347 - 350 |
Assembling of nanoparticles using ice crystals Mukai SR, Mitani K, Murata S, Nishihara H, Tamon H |
351 - 355 |
Fabrication and growth mechanism of carbon nanospheres by chemical vapor deposition Tian F, He CN |
356 - 359 |
Research on the direct doping effect of silicon on cubic boron nitride ceramics by UV-VIS diffuse reflectance Wang PF, Li ZH, Zhu YM |
360 - 362 |
Enhanced photoluminescence of spray pyrolysis processed YBO3:Eu3+ for PDP application Park K, Nam SW |
363 - 366 |
Synthesis of hollow ZnO microspheres and its novel UV absorption Jin DL, Liao N, Xu XQ, Yu XJ, Wang LN, Wang LC |
367 - 371 |
Effect of DLC surface texturing on friction and wear during lubricated sliding Chouquet C, Gavillet J, Ducros C, Sanchette F |
372 - 377 |
Clay based polymeric composites: Preparation and quality characterization Aloisi GG, Elisei F, Nocchetti M, Camino G, Frache A, Costantino U, Latterini L |
378 - 384 |
Facile route to synthesis alpha-Fe2O3/Pt urchin-like composites and their magnetic and electrocatalytic properties Chen YC, Zhang K, Min YL, Zhang YG, Zhang R |
385 - 389 |
The structural and magnetic properties of cobalt ferrite nanoparticles formed in situ in silica matrix Xiao SH, Luo K, Zhang L |
390 - 395 |
Enhanced electrocatalytic performance for isopropanol oxidation on Pd-Au nanoparticles dispersed on poly(p-phenylene) prepared from biphenyl Zhou WQ, Wang CY, Xu JK, Du YK, Yang P |
396 - 400 |
Trimethylamine sensing properties of CdO-Fe2O3 nano-materials prepared using co-precipitation method in the presence of PEG400 Chu XF, Liang SM, Chen TY, Zhang QF |
401 - 406 |
Superconformal filling of 41 nm trenches with Cu electroless deposition on Au-activated self-assembled monolayer Han WK, Hwang GH, Hong SJ, An HH, Yoon CS, Kim JH, Lee MJ, Hong G, Park KS, Kang SG |
407 - 416 |
Influence of solution-annealing and stress-relieving on the pitting corrosion resistance of modified 316N SS weld metals: A study using EN technique Pujar MG, Parvathavarthini N, Dayal RK |
417 - 420 |
Effect of pre-calcination process on thermal stability of mesoporous titania synthesized by nanocasting of nonsurfactant-templated mesoporous silica Lee DW, Yu CY, Lee KH |
421 - 426 |
Rattle-type Au@TiO2 hollow microspheres with multiple nanocores and porous shells and their structurally enhanced catalysis Kong LC, Duan GT, Zuo GM, Cai WP, Cheng ZX |
427 - 433 |
Sol-gel synthesis and characterization of mesoporous iron-titanium mixed oxide for catalytic application Parida KM, Pradhan GK |
434 - 438 |
Structural and transport properties of stoichiometric and Cu2+-doped magnetite: Fe3-xCuxO4 Varshney D, Yogi A |
439 - 449 |
Polymer complexes. XLXI. Supramolecular spectral studies on metal-ligand bonding of novel rhodanine sulphadrugs hydrazone El-Sonbati AZ, Diab MA, El-Halawany MM, Salam NE |
450 - 455 |
Structural, optical and magnetic properties of nanoparticles of ZnO:Ni-DMS prepared by sol-gel method Elilarassi R, Chandrasekaran G |
456 - 462 |
Corrosion behavior of copper thin films deposited by EB-PVD technique on thermally grown silicon dioxide and glass in hydrochloric acid media Saremi M, Yeganeh M |
463 - 470 |
A drug-loaded gel based on polyelectrolyte complexes of poly (acrylic acid) with poly (vinylpyrrolidone) and chitosan Jin SP, Liu MZ, Chen SL, Gao CM |
471 - 480 |
On the crystallization behavior of the nano-silica filled PEEK composites Kuo MC, Kuo JS, Yang MH, Huang JC |
481 - 486 |
Preparation, flame retardancy and thermal behavior of a novel UV-curable coating containing phosphorus and nitrogen Xing WY, Song L, Lv P, Jie GX, Wang X, Lv XQ, Hu YA |
487 - 493 |
Size controlled Fe nanoparticles through polyol process and their magnetic properties Joseyphus RJ, Shinoda K, Kodama D, Jeyadevan B |
494 - 497 |
Titanate nanotubes as superior adsorbents for removal of lead(II) ions from water Nie XT, Teh YL |
498 - 501 |
HCl-assisted pyrolysis of PdCl2 to immobilize palladium nanoparticles on multi-walled carbon nanotubes Ding KQ, Yang GK |
502 - 506 |
Electrical and photoluminescent behaviors of La(OH)(3) nanobelts doped with Ce3+ and Er3+ Zuo ZY, Liu D, Liu J, Liu H, Qin SB, Zheng FF |
507 - 509 |
Dry gel conversion synthesis of SAPO-34 nanocrystals Hirota Y, Murata K, Tanaka S, Nishiyama N, Egashira Y, Ueyama K |
510 - 515 |
Preparation and effects of Mg-doping on the electrochemical properties of spinel Li4Ti5O12 as anode material for lithium ion battery Ji SZ, Zhang JY, Wang WW, Huang Y, Feng ZR, Zhang ZT, Tang ZL |
516 - 520 |
Synthesis and characterization of plate-like ceria particles for cosmetic application Minamidate Y, Yin S, Sato T |
521 - 528 |
Electrochemical investigation of surface reactions for chemically promoted chemical mechanical polishing of TaN in tartaric acid solutions Janjam SVSB, Peethala BC, Zheng JP, Babu SV, Roy D |
529 - 533 |
Nanosintering mechanism of MgAl2O4 transparent ceramics under high pressure Zou YT, He DW, Wei XK, Yu RC, Lu TC, Chang XH, Wang SM, Lei L |
534 - 539 |
Transformation of novel morphologies and polymorphs of CaCO3 crystals induced by the anionic surfactant SDS Chen ZY, Li CF, Yang QQ, Nan ZD |
540 - 545 |
Hexadecylamine capped silver and gold nanoparticles: Comparative study on formation and self-organization Mishra T, Sahu RK, Lim SH, Salamanca-Riba LG, Bhattacharjee S |
546 - 550 |
Shape and sizes of micelles in nematic-calamitic and nematic-discotic mesophases: Sodium lauryl sulphate/water/decanol lyotropic system Nesrullajev A |
551 - 556 |
Effects of calcination temperature and solution pH value on the structural and magnetic properties of Ba2Co2Fe12O22 ferrite via EDTA-complexing process Zhang CX, Shi JS, Yang XJ, De LL, Wang X |
557 - 562 |
Cobalt and KNO3 supported on alumina catalysts for diesel soot combustion Grzona CB, Lick ID, Castellon ER, Ponzi MI, Ponzi EN |
563 - 568 |
Catalytic and photocatalytic activity of lightly doped catalysts M:ZnO (M = Cu, Mn) Donkova B, Dimitrov D, Kostadinov M, Mitkova E, Mehandjiev D |
569 - 580 |
Size effects of modifying cations on the structure and elastic properties of Na2O-MO-SiO2 glasses (M = Mg, Ca, Sr, Ba) Lin CC, Chen SF, Liu LG, Li CC |
581 - 584 |
Synthesis of PbSe/SiO2 and PbTe/SiO2 nanocomposites using the sol-gel process Bajaj P, Woodruff E, Moore JT |
585 - 594 |
Preparation and characterization of antimicrobial Ce-doped ZnO nanoparticles for photocatalytic detoxification of cyanide Karunakaran C, Gomathisankar P, Manikandan G |
595 - 600 |
Anatase TiO2 hollow spheres embedded TiO2 nanocrystalline photoanode for dye-sensitized solar cells Zhang YW, Zhang J, Wang PQ, Yang GT, Sun QA, Zheng J, Zhu YJ |
601 - 605 |
VUV photoluminescence characteristics of (Y,Gd)VO4:Eu,Zn phosphors produced by ultrasonic spray pyrolysis Park K, Nam SW |
606 - 609 |
CTAB-assisted hydrothermal synthesis of nano-sized tetragonal zirconium dioxide Zhang J, Song BC, Peng WT, Feng YL, Xu B |
610 - 613 |
Al-27 MAS NMR spectroscopic identification of reaction intermediates in the carbothermal reduction and nitridation of alumina Jung WS, Chae SA |
614 - 619 |
Synthesis of tungsten oxide thin film by liquid phase deposition Deki S, Beleke AB, Kotani Y, Mizuhata M |
620 - 624 |
Synthesis and properties of chemical bath deposited ZnS multilayer films Allouche NK, Ben Nasr T, Kamoun NT, Guasch C |
625 - 628 |
Ultrasonic-assisted ac etching of aluminum foils for electrolytic capacitor electrodes with enhanced capacitance Hou ZH, Zeng JH, Chen JJ, Liao SJ |
629 - 633 |
Interfacial reactions between Sn-8Zn-3Bi-xNi lead-free solders and Cu substrate during isothermal aging Liu LJ, Zhou W, Li BL, Wu P |
634 - 638 |
Microstructure and field emission characteristics of ZnO nanoneedles grown by physical vapor deposition George A, Kumari P, Soin N, Roy SS, McLaughlin JA |
639 - 643 |
A model for thermal conductivity of nanofluids Emami-Meibodi M, Vafaie-Sefti M, Rashidi AM, Amrollahi A, Tabasi M, Sid-Kalal H |
644 - 648 |
New insights on the mechanism of Fe3O4 nanoparticles formation by electrospinning of FeCl3/PVC solutions Tura V, Mangalagiu II |
649 - 657 |
Microstructural and mechanical properties of titanium particulate reinforced magnesium composite materials Umeda J, Kawakami M, Kondoh K, Ayman ES, Imai H |
658 - 665 |
Surface energy calculation of alkali metals with the empirical electron surface model Fu BQ, Liu W, Li ZL |
666 - 677 |
Investigation of adsorption of isoniazid derivatives at mild steel/hydrochloric acid interface: Electrochemical and weight loss methods Singh AK, Quraishi MA |
678 - 684 |
Defect-induced reversible ferromagnetism in Fe-doped ZnO semiconductor: An electronic structure and magnetization study Samariya A, Singhal RK, Kumar S, Xing YT, Alzamora M, Dolia SN, Deshpande UP, Shripathi T, Saitovitch EB |
685 - 689 |
WORM memory devices based on conformation change of a PVK derivative with a rigid spacer in side chain Liu YH, Li NJ, Xia XW, Xu QF, Ge JF, Lu JM |
690 - 694 |
A novel counter electrode based on mesoporous carbon for dye-sensitized solar cell Wang GQ, Wang LA, Xing W, Zhuo SP |
695 - 699 |
A simple chemical co-precipitation/calcination route for the synthesis of simulated synroc-B and synroc-C powders Potdar HS, Vijayanand S, Mohaideen KK, Patil KR, Joy PA, Madhavan RR, Kutty KVG, Ambashta RD, Wattal PK |
700 - 705 |
Electrochemical characteristics of B4C or BN added MnO2 cathode material for alkaline batteries Minakshi M, Blackford MG |
706 - 713 |
Adsorption of single-strand alkylammonium salts on bentonite, surface properties of the modified clay and polymer nanocomposites formation by a two-roll mill Hoshino J, Limpanart S, Khunthon S, Osotchan T, Traiphol R, Srikhirin T |
714 - 718 |
Influence of P-doping on the morphologies and photoluminescence properties of LaVO4:Tb3+ nanostructures Zhang SA, Wang L, Peng HR, Li GC, Chen KZ |
719 - 722 |
Cobalt hydroxide film on Pt as co-catalyst for oxidation of polyhydric alcohols in alkaline medium Das D, Das K |
723 - 726 |
The interface structures formation and their effectiveness for enhancement of the phase stability in Ti/Si binary oxide Zhang WW, Yao SY, Han Y, Sun HQ, Yin YS |
727 - 730 |
Sintering behavior and microwave dielectric properties of Ba6-3xNd8+2xTi18O54 (x=2/3) ceramics coated by H3BO3-TEOS sol-gel Pang LX, Wang H, Zhou D, Liu WH |
731 - 736 |
Fabrication and high temperature oxidation resistance of ZrO2/Al2O3 micro-laminated coatings on stainless steel Gao JG, He YD, Wang DR |
737 - 741 |
Synthesis, structure and magnetic properties of the Lu2O3-CoO mixed system Ben Farhat L, Amami M, Hlil EK, Ben Hassen R |
742 - 746 |
Synthesis, characterization, photo and physicochemical properties of 11-mercaptoundecanoic acid and tetraaniline capped CdS quantum dots Chen WY, Ghule AV, Chang JY, Chen BJ, Liu JY, Tzing SH, Ling YC |
747 - 751 |
Influence of Pb-rich phases of precursor powder on microstructural evolution in the silver-sheathed (Bi,Pb)(2)Sr2Ca2Cu3Ox superconducting tapes Chen XP, Grivel JC, Li MY, Liu Q, Han Z, Andersen NH, Homeyer J |
752 - 755 |
Anomalous hysteresis studies in Bi-2223/Bi-2212 superconductors by non-resonant microwave absorption (NRMA) with special reference to energy stabilized Josephson (ESJ) fluxons Padam GK, Arora NK, Ekbote SN |
756 - 760 |
Molecular hybrids of CdSe semiconductor nanocrystals with terthiophene carboxylic acid or its polymeric analogue Pokrop R, Pamula K, Deja-Drogomirecka S, Zagorska M, Reiss P, Louarn G, Chandezon F, Pron A |
761 - 766 |
Investigation of carbon corrosion in polymer electrolyte fuel cells using steam etching Wang MX, Liu Q, Sun HF, Ogbeifun N, Xu F, Stach EA, Xie JA |
767 - 771 |
Influence of iron ions on the structural and magnetic properties of some zinc-phosphate glasses Pascuta P, Borodi G, Popa A, Dan V, Culea E |
772 - 775 |
Temperature dependence on the electrical properties of Ba(Ti0.90Zr0.10)O-3:2V ceramics Moura F, Simoes AZ, Paskocimas CA, Zaghete MA, Varela JA, Longo E |
776 - 785 |
Synthesis and electrical, spectroscopic and nonlinear optical properties of cobalt molecular materials obtained from PcCo(CN)L (L = ethylenediamine, 1,4-diaminebutane, 1,12-diaminododecane and 2,6-diamineanthraquinone) Morales-Saavedra OG, Sanchez-Vergara ME, Rodriguez-Rosales AA, Ortega-Martinez R, Ortiz-Rebollo A, Frontana-Uribe BA, Garcia-Montalvo V |
786 - 790 |
Dielectric properties of calcium doped BaTi0.85Sn0.15O3: A diffuse phase transition Singh S, Singh P, Parkash O, Kumar D |
791 - 794 |
Study of dimension dependent diffusion coefficient of titanium dioxide nanoparticles Mishra S, Gupta SK, Jha PK, Pratap A |
795 - 800 |
Simple synthesis and characterization of highly ordered sisal-like cobalt superstructures An ZG, Zhang JJ, Pan SL |
801 - 805 |
Photo-oxidation of ethylene in gas phase and methanol and formic acid in liquid phase on synthesized TiO2 and Au/TiO2 catalysts Belapurkar AD, Kamble VS, Dey GR |
806 - 810 |
Upconversion emission enhancement in silica-coated Gd2O3:Tm3+, Yb3+ nanocrystals by incorporation of Li+ ion Sun Q, Zhao H, Chen XQ, Wang FP, Cai W, Jiang ZH |
811 - 815 |
Effect of hydrothermal reaction temperature on growth, photoluminescence and photoelectrochemical properties of ZnO nanorod arrays Qin Z, Liao QL, Huang YH, Tang LD, Zhang XH, Zhang Y |
816 - 820 |
Self-combustion synthesis and oxygen storage properties of mesoporous gadolinia-doped ceria nanotubes Yang T, Xia DG |
821 - 828 |
Elaboration of nickel nanoparticles by modified polyol process and their spark plasma sintering, characterization and magnetic properties of the nanoparticles and the dense nano-structured material Omrani AD, Bousnina MA, Smiri LS, Taibi M, Leone P, Schoenstein F, Jouini N |
829 - 829 |
Nanomechanical properties of functionally graded composite coatings: Electrodeposited nickel dispersions containing silicon micro- and nanoparticles (vol 121, pg 497, 2010) Sohrabi A, Dolati A, Ghorbani M, Monfared A, Stroeve P |