weng WJ, Yu MF, Lin J, Wang HM, Du PY, Han GR |
291 - 295 |
Effects of hydrazine on the solvothermal synthesis of Cu2ZnSnSe4 and Cu2CdSnSe4 nanocrystals for particle-based deposition of films Chiang MH, Fu YS, Shih CH, Kuo CC, Guo TF, Lin WT |
296 - 300 |
Facile preparation of continuous indium metal-organic framework thin films on indium tin oxide glass Dou ZS, Yu JC, Xu H, Cui YJ, Yang Y, Qian GD |
301 - 306 |
Efficient, stable, and flexible dye-sensitized solar cells based on nanocomposite gel electrolytes Lee HF, Chua YT, Yang SM, Hsu PY, Ouyang FY, Tung YL, Kai JJ |
307 - 312 |
Physical properties of sublimated zinc telluride thin films for solar cell applications Shah NA, Mahmood W |
313 - 317 |
Studies of boron diffusivities on (001) and (110) substrate orientation in Si and Ge along vertical/out-of plane and lateral/in-plane directions study Liao MH |
318 - 323 |
Hybrid solar cells based on colloidal nanocrystals and conjugated polymers Yu YY, Ciou CY |
324 - 330 |
Properties of magnetron-sputtered moisture barrier layer on transparent polyimide/graphene nanocomposite film Tsai MH, Chang CJ, Lu HH, Liao YF, Tseng IH |
331 - 334 |
Zr-based metallic glass thin film coating for fatigue-properties improvement of 7075-T6 aluminum alloy Chang YZ, Tsai PH, Li JB, Lin HC, Jang JSC, Li C, Chen GJ, Chen YC, Chu JP, Liaw PK |
335 - 340 |
Mechanical, tribological and corrosion properties of CrBN films deposited by combined direct current and radio frequency magnetron sputtering Jahodova V, Ding XZ, Seng DHL, Gulbinski W, Louda P |
341 - 347 |
Graphene thin film electrodes synthesized by thermally treating co-sputtered nickel-carbon mixed layers for detection of trace lead, cadmium and copper ions in acetate buffer solutions Wang ZM, Lee PM, Liu E |
348 - 351 |
Conductive lithium nickel oxide thin film patterns via inkjet printing technology Huang CC, Su PC, Liao YC |
352 - 356 |
Electrical and mechanical property study on three-component polyimide nanocomposite films with titanium dioxide and montmorillonite Liu XX, Yin JH, Kong YN, Chen MH, Feng Y, Yan K, Li XH, Su B, Lei QQ |
357 - 361 |
Effect of glass tempering on microstructure and functional properties of SnO2:F thin film prepared by atmosphere pressure chemical vapor deposition Gao Q, Liu QY, Li M, Li X, Liu Y, Song CL, Wang JX, Liu JB, Shen G, Han GR |
362 - 367 |
Graphene ultrathin film electrodes modified with bismuth nanoparticles and polyaniline porous layers for detection of lead and cadmium ions in acetate buffer solutions Wang ZM, Li L, Liu EJ |
368 - 373 |
Preparation and characterization of polyacrylic acid coated magnetite nanoparticles functionalized with amino acids Xu Y, Zhuang L, Lin H, Shen H, Li JW |
374 - 379 |
Enhancement of pore size distribution in one-step hybrid pulse anodization of aluminum thin films sputtered on Si substrates Chung CK, Liao MW, Khor OK, Chang HC |
380 - 385 |
Structure and mechanical property evaluation of Cr-Ti-B-N coatings Ho LW, Lee JW, Chen HW, Chan YC, Duh JG |
386 - 391 |
Synthesis of indolo[3,2-b]carbazole-based random copolymers for polymer solar cell applications Chan LH, Lin LC, Yao CH, Liu YR, Jiang ZJ, Cho TY |
392 - 398 |
Size and morphology effects of titania on dye-sensitized solar cells performance Chien WC, Lin CC, Jang SM, Kao TH |
399 - 402 |
Effectively improved field emission for graphene film by mechanical surface modification Wu CX, Li FS, Zhang YG, Guo TL |
403 - 406 |
Hierarchically ordered arrays based on solvent vapor annealed colloidal monolayers for antireflective coating Zheng L, Geng C, Yan QF |
407 - 411 |
Large nonlinear optical activity from hybrid inorganic-organic films with fluorinated benzene as isolation group Liang T, Cui YJ, Yu JC, Lin WX, Yang Y, Qian GD |
412 - 418 |
Electron backscatter diffraction analysis on the microstructures of electrolytic Cu deposition in the through hole filling process Ho CE, Liao CW, Pan CX, Chen HJ, Kuo JC, Chen D |
419 - 426 |
Transparent and conductive W-doped SnO2 thin films fabricated by an aqueous solution process Wang M, Gao YF, Chen Z, Cao CX, Zhou JD, Dai L, Guo XH |
427 - 432 |
Transparent conductive film by large area roll-to-roll processing Wu LYL, Kerk WT, Wong CC |
433 - 436 |
Effect of the ZnS shell layer on the charge storage capabilities of organic bistable memory devices fabricated utilizing CuInS2-ZnS core-shell quantum dots embedded in a poly(methylmethacrylate) layer Yun DY, Kim TW, Kim SW |
437 - 442 |
Characterization of polymer thin coating on substrate by acoustic resonant spectroscopy Sunaga T, Tohmyoh H, Suzuki M |
443 - 447 |
Modeling and validation of mechanical stress in indium tin oxide layer integrated in highly flexible stacked thin films Lee CC |
448 - 451 |
Effects of oxygen partial pressure on structural and gasochromic properties of sputtered VOx thin films Jang WL, Lu YM, Lu YR, Chen CL, Dong CL, Chou WC, Chen JL, Chan TS, Lee JF, Pao CW, Hwang WS |
452 - 456 |
Electric field assisted aerosol assisted chemical vapour deposition of nanostructured metal oxide thin films Naik AJT, Bowman C, Panjwani N, Warwick MEA, Binions R |
457 - 460 |
Ionic nucleated crystallized silicon thin-film transistor fabricated at 130 degrees C Lin CW, Yang SH, Li CY |
461 - 465 |
Characterization of gasochromic vanadium oxides films by X-ray absorption spectroscopy Ho YK, Chang CC, Wei DH, Dong CL, Chen CL, Chen JL, Jang WL, Hsu CC, Chan TS, Kumar K, Chang CL, Wu MK |
466 - 471 |
Synthesis, characterization and electrochemical behavior of Sb-doped ZnO microsphere film Li Q, Cheng K, Weng WJ, Du PY, Han GR |
472 - 476 |
To increase the hydrophobicity and wear resistance of diamond-like carbon coatings by surface texturing using laser ablation process Shum PW, Zhou ZF, Li KY |
477 - 481 |
Influence of thermal heating on diamond-like carbon film properties prepared by filtered cathodic arc Khamnualthong N, Siangchaew K, Limsuwan P |
482 - 486 |
Rapid growth of amorphous carbon films on the inner surface of micron-thick and hollow-core fibers Ji LF, Liu DP, Zhou XW, Song Y, Ni WY, Niu JH, Fan HY |
487 - 490 |
Uniaxial stress effect and hole mobility in high-Ge content strained SiGe (110) P-channel metal oxide semiconductor field effect transistors Cheng SY, Lee MH, Chang ST, Lin CY, Chen KT, Hsieh BF |
491 - 495 |
X-ray photoelectron spectroscopy and transmission electron microscopy study of internally oxidized Nb-Ru coatings Chen YI, Chen SM, Chang LC, Chu HN |
496 - 499 |
Effect of incident angle on thin film growth: A molecular dynamics simulation study Cao YZ, Zhang JJ, Wu C, Yu FL |
500 - 503 |
Effect of nickel concentration on source/drain series resistance and channel resistance of Ni-metal-induced crystallization thin-film transistors Lai MH, Wu YS, Huang JJ |
504 - 508 |
Microstructures and magnetic properties of L1(0) FePt films deposited on NaCl-type films Sun TH, Chen SC, Su WH, Chen JR |
509 - 514 |
Effects of the morphology of inkjet printed zinc oxide (ZnO) on thin film transistor performance and seeded ZnO nanorod growth Liang YN, Lok BK, Wang LB, Feng CG, Lu ACW, Mei T, Hu X |
515 - 520 |
A comparative study of the oxidation behavior of Cr2N and CrN coatings Qi ZB, Liu B, Wu ZT, Zhu FP, Wang ZC, Wu CH |
521 - 525 |
Fabrication and characterization of ZnO nanorods on polished titanium substrate using electrochemical-hydrothermal methods Yeh YM, Chen H |
526 - 529 |
Physical and electrical characteristics of AlGaN/GaN metal-oxide-semiconductor high-electron-mobility transistors with rare earth Er2O3 as a gate dielectric Lin RM, Chu FC, Das A, Liao SY, Chou ST, Chang LB |
530 - 536 |
Investigation of interconnect design on interfacial cracking energy of Al/TiN barriers under a flexural load Lee CC, Su YF, Wu CS, Chiang KN |
537 - 540 |
Impact of plasma treatment on structure and electrical properties of porous low dielectric constant SiCOH material Cheng YL, Huang JF, Chang YM, Leu J |
541 - 544 |
Work function tuning of an ultrathin MgO film on an Ag substrate by generating oxygen impurities at the interface Cho SB, Yun KH, Yoo DS, Ahn K, Chung YC |
545 - 550 |
Solution-phase tailored growth of NB3O7(OH) thin films Wu JS, Wang JS, Li HY, Xue DF |
551 - 556 |
Sn-Ag-Cu solder reaction with Au/Pd/Ni(P) and Au/Pd(P)/Ni(P) platings Ho CE, Lin YC, Wang SJ |
557 - 561 |
Colloidal monolayer at the air/water interface: Large-area self-assembly and in-situ annealing Yu J, Zheng L, Geng C, Wang XY, Yan QF, Wang XQ, Shen GQ, Shen DZ |
562 - 566 |
High dose ion irradiation effects on immiscible AlN/TiN nano-scaled multilayers Milosavljevic M, Obradovic M, Grce A, Perusko D, Pjevic D, Kovac J, Drazic G, Jeynes C |
567 - 570 |
Superhydrophilic SnO2 nanosheet-assembled film Masuda Y, Kato K |
571 - 575 |
Photocatalytic activity of tin-doped TiO2 film deposited via aerosol assisted chemical vapor deposition Chua CS, Tan OK, Tse MS, Ding XZ |
576 - 579 |
Low temperature nanocomposite alignment films for optically compensated bend liquid crystal displays Wu GM, Chen YD, Chou CW, Chien HW |
580 - 587 |
Oxidation resistance and structural evolution of (TiVCrZrHf)N coatings Tsai DC, Chang ZC, Kuo LY, Lin TJ, Lin TN, Shiao MH, Shieu FS |
588 - 592 |
Synthesis and characterization of Cu-Al-Ni shape memory alloy multilayer thin films Gomez-Cortes JF, Juan JS, Lopez GA, No ML |
593 - 596 |
Mechanical stability of titanium and plasma polymer nanoclusters in nanocomposite coatings Palesch E, Marek A, Solar P, Kylian O, Vyskocil J, Biederman H, Cech V |
597 - 601 |
An optically transparent and flexible memory with embedded gold nanoparticles in a polymethylsilsesquioxane dielectric Ooi PC, Aw KC, Gao W, Razak KA |
602 - 605 |
Effect of grain size on magnetic properties and microstructure of Ni80Fe20 thin films Chen YT, Tseng JY, Sheu TS, Lin YC, Lin SH |
606 - 611 |
Thermal stability of CrTaN hard coatings prepared using biased direct current sputter deposition Chen YI, Lin KY, Chou CC |
612 - 616 |
Optimizing hydrophobic and wear-resistant properties of Cr-Al-N coatings Yang YS, Cho TP, Lin JH |