| 5013 - 5019 |
Strong and tough ZrB2 materials using a heterogeneous ceramic-metal layered architecture
Bai YH, Ma YY, Sun MY, Fan SW, Cheng LF |
| 5020 - 5024 |
The absorption and emission properties of highly transparent ZrO2-doped Yb3+: Y2O3 ceramics
Liu W, Jin LL, Wang SW |
| 5025 - 5032 |
1.8-13 mu m supercontinuum generation by pumping at normal dispersion regime of As-Se-Te glass fiber
Wu ZH, Yang L, Xu YS, Zhang PQ, Nie QH, Wang XS |
| 5033 - 5037 |
Interfacial optimization of SiC nanocomposites reinforced by SiC nanowires with high volume fraction
Ruan J, Yang JS, Dong SM, Yan JY, Zhang XY, Ding YS, Zhou HJ, Hu JB |
| 5038 - 5044 |
Electric field induced splitting of the preferred orientation in PMN-PT textured ceramics
Gollapudi S, Gao M, Li JF, Chang YF, Messing GL, Meyer RJ, Viehland D |
| 5045 - 5049 |
Fabrication and microstructure of perovskite CsPbCl3 nanocrystallized chalcogenide glass-ceramics
Yu MQ, Yu XL, Long NB, Lin CG |
| 5050 - 5062 |
Single crystal growth of CoTi2O5 by solid state reaction synthesis
Anderson KP, Giri AK, Vinci RP, Chan HM |
| 5063 - 5070 |
Synthesis and thermal stability of (Co,Ni)O solid solutions
Mohammadkhani S, Schaal E, Dolatabadi A, Moreau C, Davis B, Guay D, Roue L |
| 5071 - 5081 |
Enhanced photocatalytic reduction of Cr(VI) on silver nanoparticles modified mesoporous silicon under visible light
Faisal M, Harraz FA, Al-Salami AE, El-Toni AM, Almadiy AA, Khan A, Labis JP, Al-Sayari SA, Al-Assiri MS |
| 5082 - 5089 |
Strengthening three-dimensional printed ultra-light ceramic lattices
Mei H, Huang WZ, Zhao YZ, Cheng LF |
| 5090 - 5102 |
Synthetic fayalite Fe2SiO4 by kinetically controlled reaction between hematite and silicon carbide
Pinto RG, Yaremchenko AA, Baptista MF, Tarelho LAC, Frade JR |
| 5103 - 5116 |
The effects of nano-C-S-H with different polymer stabilizers on early cement hydration
Wang F, Kong XM, Wang DM, Wang QB |
| 5117 - 5126 |
Polymer-derived silicon nitride ceramics by digital light processing based additive manufacturing
Wang M, Xie C, He RJ, Ding GJ, Zhang KQ, Wang G, Fang DN |
| 5127 - 5137 |
Transparent CaF2 surface crystallized CaO-2B(2)O(3) glass possessing efficient photocatalytic and antibacterial properties
Singh G, Kumar S, Sharma M, Vaish R |
| 5138 - 5148 |
Molecular dynamics investigation of the fracture mechanism of a glass-ceramic containing cleavable crystals
Urata S, Takato Y, Maeda K |
| 5149 - 5163 |
Crystallization study of rare earth and molybdenum containing nuclear waste glass ceramics
McCloy JS, Riley BJ, Crum J, Marcial J, Reiser JT, Kruska K, Peterson JA, Neuville DR, Patil DS, Saleh M, Barnsley KE, Hanna JV |
| 5164 - 5171 |
Water diffusion in Zr-containing fiberglass materials at room temperature
Glazneva TS, Paukshtis EA, Sadovskaya EM, Larina TV, Bal'zhinimaev BS |
| 5172 - 5179 |
A novel chalcohalide fiber with high nonlinearity and low material zero-dispersion via extrusion
Zhao ZM, Chen P, Wang XS, Xue ZG, Tian YM, Jiao K, Wang XG, Peng XF, Zhang PQ, Shen X, Dai SX, Nie QH, Wang RP |
| 5180 - 5191 |
Phase transition and energy storage behavior of antiferroelectric PLZT thin films epitaxially deposited on SRO buffered STO single crystal substrates
Gao M, Tang X, Leung CM, Dai S, Li JF, Viehland DD |
| 5192 - 5202 |
Nanostructure-enhanced magnetoelectric/magnetostrictive properties and reduced losses in self-assembled epitaxial CuFe2O4-BiFeO3 layers on Pb(Mg1/3Nb2/3)O-3-33at%PbTiO3 crystals
Tang X, Leung CM, Gao M, Winkler C, Luo HS, Li JF, Viehland D |
| 5203 - 5212 |
Role of oxygen-vacancy in piezoelectric properties and fatigue behavior of (Bi0.5Na0.5)(0.93)Ba0.07Ti1+xO3 ceramics
Jia XR, Zhang JJ, Wang LJ, Wang JY, Du HW, Yao YX, Ren LL, Wen F, Zheng P |
| 5213 - 5222 |
Study on structure, microstructure and microwave dielectric characteristics of CaV2O6 and (Ca0.95M0.05)V2O6 (M=Zn, Ba) ceramics
Pirvaram A, Taheri-Nassaj E, Taghipour-Armaki H, Lu WZ, Lei W, Bafrooei HB |
| 5223 - 5233 |
Insight into luminescent properties, energy transfer and thermal stability of NaBa4(AlB4O9)(2)Cl-3:Ce3+, Tb3+ phosphors
Zhang WL, Liang YJ, Zhu YL, Liu SQ, Li HR, Lei W |
| 5234 - 5242 |
Enhanced spontaneous polarization in double perovskite Bi2FeCrO6 films
Meng DH, Xiao YS, He HC, Liao YL, Zhang HW, Zhai JY, Chen ZH, Martin LW, Bai FM |
| 5243 - 5252 |
Luminescence and electrical properties of Eu-modified Bi0.5Na0.5TiO3 multifunctional ceramics
Lun MM, Wang W, Xing ZF, Wan Z, Wu WY, Song HZ, Wang YZ, Li W, Chu BL, He QY |
| 5253 - 5261 |
Enhancement of energy storage density in antiferroelectric PbZrO3 films via the incorporation of gold nanoparticles
Li YZ, Wang ZJ, Bai Y, Liu W, Zhang ZD |
| 5262 - 5270 |
Intrinsic origin of enhanced piezoelectricity in alkali niobate-based lead-free ceramics
Tan Z, Peng YT, An J, Zhang QM, Zhu JG |
| 5271 - 5283 |
Influence of atmospheres on the dielectric properties of calcium copper titanate ceramics
Samarakoon DP, Govindaraju N, Singh RN |
| 5284 - 5294 |
Sr-induced color-tunable and thermal stability enhancing in the phosphor (Ba1-xSrx)(9)Lu2Si6O24:Eu2+ for solid-state lighting
Dong RJ, Zou HF, Zhang XT, An ZC, Zhou XQ, Zheng KY, Sheng Y, Shi Z, Song YH |
| 5295 - 5304 |
The effect of Fe-acceptor doping on the electrical properties of Na1/2Bi1/2TiO3 and 0.94 (Na1/2Bi1/2)TiO3-0.06 BaTiO3
Steiner S, Seo IT, Ren PR, Li M, Keeble DJ, Fromling T |
| 5305 - 5315 |
Interface evolution of a C/ZnO absorption agent annealed at elevated temperature for tunable electromagnetic properties
Li MH, Yin XW, Xu HL, Li XL, Cheng LF, Zhang LT |
| 5316 - 5327 |
A wide temperature insensitive piezoceramics for high-temperature energy harvesting
Zhao HY, Hou YD, Yu XL, Fu J, Zheng MP, Zhu MK |
| 5328 - 5341 |
The effect of imprint on remanent piezoelectric properties and ferroelectric aging of PbZr0.52Ti0.48O3 thin films
Akkopru-Akgun B, Zhu WL, Lanagan MT, Trolier-McKinstry S |
| 5342 - 5352 |
Preparation of rGO/AgCl QDs and its enhanced photoelectrocatalytic performance for the degradation of Tetracycline
Kadeer K, Reheman A, Maimaitizi H, Talifu D, Tursun Y, Abulizi A |
| 5353 - 5364 |
Near-ultraviolet light-induced dazzling red emission in CaGd2(MoO4)(4):2xSm(3+) compounds for phosphor-converted WLEDs
Zhou LH, Du P, Yu JS |
| 5365 - 5374 |
Intrinsic dielectric properties of columbite ZnNb2O6 ceramics studied by P-V-L bond theory and Infrared spectroscopy
Yang HY, Zhang SR, Yang HC, Yuan Y, Li EZ |
| 5375 - 5385 |
Understanding the atomic and electronic structures origin of defect luminescence of CdSe quantum dots in glass matrix
Li WK, Li N, Liu C, Greaves GN, Ong WJ, Zhao XJ |
| 5386 - 5400 |
Oxygen vacancies and pseudo Jahn-Teller destabilization in cesium-doped hexagonal tungsten bronzes
Okada M, Ono K, Yoshio S, Fukuyama H, Adachi K |
| 5401 - 5414 |
Influence of PbO stoichiometry on the properties of PZT ceramics and multilayer actuators
Oldenkotte M, Kungl H, Eichel RA, Schonau KA, Kuhlein M, Bernard T, Hoffmann MJ, Hinterstein M |
| 5415 - 5423 |
Preparation and photocatalytic performance of TiO2/PbTiO3 fiber composite enhanced by external force induced piezoelectric field
Bai Y, Zhao JZ, Li YY, Lv ZL, Lu K |
| 5424 - 5431 |
High-temperature multilayer actuators based on CuO added BiScO3-PbTiO3 piezoceramics and Ag electrodes
Qaiser MA, Ma XZ, Ma RT, Ali W, Xu XJ, Yuan GL, Chen L |
| 5432 - 5442 |
Crystal distortion and electrical properties of Ce-doped BIT-based piezoelectric ceramics
Nie R, Yuan J, Chen Q, Xing J, Zhu JG, Zhang W |
| 5443 - 5453 |
Ca2Na2La6(SiO4)(4)(PO4)(2)O: Eu2+/Eu3+: A visual dual-emitting fluorescent ratiometric temperature sensor
Zhou XF, Geng WY, Ding JY, Zhao ZY, Wang YH |
| 5454 - 5464 |
The surface mechanism for the flexoelectric response in sodium bismuth titanate-based ferroelectric ceramics
Zhou WF, Hou Y, Chen P, Zhang HF, Chu BJ |
| 5465 - 5470 |
A multicolor persistent luminescent phosphor Sr2Ga2GeO7:Pr3+ for dynamic anticounterfeiting
Ji LP, Zhou JY, Zhang JC, Zhang ZY, Ma ZD, Wang WX, Li HH, Wu CF |
| 5471 - 5483 |
Y4.67Si3O13-based phosphors: Structure, morphology and upconversion luminescence for optical thermometry
Zhang J, Chen Y |
| 5484 - 5493 |
0D CoP cocatalyst/2D g-C3N4 nanosheets: An efficient photocatalyst for promoting photocatalytic hydrogen evolution
Han CC, Zhang T, Cai QJ, Ma CH, Tong ZF, Liu ZF |
| 5494 - 5502 |
Microwave dielectric properties and thermally stimulated depolarization of Al-doped Ba-4(Sm,Nd)(9.33)Ti18O54 ceramics
Guo WJ, Zhang J, Luo Y, Yue ZX, Li LT |
| 5503 - 5513 |
Ultrahigh-strength alumina ceramic foams via gelation of foamed boehmite sol
Chen YG, Huo WL, Zhang XY, Lu YJ, Yan S, Liu JJ, Gan K, Yang JL |
| 5514 - 5523 |
First principles predicting enhanced ductility of boride carbide through magnesium microalloying
Tang B, He Y, Goddard WA, An Q |
| 5524 - 5534 |
A rate-dependent constitutive model for brittle granular materials based on breakage mechanics
Cil MB, Hurley RC, Graham-Brady L |
| 5535 - 5544 |
3D microstructure and crack pathways of toughened CaO-Al2O3-SiO2 glass by precipitation of hexagonal CaAl2Si2O8 crystal
Maeda K, Iwasaki K, Urata S, Akatsuka K, Yasumori A |
| 5545 - 5554 |
Brownmillerite hydration in the presence of gypsum: The effect of Al/Fe ratio and sulfate ions
Huang X, Wang FZ, Hu SG, Lu Y, Rao MJ, Mu YD |
| 5555 - 5564 |
Effect of hydrothermal corrosion on the fracture strength of SiC layer in tristructural-isotropic fuel particles
Xie X, Liu B, Guo Y, Liu RZ, Zhao XF, Ni N, Guo FW, Xiao P |
| 5565 - 5575 |
High temperature mechanical behavior of porous ceria and ceria-based solid-oxide fuel cells
Stanley P, Hays T, Langdo T, Gore C, Wachsman ED |
| 5576 - 5586 |
Novel design of alumina foams with three-dimensional reticular architecture for effective high-temperature particulate matter capture
Liu JJ, Ren B, Chen YG, Lu YJ, Zhang SH, Rong YD, Yang JL |
| 5587 - 5602 |
Crystallization kinetics for SiO2 formed during SiC fiber oxidation in steam
Hay RS |
| 5603 - 5612 |
Cation deficiency associated with the chemical exfoliation of lithium cobalt oxide
Pachuta KG, Pentzer EB, Sehirlioglu A |
| 5613 - 5619 |
Enhanced thermal stability by introducing TiN diffusion barrier layer between W and SiC
Cheng P, DelaCruz S, Tsai DS, Wang ZT, Carraro C, Maboudian R |
| 5620 - 5631 |
Simultaneous three-dimensional elemental mapping of Hollandite and Pyrochlore material phases in ceramic waste form materials
Damian PJC, Cocco AP, Wrubel JA, Hong T, Bordia RK, Liu YJ, Pianetta P, Amoroso JW, Brinkman KS, Chiu WKS |
| 5632 - 5644 |
Experimental determination of phase equilibria in the CaO-BaO-SiO2-12 mol pct. Al2O3-13 mol pct. MgO system at 1573 K and 1623 K
Wang ZJ, Sohn I |
| 5645 - 5655 |
Evaluation of rare-earth element dopants (Sm and Er) on ablation resistance of ZrB2/SiC-sintered billets
Pena AA, Vernon JP, Trice RW |
| 5656 - 5667 |
Microstructure and mechanical property of high growth rate SiC via continuous hot-wire CVD
Liu S, Yang YQ, Luo X, Huang B, Jin N, Kou ZD |
| 5668 - 5678 |
Fine-grained 3C-SiC thick films prepared via hybrid laser chemical vapor deposition
Lai YF, Cheng H, Jia ZL, Li QZ, Yang MJ, Zhang S, Han MX, Tu R, Goto T, Zhang LM |
| 5679 - 5690 |
Microstructures, properties, and applications of laser sintered 17-4PH stainless steel
Irrinki H, Nath SD, Alhofors M, Stitzel J, Gulsoy O, Atre SV |
| 5691 - 5698 |
Novel multiuse liquid phase promoter for PM components
Galan-Salazar A, Campos M, Torralba JM |
