Advanced Powder Technology

Advanced Powder Technology, Vol.27, No.2 Entire volume, number list

ISSN: 0921-8831 (Print)

In this Issue (62 articles)

299 - 304	One-pot synthesis of ultrafine TiO2 nanoparticles with enhanced thermal conductivity for nanofluid applications Qin ZB, Tan L, Liu ZQ, Chen S, Qin JH, Tang JJ, Li N
305 - 311	Nanocrystalline Ni3Al-based alloys obtained by recycling of aluminium scraps via mechanical alloying and consolidation Antolak-Dudka A, Krasnowski M, Gierlotka S, Kulik T
312 - 322	Experimental investigation of nanofluid free convection over the vertical and horizontal flat plates with uniform heat flux by PIV Laein RP, Rashidi S, Esfahani JA
323 - 329	Enhanced reactivity of nanoscale zero-valent iron prepared by a rotating packed bed with blade packings Lin CC, Chen SC
330 - 337	A facile synthesis of g-C3N4/TiO2 hybrid photocatalysts by sol-gel method and its enhanced photodegradation towards methylene blue under visible light Li CQ, Sun ZM, Xue YL, Yao GY, Zheng SL
338 - 346	An investigation on the tuning effect of glucose-capping on the size and bandgap of CuO nanoparticles Jeyarani WJ, Tenkyong T, Bachan N, Kumar DA, Shyla JM
347 - 353	Transparent nitrogen doped TiO2/WO3 composite films for self-cleaning glass applications with improved photodegradation activity Choi T, Kim JS, Kim JH
354 - 359	A novel method for enhancing interface strength of TiC coated layer/Ti substrate Saba F, Sajjadi SA, Ghadirzadeh A, Di Fonzo F
360 - 371	Enhancing the rate of ex situ mineral carbonation in dunites via ball milling Rigopoulos I, Vasiliades MA, Ioannou I, Efstathiou AM, Godelitsas A, Kyratsi T
372 - 378	Fabrication of desilicated MTW zeolite and its application in catalytic cracking of n-heptane Muraza O, Sanhoob MA, Siddiqui MAB
379 - 387	Numerical study of flow field in new cyclone separators Safikhani H, Mehrabian P
388 - 394	Application of [M(en)(3)](3)[Fe(ox)(3)](2) (M = Zn, Cd, Ni) complexes as new precursor for the synthesis of ferrite micro/nanostructures Hashemi M, Mohandes F, Salavati-Niasari M
395 - 402	Synthesis of nanocrystalline Ni3Fe powder by mechanical alloying using an extreme friction mode Prica CV, Marinca TF, Popa F, Sechel NA, Isnard O, Chicinas I
403 - 410	Experimental investigation and FE simulation of nano-indentation on Al-Al2O3 nanocomposites Wagih A, Fathy A
411 - 416	Studies of optical properties of UV-cured acrylate films modified with spherical silica nanoparticles Suthabanditpong W, Takai C, Fuji M, Buntem R, Shirai T
417 - 425	Melting effect on convective heat transfer from a vertical plate embedded in a non-Darcy porous medium with variable permeability Kameswaran PK, Hemalatha K, Madhavi MVDNS
426 - 435	Simultaneous extraction and preconcentration of Cu2+, Ni2+ and Zn2+ ions using Ag nanoparticle-loaded activated carbon: Response surface methodology Shahamirifard SAR, Ghaedi M, Rahimi MR, Hajati S, Montazerozohori M, Soylak M
436 - 441	A comparative theoretical study on Al2O3 and gamma-Al2O3 nanoparticles with different base fluids over a stretching sheet Ganesh NV, Hakeem AKA, Ganga B
442 - 447	Soluble hydrolysis-resistant composite formulation of curcumin containing alpha-glucosyl hesperidin and polyvinylpyrrolidone Kadota K, Otsu S, Fujimori M, Sato H, Tozuka Y
448 - 453	Synthesis of phosphor-free luminescent, monodisperse, mesoporous silica nanoparticles in the co-presence of double- and single-chain cationic surfactants Ishii H, Kawai S, Nagao D, Konno M
454 - 460	Facile fabrication of light diffuser films based on hollow silica nanoparticles as fillers Suthabanditpong W, Tani M, Takai C, Fuji M, Buntem R, Shirai T
461 - 470	Synthesis of amorphous Fe75Si20-xMxB5 (M = Ti, Ta, Zr) via wet mechanical alloying and its structural, thermal and magnetic characterisation Neamtu BV, Chicinas HF, Marinca TF, Isnard O, Chicinas I, Popa F
471 - 480	Application of thermosensitive polymers in stabilization of colloids Lemanowicz M, Gierczycki A, Kuznik W, Milczynska J, Bulanda P
481 - 485	Effects of A-site deficiency on the electrical conductivity and stability of (La, Co) co-doped SrTiO3 anode materials for intermediate temperature solid oxide fuel cells Luo DW, Xiao WD, Lin F, Luo CY, Li X
486 - 495	Characterization of proppant effective settlement diameter falling in non-Newtonian fracturing fluids Zhang GD, Li MZ, Guo TK, Li YC, Chen ZW
496 - 503	A modified glycine-nitrate combustion method for one-step synthesis of LaFeO3 Komova OV, Simagina VI, Mukha SA, Netskina OV, Odegova GV, Bulavchenko OA, Ishchenko AV, Pochtar AA
504 - 512	On three-dimensional boundary layer flow of Sisko nanofluid with magnetic field effects Hayat T, Muhammad T, Shehzad SA, Alsaedi A
513 - 520	Porous magnetite secondary particles prepared by surfactant-free solvothermal method with non-contact heat-assisted drug releasing property Kim S, Katsumata KI, Okada K, Matsushita N
521 - 530	Development of an empirical wall-friction model for 2D simulations of pseudo-2D bubbling fluidized beds Hernandez-Jimenez F, Sanchez-Prieto J, Cano-Pleite E, Garcia-Gutierrez LM, Acosta-Iborra A
531 - 540	Numerical analysis of mixing of particles in drum mixers using DEM Soni RK, Mohanty R, Mohanty S, Mishra BK
541 - 549	Impact of acidic catalyst to coat superparamagnetic magnesium ferrite nanoparticles with silica shell via sol-gel approach Das H, Arai T, Debnath N, Sakamoto N, Shinozaki K, Suzuki H, Wakiya N
550 - 556	Microstructures and mechanical properties of the ultrafine-grained Mg-3Al-Zn alloys fabricated by powder metallurgy Feng J, Sun HF, Li XW, Zhang J, Fang W, Fang WB
557 - 563	Mechano-chemical processing and characterization of nano-structured FeS powder Soori M, Zarezadeh K, Sheibani S, Rashchi F
564 - 574	Heat transfer and pressure drop characteristics of nanofluid in unsteady squeezing flow between rotating porous disks considering the effects of thermophoresis and Brownian motion Saidi MH, Tamim H
575 - 583	Spray drying as a viable process to produce nano-hydroxyapatite/chitosan (n-HAp/CS) hybrid microparticles mimicking bone composition Ruphuy G, Saralegi A, Lopes JC, Dias MM, Barreiro MF
584 - 590	Preparation of a high performance cobalt catalyst for CO2 reforming of methane Budiman AW, Song SH, Chang TS, Choi MJ
591 - 598	Synthesis and characterization of mesoporous carbon nanofibers and its adsorption for dye in wastewater Li SB, Jia ZG, Li ZY, Li YH, Zhu RS
599 - 609	Force characteristic of a large dense object in a fluidized bed equipped with an inclined air distributor Cai RR, Zhang YG
610 - 617	Effects of hydroxy propyl cellulose (HPC) surfactant on fabrication, microstructure and optical properties of Ce3+:Lu3Al5O12 (Ce:LuAG) transparent ceramics Fan L, Xu J, Shi Y, Xie JJ, Lei F, Zhang L
618 - 624	Ultrasonically assisted fabrication of vaterite submicron-sized carriers Svenskaya YI, Fattah H, Zakharevich AM, Gorin DA, Sukhorukov GB, Parakhonskiy BV
625 - 630	Influence of phosphorous contents on Si incorporation mechanism and properties of SAPO-34 Liu YN, Xiao WC, Xiao S
631 - 637	A novel modification and selective route for the adsorption of Pb2+ by oak charcoal functionalized with glutaraldehyde Hamad H, Ezzeddine Z, Kanaan S, Lakis F, Hijazi A, Moussawi MA
638 - 645	Study and optimization of the filtration performance of multi-fiber filter Li W, Shen SN, Li H
646 - 651	LSCF-GDC composite particles for solid oxide fuel cells cathodes prepared by facile mechanical method Xi XA, Kondo A, Kozawa T, Naito M
652 - 660	Contact force model including the liquid-bridge force for wet-particle simulation using the discrete element method Tsunazawa Y, Fujihashi D, Fukui S, Sakai M, Tokoro C
661 - 672	Numerical study of natural convection of a water-alumina nanofluid in inclined C-shaped enclosures under the effect of magnetic field Makulati N, Kasaeipoor A, Rashidi MM
673 - 683	Prediction of entropy generation for nanofluid flow through a triangular minichannel using neural network Bahiraei M, Majd SM
684 - 691	Preparation and analysis of activated carbon from sewage sludge and corn stalk Li YL, Li YL, Li LP, Shi XJ, Wang Z
692 - 703	Investigation of particle dynamics in a rotary drum by means of experiments and numerical simulations using DEM Santos DA, Barrozo MAS, Duarte CR, Weigler F, Mellmann J
704 - 710	Amorphous FexB100-x nanostructures: Facile synthesis, magnetic properties and their applications as enhanced microwave absorbers at S-and C-bands Zheng XL, Feng J, Pu FZ, Lan YY, Zong Y, Li XH, Wu HJ
711 - 716	Synthesis and formation mechanism of ZrB2-Al2O3 composite powder starting from ZrO2, Al, and BN Yan CL, Liu RJ, Zhang CR, Cao YB, Long XH
717 - 727	Experimental investigation of thermophysical properties, entropy generation and convective heat transfer for a nitrogen-doped graphene nanofluid in a laminar flow regime Mehrali M, Sadeghinezhad E, Rosen MA, Akhiani AR, Latibari ST, Mehrali M, Metselaar HSC
728 - 733	An optimum method for uniform synthesis of zirconia on reduced graphene oxide Panwar V, Bahadur J, Chaudhary B, Pal K
734 - 741	Synthesis, characterization, structural and optical absorption behavior of SnxSbySz powders Abdelkader D, Jebali A, Larbi A, Harizi A, Ben Rabeh M, Khemiri N, Antoni F, Kanzari M
742 - 749	MHD stagnation point flow heat and mass transfer of nanofluids in porous medium with radiation, viscous dissipation and chemical reaction Mabood F, Shateyi S, Rashidi MM, Momoniat E, Freidoonimehr N
750 - 755	Synthesis, characterization and ion exchange isotherm of zeolite Y using Box-Behnken design Oyinade A, Kovo AS, Hill P
756 - 764	Hydrothermal synthesis, characterization and sorption properties of Al/Fe oxide-oxyhydroxide composite powders Mikhaylov VI, Maslennikova TP, Ugolkov VL, Krivoshapkin PV
765 - 772	Surface modification of fumed silica by photo-dimerization reaction of cinnamyl alcohol and cinnamoyl chloride Kawamura A, Liu H, Takai C, Takei T, Razavi HK, Fuji M
773 - 778	Nanophase oxalate precursors of thermoelectric CoSb3 by controlled coprecipitation predicted by thermodynamic modeling Kim SH, Kim MC, Kim MS, Ahn JP, Moon KS, Koo SM, Tafti MY, Park JS, Toprak MS, Lee BH, Kim DK
779 - 785	Study on the differences of Na- and Ca-montmorillonites in crystalline swelling regime through molecular dynamics simulation Zhang X, Yi H, Zhao YL, Min FF, Song SX
786 - 795	Attrition resistance of calcium oxide-copper oxide-cement sorbents for post-combustion carbon dioxide capture Asiedu-Boateng P, Legros R, Patience GS
796 - 796	Structure, morphology, photocatalytic and antibacterial activities of ZnO thin films prepared by sol-gel dip-coating method (vol 24, pg 275, 2013) Thongsuriwong K, Amornpitoksuk P, Suwanboon S