| 1197 - 1202 |
Microwave effects in lead zirconium titanate synthesis: Enhanced kinetics and changed mechanisms
Vaidhyanathan B, Singh AP, Agrawal DK, Shrout TR, Roy R, Ganguly S |
| 1203 - 1208 |
Preparation of hydroxyapatite lathlike particles using high-speed dispersing equipment
Koumoulidis GC, Vaimakis TC, Sdoukos AT, Boukos NK, Trapalis CC |
| 1209 - 1216 |
Synthesis of dense TIB2-TIN nanocrystalline composites through mechanical and field activation
Lee JW, Munir ZA, Shibuya M, Ohyanagi M |
| 1217 - 1224 |
Dynamic rheology of agar cel based aqueous binders
Labropoulos KC, Rangarajan S, Niesz DE, Danforth SC |
| 1225 - 1230 |
Mechanical-activation-triggered gibbsite-to-boehmite transition and activation-derived alumina powders
Yong CC, Wang J |
| 1231 - 1235 |
Effect of acrylic-styrene copolymer chemical structure on the properties of ceramic tapes obtained by tape casting
Szafran M, Rokicki G |
| 1236 - 1240 |
Conversion of oak to cellular silicon carbide ceramic by gas-phase reaction with silicon monoxide
Vogli E, Mukerji J, Hoffman C, Kladny R, Sieber H, Greil P |
| 1241 - 1249 |
Adsorption of hydroxypropyl methyl cellulose in an aqueous system containing multicomponent oxide particles
Sawyer CB, Reed JS |
| 1250 - 1256 |
Heterocoagulation in ionically stabilized mixed-oxide colloidal dispersions in ethanol
Wang GH, Nicholson PS |
| 1257 - 1259 |
Bimodal ceramic ink for continuous ink-jet printer plasma spraying
Blazdell P, Kuroda S |
| 1260 - 1264 |
Pressure-induced phase transformation of controlled-porosity Pb(Zr0.95Ti0.05)O-3 ceramics
Tuttle BA, Yang P, Gieske JH, Voigt JA, Scofield TW, Zeuch DH, Olson WR |
| 1265 - 1272 |
Effect of substitution of manganese for iron on the structure and electrical properties of yttrium ferrite
Cao XQ, Kim CS, Yoo HI |
| 1273 - 1280 |
Positive temperature coefficient of resistivity effect in highly donor-doped barium titanate
Makovec D, Ule N, Drofenik M |
| 1281 - 1285 |
Dielectric properties of the perovskite system Pb(Mg1/3Nb2/3)O-3-PbTiO3 modified by Pb(Mg1/3Ta2/3)O-3 and Pb(Zn1/3Nb2/3)O-3
Suh DH, Lee DH, Kim NK |
| 1286 - 1290 |
Influence of copper(II) oxide additions to zinc niobate microwave ceramics on sintering temperature and dielectric properties
Kim DW, Ko KH, Hong KS |
| 1291 - 1295 |
Effects of calcium substitution on the structural and microwave dielectric characteristics of [(Pb1-xCax)(1/2)La-1/2] (Mg1/2Nb1/2)O-3 ceramics
Liu CL, Wu TB |
| 1296 - 1300 |
Thickness alteration of grain-boundary amorphous films during creep of a multiphase silicon nitride ceramic
Jin Q, Wilkinson DS, Weatherly GC, Luecke WE, Wiederhorn SM |
| 1301 - 1308 |
Long-term behavior and application limits of plasma-sprayed zirconia thermal barrier coatings
Langjahr PA, Oberacker R, Hoffmann MJ |
| 1309 - 1314 |
Investigation of thermal shock in a high-temperature refractory ceramic: A fracture mechanics approach
Soboyejo WO, Mercer C, Schymanski J, van der Laan SR |
| 1315 - 1320 |
Calculating the thermal conductivity of heated powder compacts
Birnboim A, Olorunyolemi T, Carmel Y |
| 1321 - 1326 |
Development of surface compressive stresses in zirconia-alumina composites by an ion-exchange process
Lin GY, Virkar AV |
| 1327 - 1333 |
Effect of shear damage on the fracture behavior of carbon-carbon composites
Goto K, Hatta H, Takahashi H, Kawada H |
| 1334 - 1340 |
Influence of thermal conductivity and fracture toughness on the thermal shock resistance of alumina-silicon-carbide-whisker composites
Collin MIK, Rowcliffe DJ |
| 1341 - 1346 |
Habit modifications of SnO2 crystals in SnO2-Cu2O flux system in the presence of trivalent impurity cations
Kawamura F, Yasui I, Kamei M, Sunagawa I |
| 1347 - 1353 |
Relationship between microstructure and fracture toughness of toughened silicon carbide ceramics
Lee SG, Kim YW, Mitomo M |
| 1354 - 1360 |
Devitrification kinetics and mechanism of K2O-CaO-SrO-BaO-B2O3-SiO2 glass-ceramic
Jean JH, Fang YC, Dai SX, Wilcox DL |
| 1361 - 1368 |
Structure and chemistry of yttria-stabilized cubic-zirconia symmetric tilt grain boundaries
Dickey EC, Fan XD, Pennycook SJ |
| 1369 - 1373 |
Phase relations and volume changes of hafnia under high pressure and high temperature
Ohtaka O, Fukui H, Kunisada T, Fujisawa T, Funakoshi K, Utsumi W, Irifune T, Kuroda K, Kikegawa T |
| 1374 - 1378 |
Microstructure of a complex oxide, Er2Mn2/3Mo4/3O7, with a pyrochlore-related structure
Nakano H, Kamegashira N |
| 1379 - 1385 |
Three-dimensional simulation of grain growth in the presence of mobile pores
Tikare V, Miodownik MA, Holm EA |
| 1386 - 1388 |
Effect of surface impurities on the microstructure development during sintering of alumina
Sone TW, Han JH, Hong SH, Kim DY |
| 1389 - 1391 |
Synthesis of cerium alpha-SiAION with nuclei addition
Wang CM, Mitomo M, Xu FF, Hirosaki N, Bando Y |
| 1392 - 1394 |
Fabrication of textured alumina by high-temperature deformation
Yoshizawa Y, Toriyama M, Kanzaki S |
| 1395 - 1397 |
Fabrication of porous ceramics with unidirectionally aligned continuous pores
Zhang GJ, Yang JF, Ohji T |
| 1398 - 1400 |
Pore-boundary separation behavior during sintering of pure and Bi2O3-doped ZnO ceramics
Choi JH, Hwang NM, Kim DY |
