1 - 4 |
Low voltage operated, sol-gel derived oxide thin film transistor based on high-k Gd2O3 gate dielectric Choi S, Park BY, Jeong S, Lee JY, Ryu BH, Jung HK |
5 - 10 |
Fabrication of vertically aligned CuInSe2 nanorod arrays by template-assisted mechanical approach Date MK, Chiu BC, Liu CH, Chen YZ, Wang YC, Tuan HY, Chueh YL |
11 - 16 |
Synthesis and characterization of novel gamma-induced porous PHEMA-IL composites Casimiro MH, Corvo MC, Ramos AM, Cabrita EJ, Ramos AM, Ferreira LM |
17 - 28 |
Synthesis and characterization of Co-Fe nanoparticles supported on mesoporous silicas Braganca LFFPG, Avillez RR, Moreira CR, da Silva MIP |
29 - 37 |
Stable water-soluble iron oxide nanoparticles using Tiron Korpany KV, Habib F, Murugesu M, Blum AS |
38 - 48 |
Sequence of deformation and cracking behaviours of Gallium-Arsenide during nano-scratching Wasmer K, Parlinska-Wojtan M, Graca S, Michler J |
49 - 62 |
Degradation behaviour of sputtered Co-Al coatings on superalloy Rahman A, Chawla V, Jayaganthan R, Chandra R, Ambardar R |
63 - 71 |
Highly toughened polypropylene/ethylene-propylene-diene monomer/zinc dimethacrylate ternary blends prepared via peroxide-induced dynamic vulcanization Chen YK, Xu CH, Cao LM, Cao XD |
72 - 77 |
Effects of illumination on electrical parameters of Ag/n-CdO/p-Si diode Karatas S, Yakuphanoglu F |
78 - 85 |
The morphology of limestone-based pellets prepared with kaolin-based binders Ridha FN, Manovic V, Anthony EJ, Macchi A |
86 - 94 |
Phase transformation and mechanical behavior of thermomechanically controlled processed high strength ordnance steel Bandyopadhyay PS, Ghosh SK, Kundu S, Chatterjee S |
95 - 101 |
The relationship among microstructure evolution, mechanical property and in situ reaction mechanisms in preparing Cu-1.6wt%TiB2 alloys Guo MX, Wang MP |
102 - 107 |
Influence of structural ordering on electrical conductivity of nanostructured manganese zinc ferrite Sivakumar N |
108 - 113 |
Effect of doping cobalt on the micro-morphology and electrochemical properties of birnessite MnO2 Wang GL, Shao GJ, Du JP, Zhang Y, Ma ZP |
114 - 123 |
Influence of surface modification on the apatite formation and corrosion behavior of Ti and Ti-15Mo alloy for biomedical applications Sasikumar Y, Rajendran N |
124 - 130 |
Ultralow-temperature hydrothermal synthesis of Zn-Mn spinel nanocrystals: Its defect spinel of lambda-MnO2 prepared by a soft chemical method Xue L, Wu ZS, Ge CH, Zhang XD |
131 - 139 |
Synthesis of sulphonated mesoporous phenolic resins and their application in esterification and asymmetric aldol reactions Muylaert I, Verberckmoes A, Spileers J, Demuynck A, Peng L, De Clippel F, Sels B, Van Der Voort P |
140 - 145 |
Structure and electrical properties of (Bi0.5Na0.5)(0.94)Ba0.06TiO3-Bi-0.5(Na0.82K0.18)(0.5)TiO3-BiAlO3 lead free piezoelectric ceramics Fu P, Xu ZJ, Chu RQ, Li W, Wu XY, Zhao MJ |
146 - 153 |
Facile synthesis of carbon coated LiFePO4 nanocomposite with excellent electrochemical performance through in situ formed lithium stearate pyrolysis route Zhang QG, Peng TY, Zhan D, Hu XH, Zhu GZ |
154 - 161 |
Dynamics and diffusion mechanism in network forming liquid under high pressure: A new approach Hong NV, Ha NTT, Hung HV, Lan MT, Hung PK |
162 - 166 |
Crystal growth and characterization of Ho-doped Lu3Ga5O12 for 2 mu m laser Sun GH, Zhang QL, Yang HJ, Luo JQ, Sun DL, Gu CJ, Yin ST |
167 - 173 |
Template-free solvothermal synthesis of hierarchical boehmite hollow microspheres with strong affinity toward organic pollutants in water Cai WQ, Chen SG, Yu JG, Hu YZ, Dang CX, Ma SH |
174 - 178 |
Natural Fe3O4 nanoparticles embedded zinc-tellurite glasses: Polarizability and optical properties Widanarto W, Sahar MR, Ghoshal SK, Arifin R, Rohani MS, Hamzah K, Jandra M |
179 - 185 |
Synthesis, growth and characterization of pi conjugated organic nonlinear optical chalcone derivative Prabhu AN, Upadhyaya V, Jayarama A, Bhat KS |
186 - 191 |
Investigation on one-pot hydrothermal synthesis, structural and optical properties of ZnS quantum dots Jothi NSN, Joshi AG, Vijay RJ, Muthuvinayagam A, Sagayaraj P |
192 - 198 |
Analysis of the precipitation process of secondary phase MgNi2.5B2 and superconducting properties in Ni-doped MgB2 bulk Zhao Q, Liu YC, Cai Q |
199 - 203 |
Preparation, characterization and thermal stability of bentonite modified with bis-imidazolium salts Makhoukhi B, Villemin D, Didi MA |
204 - 208 |
Enhanced photoluminescence of Gd-0.94(P1-xVx)O-4:Eu-0.06 red-emitting (0 <= x <= 1.0) phosphors Park K, Kim KY, Shinde KN |
209 - 214 |
Hyperfine interactions and structural features of Fe-44Co-6Mo (wt.%) nanostructured powders Moumeni H, Nemamcha A, Alleg S, Greneche JM |
215 - 224 |
Mechanical properties and bonding structure of boron carbon nitride films synthesized by dual ion beam sputtering Zhou F, Wang QZ, Yue B, Wu XM, Zhuge LJ, Cheng XN |
225 - 229 |
Electronic structures and optical properties of GaN nanotubes with Mg-Ga-O-N co-doping Yang M, Shi JJ, Zhang M, Zhang S, Bao ZQ, Luo SJ, Zhou TC, Zhu TC, Li X, Li J |
230 - 237 |
Effects of modified Clay on the morphology and thermal stability of PMMA/clay nanocomposites Tsai TY, Lin MJ, Chuang YC, Chou PC |
238 - 244 |
Thermoelectric properties of graphene nanosheets-modified polyaniline hybrid nanocomposites by an in situ chemical polymerization Lu Y, Song Y, Wang FP |
245 - 252 |
Fabrication of titania coatings on stainless steel via laser-induced deposition of colloidal titanium oxide from sol-gel suspension Adraider Y, Pang YX, Sharp MC, Hodgson SN, Nabhani F, Al-Waidh A |
253 - 261 |
Superhydrophobic properties of cotton fabrics functionalized with ZnO by electroless deposition Preda N, Enculescu M, Zgura I, Socol M, Matei E, Vasilache V, Enculescu I |
262 - 269 |
Piezo and photoelectric coupled nanogenerator using CdSe quantum dots incorporated ZnO nanowires in ITO/ZnO NW/Si structure Kathalingam A, Valanarasu S, Senthilkumar V, Rhee JK |
270 - 276 |
The effect of aggregation on the nonlinear optical absorption performance of indium and gallium phthalocyanines in a solution and co-polymer host Tekin S, Yaglioglu HG, Elmali A, Kurum U, Yanik H, Tekdas DA, Durmus M, Ahsen V |
277 - 285 |
The waterborne polyurethane dispersions based on polycarbonate diol: Effect of ionic content Cakic SM, Spirkova M, Ristic IS, B-Simendic JK, M-Cincovic M, Poreba R |
286 - 294 |
Polymer/surfactant assisted self-assembly of nanoparticles into Langmuir-Blodgett films Alejo T, Merchan MD, Velazquez MM, Perez-Hernandez JA |
295 - 302 |
New versatile polydopamine coated functionalized magnetic nanoparticles Mrowczynski R, Turcu R, Leostean C, Scheidt HA, Liebscher J |
303 - 312 |
Acrylonitrile-capped poly(propyleneimine) dendrimer curing agent for epoxy resins: Model-free isoconversional curing kinetics, thermal decomposition and mechanical properties Wan JT, Li C, Bu ZY, Fan H, Li BG |
313 - 318 |
Electrochemical performance of LiFePO4/Si composites as cathode material for lithium ion batteries Lin YB, Lin Y, Zhou T, Zhao GY, Huang YD, Yang YM, Huang ZG |
319 - 326 |
Polyaniline/Vanadium oxide composites: An effective control in morphology by varying reactant concentrations Goswami S, Maiti UN, Maiti S, Mitra MK, Chattopadhyay KK |
327 - 332 |
Characterization of chemically sprayed CdO films on borate and phosphate glass substrates produced by melt-quenching technique Colak SC, Erdogan B, Akyuz I, Atay F |
333 - 341 |
Functional polyaniline nanofibre mats for human adipose-derived stem cell proliferation and adhesion Rahman NA, Feisst V, Dickinson ME, Malmstrom J, Dunbar PR, Travas-Sejdic J |
342 - 349 |
Joining highly conductive and oxidation resistant silver-based electrode materials to silicon for high temperature thermoelectric energy conversions Gan YX, Dynys FW |
350 - 357 |
Preparation of surface-silvered graphene-CNTs/polyimide hybrid films: Processing, morphology and properties Zheng ZX, Wang ZH, Feng QL, Zhang FY, Du YL, Wang CM |
358 - 365 |
Effects of cobalt doping on the microstructure, complex impedance and activation energy in 0.2PZN-0.8PZT ceramics Zheng MP, Hou YD, Fu J, Fan XW, Zhu MK, Yan H |
366 - 374 |
Gas sensing characteristics of MEMS gas sensor arrays in binary mixed-gas system Kim BJ, Kim JS |
375 - 383 |
Electrical and dielectric properties of sol-gel derived mullite doped with transition metals Roy D, Bagchi B, Das S, Nandy P |
384 - 391 |
Thin film model systems of ZrO2 and Y2O3 as templates for potential industrial applications investigated by means of electron microscopy Thalinger R, Pollach MS, Klotzer B, Penner S |
392 - 398 |
Electrical and optical properties of copper-complexes thin films grown by the vacuum thermal evaporation technique Sanchez-Vergara ME, Rivera M, Alonso-Huitron JC, Rodriguez A, Alvarez-Bada JR |
399 - 404 |
Tailored temperature window of CuOx/WOx-ZrO2 for NOx reduction via adjusting the calcination temperature of WOx-ZrO2 Si ZC, Wu XD, Weng D, Ma ZR, Ma J |
405 - 415 |
Effect of process parameters on surface oxides on chromium-alloyed steel powder during sintering Chasoglou D, Hryha E, Nyborg L |