1 - 4 |
Ferroelectric properties of Bi3.25Ce0.75Ti3O12 thin films prepared by a liquid source misted chemical deposition Jeon MK, Chung HJ, Kim KW, Oh KS, Woo SI |
5 - 16 |
Crystalline coatings of aluminosilicate A(12)SiO(5) polymorphs formed by solid state reaction of alumina layers with silicon/silica substrates Meyer DC, Levin AA, Paufler P |
17 - 22 |
ZrO2 thin films with controllable morphology and thickness by spin-coated sol-gel method Chang SM, Doong RA |
23 - 30 |
Formation of cellular films consisting of wurtzite-type zinc oxide nanosheets by mediation of phosphate anions Yamabi S, Yahiro J, Iwai S, Imai H |
31 - 36 |
Improvement in crystallization and electrical properties of barium strontium titanate thin films by gold doping using metal-organic deposition method Wang HW, Nien SW, Lee KC, Wu MC |
37 - 41 |
X-ray reflectivity study of radio frequency sputtered silicon oxide on silicon Solina DM, Cheary RW, Kalceff W, McCredie G |
42 - 49 |
Melting behavior of as-deposited and recrystallized indium nanocrystals Zayed MK, Elsayed-Ali HE |
50 - 55 |
Preparation of photoelectrodes with spectral response in the visible without applied bias based on photochemically deposited copper oxide inside a porous titanium dioxide film Vigil E, Gonzalez B, Zumeta I, Domingo C, Domenech X, Ayllon JA |
56 - 62 |
Studies of niobium thin film produced by energetic vacuum deposition Wu G, Valente AM, Phillips HL, Wang H, Wu AT, Renk TJ, Provencio P |
63 - 67 |
Complexity of the microstructure evolution for optimization cBN growth in a four-step ion-assisted deposition process Wong SF, Ong CW, Pang GKH, Li Q, Lau WM |
68 - 73 |
Electrical and optical properties of highly oriented nanocrystalline vanadium pentoxide Bahgat AA, Ibrahim FA, El-Desoky MM |
74 - 78 |
Effect of multi-coating process on the orientation and microstructure of lead zirconate titanate (PZT) thin films derived by chemical solution deposition Kobayashi T, Ichiki M, Tsaur J, Maeda R |
79 - 85 |
A theoretical model for prediction of deposition efficiency in cold spraying Li CJ, Li WY, Wang YY, Yang GJ, Fukanuma H |
86 - 93 |
Depth profile characterization of electrodeposited multi-thin-film structures by low angle of incidence X-ray diffractometry Nauer M, Ernst K, Kautek W, Neumann-Spallart M |
94 - 98 |
Influence of hydrogen incorporation in sol-gel derived aluminum doped ZnO thin films Sagar P, Kumar M, Mehre RM |
99 - 103 |
Properties of amorphous aluminate dielectrics synthesized via photosensitized pulsed laser ablation of luminescent targets Kwon YW, Li Y, Heo YW, Norton DP |
104 - 110 |
Dominant rate process of silicon surface etching by hydrogen chloride gas Habuka H, Suzuki T, Yamamoto S, Nakamura A, Takeuchi T, Aihara M |
111 - 115 |
Electron energy loss spectroscopy, low energy electron diffraction, and auger electron spectroscopy study of Indium overlayers on Si(111) and Si(100) surfaces Sun MH, Hu C, Zhao RG, Ji H |
116 - 121 |
A study of diamond synthesis by hot filament chemical vapour deposition on nanocomposite coatings Polini R, Amar M, Ahmed W, Kumashiro S, Sein H, Colligon S |
122 - 129 |
The effects of pH and temperature on Ni-Fe-P alloy electrodeposition from a sulfamate bath and the material properties of the deposits Seo MH, Kim DJ, Kim JS |
130 - 136 |
Corrosion protection of 316 L stainless steel by a TiO2 nanoparticle coating prepared by sol-gel method Shen GX, Chen YC, Lin CJ |
137 - 144 |
Effects of temperature on the chemistry and tribology of co-sputtered MoSx-Ti composite thin films Savan A, Simmonds MC, Huang Y, Constable CP, Creasey S, Gerbig Y, Haefke H, Lewis DB |
145 - 149 |
Effect of slurry pH on the defects induced during the plug isolation chemical mechanical polishing Lee WJ, Ko CH |
150 - 158 |
Cr-diamondlike carbon nanocomposite films: Synthesis, characterization and properties Singh V, Jiang JC, Meletis EI |
159 - 163 |
Lateral growth and three-dimensional effects in contacts between NiSi0.82Ge0.18 and p(+)-Si0.82Ge0.18 Persson S, Isheden C, Jarmar T, Zhang SL |
164 - 168 |
Optical properties of fluorinated carbon films prepared by inductively coupled plasmas Song H, Ning ZY, Yu X |
169 - 176 |
Directional-rolling method for strained SiGe/Si films and its application to fabrication of hollow needles Golod SV, Prinz VY, Mashanov VI |
177 - 180 |
Stress-impedance effects in multilayered FeSiB/Cu/FeSiB films Zhou Y, Ding W, Mao XH, Chen JA, Zhang YM, Gao XY |
181 - 185 |
Analysis on the spin reorientation of GdFeCo/DyFeCo exchange-coupled double-layer films Wang XY, Fang M, Li QH, Shen DF, Gan FX |
186 - 191 |
Growth and properties of epitaxial PtMn/NiFe bilayers on Si (001) substrate containing directly deposited ordered PtMn Choi YS, Petford-Long AK, Ward RCC |
192 - 199 |
Study of influence of underlayer on the properties of magnetron sputtered samarium cobalt thin films Wang JY, Ghantasala MK, Sood DK, Evans PJ |
200 - 204 |
Effect of Eu2CuO4/Yttrium-stabilized Z(r)O(2) buffer layers on YB2Cu3O7-x thin films-grown on Si stibstrates Li XL, Gao J, Wong HY, Mai ZH |
205 - 214 |
Particulate assemblies of CdS and TiO2 prepared by Langmuir-Blodgett technique with octadecylamine/methylstearate mixed films Takahashi M, Natori H, Tajima K, Kobayashi K |
215 - 220 |
Preparation and characterization of electroconductive poly(thiophene-co-pyrrolylundecanoic acid) Langmuir-Blodgett films Park YH, Jang JI, Kim KH, Jo WH |
221 - 228 |
Buckle delamination of textured TiO2 thin films on mica Zhao FZ, Wang B, Cui XF, Pan N, Wang HQ, Hou JG |
229 - 234 |
Study of the plasma etching process for low-loss SiO2/Si optical waveguides Zhou LB, Luo FG, Cao MC |
235 - 244 |
Dependence of the emission from tris (8-hydroxyquinoline) aluminum based microcavity on device thickness and the emission layer position Cheung CH, Djurisic AB, Kwong CY, Chan J, Rakic AD, Tam HL, Cheah KW, Liu ZT, Chan WK, Chui PC |
245 - 250 |
Growth modes transition induced by strain relaxation in epitaxial MgO thin films on SrTiO3 (001) substrates Li YR, Liang Z, Zhang Y, Zhu J, Jiang SW, Wei XH |
251 - 256 |
The effect of side chains on the performance of solar cells fabricated from poly[2-methoxy-5-(2'-ethylhexoxy)-1,4-phenylene vinylene] and C-60 dicarboxylate Zheng LP, Zhou QM, Deng XY, Fei W, Bin N, Guo ZX, Yu G, Cao Y |
257 - 261 |
High gas-sensitivity and selectivity of fluorinated zinc phthalocyanine film to some non-oxidizing gases at room temperature Ma XF, Chen HZ, Shi MM, Wu G, Wang M, Huang J |
262 - 265 |
Efficient sodium chlorate/calcium/aluminum cathode for polymer light-emitting diodes Hu YF, Shi SW, Zhang YG, Zhou QG, Wang LX, Ma DG, Li XL |
266 - 290 |
A homogenized free energy model for hysteresis in thin-film shape memory alloys Massad JE, Smith RC |
291 - 295 |
Computations of local electric field and electric forces acting on carbon nanotubes in a direct current plasma sheath Blazek J, Spatenka P, Pacal F, Taschner C, Leonhardt A |
296 - 302 |
Enhanced phosphorescence and electroluminescence in triplet emitters by doping gold into cadmium selenide/zinc sulfide nanoparticles Liu HW, Laskar IR, Huang CP, Cheng JA, Cheng SS, Luo LY, Wang HR, Chen TM |
303 - 309 |
Effect of thermal treatment in oxygen, nitrogen, and air atmospheres on the electrical transport properties of zinc oxide thin films Hamad O, Braunstein G, Patil H, Dhere N |
310 - 319 |
Effect of substrate properties and thermal annealing on the resistivity of molybdenum thin films Schmid U, Seidel H |
320 - 324 |
Evaluation of photocatalytic properties of titanium oxide films prepared by plasma-enhanced chemical vapor deposition Maeda M, Watanabe T |
325 - 329 |
Scanning tunneling microscopy characterization of the surface morphology of copper films grown on mica and quartz Lee SM, Krim J |
330 - 335 |
On the optical properties of gadolinium hydride systems Shalaan E, Schmitt H, Ehses KH |
336 - 343 |
Effect of the inhomogeneity of substrate on wetting transitions Ez-Zahraouy H, Bahmad L, Benyoussef A |
344 - 349 |
Ab initio study of the stability of X (X=Cr, Nb, Ag) ultra-thin layers on Cu(001) Kellou A, Grosdidier T, Tadjer A, Coddet C, Aourag H |
350 - 353 |
Growth and electronic structure of Ag nanofilms on Fe(110) substrates Sasaki H, Tanaka A, Suzuki S |