| 351 - 355 |
Novel synthesis method of YAG: Ce3+ micron-sized powders and its luminescence properties
Ding X, Shi YR, Zhu G, Wang YH |
| 356 - 359 |
Optical second harmonic generation in a low-bandgap polymer
Vandendriessche S, Willot P, Valev VK, Koeckelberghs G, Verbiest T |
| 360 - 364 |
Influence of gallium on the surface properties of zinc based glass polyalkenoate cements
Alhalawani AMF, Placek L, Wren AW, Curran DJ, Boyd D, Towler MR |
| 365 - 370 |
New diketopyrrolopyrrole based D-A-D pi-conjugated molecules: Synthesis, optical, electrochemical, morphological and photovoltaic properties
Kozma E, Kotowski D, Galeotti F, Catellani M, Luzzati S, Bertini F |
| 371 - 374 |
Single step synthesis of chalcogenide nanoparticles Cu2ZnSnS4, Cu2FeSnS4 by thermal decomposition of metal precursors
Mokurala K, Bhargava P, Mallick S |
| 375 - 381 |
Effect of dysprosium substitution on electrical properties of SrBi4Ti4O15
Mamatha B, Sarah P |
| 382 - 389 |
Modification of bifunctional epoxy resin using CO2 fixation process and nanoclay
Khoshkish M, Bouhendi H, Vafayan M |
| 390 - 394 |
Solvothermal synthesis of chalcopyrite CuIn0.7Ga0.3Se2 nanoparticles and the studies on reaction mechanism and structure defects
Zhang L, Zhang WJ, Liu J, Ma Q, Ma XB, Wu RS, Song HY, Song DY, Zhang L, Zhang H |
| 395 - 402 |
The role of local structural distortions in the stabilisation of undoped nanocrystalline tetragonal zirconia
Dapiaggi M, Maglia F, Pagliari L, Tredici IG, Rotiroti N |
| 403 - 409 |
Morphology-controlled fabrication and magnetic properties of nickel assemblies
Li XA, Wang CS, Han XJ |
| 410 - 422 |
Inhomogeneity, anisotropy, and size effect in the interfacial energy of Ca(OH)(2) hexagonal-prism shaped nanocrystals in water
Harutyunyan VS |
| 423 - 432 |
Role of additives; sodium dodecyl sulphate and manganese chloride on morphology of Zn1-xMnxO nanoparticles and their photoluminescence properties
Pandey G, Dixit S, Shrivastava AK |
| 433 - 438 |
Synthesis and characterization of pure, urea and thiourea doped organic NLO L-arginine trifluoroacetate single crystals
Prasanyaa T, Haris M, Mathivanan V, Senthilkumar M, Mahalingam T, Jayaramakrishnan V |
| 439 - 442 |
Characterization of CuInTe2 crystals
Mobarak M, Shaban HT |
| 443 - 451 |
Shape and size-controlled synthesis of Ni Zn ferrite nanoparticles by two different routes
Abbas M, Rao BP, Kim C |
| 452 - 460 |
Fast and simultaneous growth of graphene, intermetallic compounds, and silicate on Cu-Ni alloy foils
Lee WG, Kim E, Jung J |
| 461 - 468 |
Investigation and characterization of the nanoscale precipitation sequence and their kinetics in Al-1.0% Mg2Si-0.4 wt% Si-0.5Cu (wt%) alloy
Ali AM, Gaber AF, Matsuda K, Ikeno S |
| 469 - 475 |
Optical absorption, P-31 NMR, and photoluminescence spectroscopy study of copper and tin co-doped barium-phosphate glasses
Jimenez JA, Zhao C |
| 476 - 482 |
Optoelectronic properties of a perylene substituted (cholesteryl) benzoateethynylene co-polymer
Zappia S, de Leon A, Alloisio M, Arias E, Dellepiane G, Petrillo G, Moggio I, Thea S, Gallardo-Vega C, Rodriguez M |
| 483 - 487 |
Identification of the partitioning characteristics of refractory elements in sigma and gamma phases of Ni-based single crystal superalloys based on first principles
Sun F, Mao SC, Zhang JX |
| 488 - 491 |
Study of electron vibrational interaction parameters in chlorophosphate activated with Eu2+ ion
Bhoyar PD, Dhoble SJ |
| 492 - 495 |
The chromium site in doped glassy lithium tetraborate
Kelly TD, Echeverria E, Beniwal S, Adamiv VT, Burak YV, Enders A, Petrosky JC, McClory JW, Dowben PA |
| 496 - 503 |
Synthesis of hybrid Au-ZnO nanoparticles using a one pot polyol process
Mezni A, Mlayah A, Serin V, Smiri LS |
| 504 - 513 |
First-principle calculations on CO oxidation catalyzed by subnanometer AlAun clusters
Guo L, Yang YF, Wen CX, Dong XN, Ren NN, Niu SS |
| 514 - 520 |
Energy transfer between lead sulfide quantum dots in the liquid phase
Das A, Hall E, Wai CM |
| 521 - 527 |
Synthesis of bridged beta-cyclodextrin-polyethylene glycol and evaluation of its inhibition performance in oilfield wastewater
Zou CJ, Liu Y, Yan XL, Qin YB, Wang M, Zhou L |
| 528 - 534 |
Chemically activated graphene/porous Si@SiOx composite as anode for lithium ion batteries
Tao HC, Yang XL, Zhang LL, Ni SB |
| 535 - 539 |
Effect of sintering aid on microwave dielectric behaviors of Ni0.5Ti0.5NbO4 ceramics for LTCC applications
Tseng CF, Chen CC, Lin CW |
| 540 - 544 |
Doping strontium in tricalcium phosphate microspheres using yeast-based biotemplate
Huang MJ, Li TJ, Zhao NR, Yao YC, Yang H, Du C, Wang YJ |
| 545 - 549 |
Structure and properties of Ge-Sb-S-CsCl glass-ceramics
Yang XY, Wang RP, Yang ZY, Xu SW |
| 550 - 556 |
Properties of polyacrylic acid-coated silver nanoparticle ink for inkjet printing conductive tracks on paper with high conductivity
Huang QJ, Shen WF, Xu QS, Tan RQ, Song WJ |
| 557 - 562 |
MgH2 + FeNb nanocomposites for hydrogen storage
Santos SF, Ishikawa TT, Botta WJ, Huot J |
| 563 - 571 |
Synthesis of sub-5 nm Co-doped SnO2 nanoparticles and their structural, microstructural, optical and photocatalytic properties
Entradas T, Cabrita JF, Dalui S, Nunes MR, Monteiro OC, Silvestre AJ |
| 572 - 582 |
Experimental and theoretical investigations on the inhibition of mild steel corrosion in the ground water medium using newly synthesised bipodal and tripodal imidazole derivatives
Gopi D, Sherif EM, Surendiran M, Jothi M, Kumaradhas P, Kavitha L |
| 583 - 593 |
Organosulfonic acid-functionalized mesoporous composites based on natural rubber and hexagonal mesoporous silica
Nuntang S, Poompradub S, Butnark S, Yokoi T, Tatsumi T, Ngamcharussrivichai C |
| 594 - 603 |
Precipitation based synthesis and luminescence of Ln(3+) (Eu, Ce, Dy, Sm, Tb) activated BaCa2Si3O9-Walstromite cyclosilicate phosphors
Raut SK, Dhoble NS, Park K, Dhoble SJ |
| 604 - 610 |
Preparation of monodisperse Ni nanoparticles and their assembly into 3D nanoparticle superlattices
Li M, Chen YZ, Ji N, Zeng DQ, Peng DL |
| 611 - 616 |
New manganese (II) structures derived from 2,6-dichlorobenzoic acid: Syntheses, crystal structures and magnetism
Esteves D, Tedesco JCD, Pedro SS, Cruz C, Reis MS, Brandao P |
| 617 - 622 |
Spin states and glassy magnetism in LaCo1-xNixO3 (0 <= x <= 0.5)
Kumar V, Kumar R, Shukla DK, Arora SK, Shvets IV, Singh K, Kumar R |
| 623 - 628 |
Effect of microwave remote plasma and radiofrequency plasma on the photoluminescence of (0001) epitaxial ZnO films
Margueron S, Ropers S, Maertens A, Legrani O, Genty F, Bartasyte A, Belmonte T |
| 629 - 635 |
Mechanochemical decomposition of Ag and Ni oxalates
Delogu F |
| 636 - 643 |
Nanostructure and mechanical properties of aromatic polyamide and reactive organoclay nanocomposites
Alvi MU, Zulfiqar S, Yavuz CT, Kweon HS, Sarwar MI |
| 644 - 648 |
Structural nature of Li-7 and B-11 sites in the nonlinear optical material LiB3O5 using static NMR and MAS NMR
Lim AR, Yoon CS |
| 649 - 660 |
A comprehensive study of soft magnetic materials based on FeSi spheres and polymeric resin modified by silica nanorods
Streckova M, Fuzer J, Kobera L, Brus J, Faberova M, Bures R, Kollar P, Lauda M, Medvecky L, Girman V, Hadraba H, Bat'kova M, Bat'ko I |
| 661 - 672 |
The effect of Pt nanoparticles loading on H-2 sensing properties of flame-spray-made SnO2 sensing films
Liewhiran C, Tamaekong N, Tuantranont A, Wisitsoraat A, Phanichphant S |
| 673 - 683 |
Preparation and surface properties of mesoporous silica particles modified with poly(N-vinyl-2-pyrrolidone) as a potential adsorbent for bilirubin removal
Timin A, Rumyantsev E, Lanin SN, Rychkova SA, Guseynov SS, Solomonov AV, Antina EV |
| 684 - 690 |
Effect of TiCl4 concentration on the structure of its aqueous solutions and on the properties and photoactivity of derived nanocrystalline titania
Wang LW, Egerton TA |
| 691 - 700 |
Synthesis of micro-sized hierarchical TiO2 particles of nano-scale effectiveness and their photocatalytic activities at various surface hydroxyl concentrations
Jang I, Park JH, Song K, Kim L, Lee Y, Oh SG |
| 701 - 706 |
Enhancing the thermal conductivity of n-eicosane/silica phase change materials by reduced graphene oxide
Wang W, Wang CY, Wang T, Li W, Chen LJ, Zou RG, Zheng J, Li XG |
| 707 - 714 |
H2S sensors based on SnO2 films: RGTO verses RF sputtering
Kaur M, Ramgir NS, Gautam UK, Ganapathi SK, Bhattacharya S, Datta N, Saxena V, Debnath AK, Aswal DK, Gupta SK |
| 715 - 721 |
Structural and photoluminescence properties of Tb-doped CaMoO4 nanoparticles with sequential surface coatings
Ansari AA, Parchur AK, Alam M, Azzeer A |
| 722 - 727 |
Effect of the type of Pt precursor on Pt-Ni nanostructures for electro-oxidation of ammonia
Kim H, Won D, Lee HK, Yoo SJ, Nahm KS, Kim P |
| 728 - 734 |
Low-temperature sintered ZnNb2O6-CaTiO3 ceramics with near-zero tau(f)
Guo M, Li YX, Dou G, Gong SP |
| 735 - 743 |
Molten salt solvent synthesis of La2Mo2O9 nano-wires by controlling the subsequent calcinations process
Li BR, Yang Y |
| 744 - 750 |
Synthesis and characterization of conductive copper-based metal-organic framework/graphene-like composites
Alfe M, Gargiulo V, Lisi L, Di Capua R |
| 751 - 760 |
Unusual broadening of the NIR luminescence of Er3+-doped Nb2O5 nanocrystals embedded in silica host: Preparation and their structural and spectroscopic study for photonics applications
Aquino FT, Pereira RR, Ferrari JL, Ribeiro SJL, Ferrier A, Goldner P, Goncalves RR |
| 761 - 771 |
Facile synthesis of luminescent TiO2 nanorods using an anionic surfactant: Their photosensitization and photocatalytic efficiency
Biswas S, Sundstrom V, De S |
| 772 - 776 |
Persistent luminescence of SrAl2O4: Eu2+, Dy3+, Cr3+ phosphors in the tissue transparency window
Teng Y, Zhou JJ, Khisro SN, Zhou SF, Qiu JR |
| 777 - 782 |
Luminescent and thermal properties of a novel red-emitting silicon fluoride acrylate-Eu(III) copolymer for white LEDs
Hu J, Xu L, Xu L, Tsuboi T, Huang W, Xie HD |
| 783 - 787 |
Na effect on flexible Cu(In,Ga)Se-2 photovoltaic cell depending on diffusion barriers (SiOx, i-ZnO) on stainless steel
Lee WJ, Cho DH, Wi JH, Han WS, Kim J, Chung YD |
| 788 - 795 |
Controlled morphology of ZnO nanostructures by adjusting the zinc foil heating temperature in an air-filled box furnace
Huang YM, Ma QL, Zhai BG |
| 796 - 803 |
Black nanocrystalline cubic zirconia: Manganese-stabilized c-ZrO2 prepared via the sol-gel method
Fernandez-Osorio A, Ramos-Olmos L, Julian CF |
| 804 - 814 |
Chemical stability and electrical properties of BaCe0.85Y0.15O3-delta-Ce0.85Y0.15O2-delta composite bulk samples for use as central membrane materials in dual PCFC-SOFC fuel cells
Gawel R, Przybylski K, Viviani M |
| 815 - 822 |
Sintering of nanoscale silver coated textiles, a new approach to attain conductive fabrics for electromagnetic shielding
Kardarian K, Busani T, Osorio I, Domingos H, Igreja R, Franco R, Cortez J |
| 823 - 830 |
(Fe,Cr)(7)C-3/Fe surface gradient composite: Microstructure, microhardness, and wear resistance
Ye FX, Hojamberdiev M, Xu YH, Zhong LS, Yan HH, Chen Z |
| 831 - 835 |
Synthesis and VUV luminescent properties of LaPO4:Eu3+ nanowires
Wang D, Shun Q, Wang YH, Zhang ZY |
| 836 - 842 |
Sonochemical synthesis, characterization, and electrochemical properties of MnMoO4 nanorods for supercapacitor applications
Veerasubramani GK, Krishnamoorthy K, Sivaprakasam R, Kim SJ |
| 843 - 849 |
Enhanced effect of dopant on polyaniline nanofiber based electrorheological response
Liu YD, Kim HY, Kim JE, Kim IG, Choi HJ, Park SJ |
| 850 - 859 |
Formation of friction layer of Ni3Al matrix composites with micro- and nano-structure during sliding friction under different loads
Zhai WZ, Shi XL, Xu ZS, Zhang QX |
| 860 - 866 |
Enhanced near-infrared quantum cutting in CaMoO4:Yb3+ phosphors induced by doping with Li+ ions for improving solar cells efficiency
Li L, Zhou XJ, Wei XT, Ma CG, Brik MG |
| 867 - 877 |
Poly (3,4-ethylenedioxythiophene) (PEDOT) and poly (3,4-ethylenedioxythiophene)-few walled carbon nanotube (PEDOT-FWCNT) nanocomposite based thin films for Schottky diode application
Gupta B, Mehta M, Melvin A, Kamalakannan R, Dash S, Kamruddin M, Tyagi AK |
| 878 - 883 |
Corrosion behavior of leaded-bronze alloys in sea water
Zohdy KM, Sadawy MM, Ghanem M |
| 884 - 894 |
Assessing changes on poly(ethylene terephthalate) properties after recycling: Mechanical recycling in laboratory versus postconsumer recycled material
Lopez MDC, Pernas AIA, Lopez MJA, Latorre AL, Vilarino JML, Rodriguez MVG |
| 895 - 907 |
Interface control of atomic layer deposited oxide coatings by filtered cathodic arc deposited sublayers for improved corrosion protection
Harkonen E, Tervakangas S, Kolehmainen J, Diaz B, Swiatowska J, Maurice V, Seyeux A, Marcus P, Fenker M, Toth L, Radnoczi G, Ritala M |
| 908 - 914 |
The electrical transport properties of nitrogen doped carbon microspheres
Wright WP, Marsicano VD, Keartland JM, Erasmus RM, Dube SMA, Coville NJ |
| 915 - 919 |
Magnetic properties and methylene blue adsorptive performance of CoFe2O4/activated carbon nanocomposites
Xu JC, Xin PH, Gao YQ, Hong B, Jin HX, Jin DF, Peng XL, Li J, Gong J, Ge HL, Wang XQ |
| 920 - 924 |
Phenomenological understanding of dewetting and embedding of noble metal nanoparticles in thin films induced by ion irradiation
Prakash J, Tripathi A, Gautam S, Chae KH, Song J, Rigato V, Tripathi J, Asokan K |
| 925 - 933 |
Effect of the Ti/B4C mole ratio on the reaction products and reaction mechanism in an Al-Ti-B4C powder mixture
Zhang JJ, Lee JM, Cho YH, Kim SH, Yu HS |
| 934 - 941 |
Molecular interactions and antimicrobial activity of curcumin (Curcuma longa) loaded polyacrylonitrile films
Govindaraj P, Kandasubramanian B, Kodam KM |
| 942 - 953 |
Nonisothermal crystallization behavior and mechanical properties of PEEK/SCF/nano-SiO2 composites
Sattari M, Molazemhosseini A, Naimi-Jamal MR, Khavandi A |
| 954 - 962 |
Adsorptive properties of sol-gel derived hybrid organic/inorganic coatings
Borovin E, Callone E, Ceccato R, Quaranta A, Dire S |
| 963 - 967 |
Hydrothermal synthesis of two photoluminescent nitrogen-doped graphene quantum dots emitted green and khaki luminescence
Zhu XH, Zuo XX, Hu RP, Xiao X, Liang Y, Nan JM |
| 968 - 973 |
Dependence of optical properties on the composition of (Ba1-x-ySrxEuy)Si2O2N2 phosphors for white light emitting diodes
Zhang M, He X, Luo JY, Zeng QG |
| 974 - 981 |
Study of the growth, and effects of filament to substrate distance on the structural and optical properties of Si/SiC core-shell nanowires synthesized by hot-wire chemical vapor deposition
Goh BT, Rahman SA |
| 982 - 986 |
Improvement of corrosion resistance of Cu and Nb co-added Nd-Fe-B sintered magnets
Zhang P, Ma TY, Liang LP, Yan M |
| 987 - 995 |
Influence of thermal annealing on microstructural, morphological, optical properties and surface electronic structure of copper oxide thin films
Akgul FA, Akgul G, Yildirim N, Unalan HE, Turan R |
| 996 - 1002 |
The preparation, characterization and optical properties of Cd2V2O7 and CdCO3 compounds
Huang P, Zhang X, Wei JM, Pan JQ, Sheng YZ, Feng BX |
| 1003 - 1008 |
Preparation of granular X-type zeolite/activated carbon composite from elutrilithe by adding pitch and solid SiO2
Li ZL, Cui XY, Ma JH, Chen WP, Gao W, Li RF |
| 1009 - 1015 |
A complex and de-complex strategy to ordered mesoporous Ce0.5Zr0.5O2 with comprehensive pilot scale performances
Ouyang J, Jin J, Yang HM, Tang AD |
| 1016 - 1021 |
Coupling of conductivity to the relaxation process in polymer electrolytes
Pradhan DK, Karan NK, Thomas R, Katiyar RS |
| 1022 - 1028 |
Thermoelectric properties of Zn doped Cu2SnSe3
Raju C, Falmbigl M, Rogl P, Heinrich P, Royanian E, Bauer E, Mallik RC |
| 1029 - 1036 |
Designing dual phase sensing materials from polyaniline filled styrene-isoprene-styrene composites
Sadasivuni KK, Ponnamma D, Kasak P, Krupa I, Al-Maadeed MASA |
| 1037 - 1041 |
Morphological and magnetic properties of the hydrothermally prepared alpha-Fe2O3 nanorods
Hadia NMA, Garcia-Granda S, Garcia JR, Martinez-Blanco D, Mohamed SH |
| 1042 - 1048 |
Characterizations of electrodeposited Ni-CeO2 nanocomposite coatings
Kasturibai S, Kalaignan GP |
| 1049 - 1057 |
Structural and electrochemical properties of multifunctional silica/lignin materials
Jesionowski T, Klapiszewski L, Milczarek G |
| 1058 - 1067 |
Ethyl acetoacetate ligand distribution in the course of titanium n-butoxide chelation
Kurajica S, Skoric I, Lozic I, Mandic V |
| 1068 - 1073 |
Structure and electronic properties of transition metal dichalcogenide MX2 (M = Mo, W, Nb; X = S, Se) monolayers with grain boundaries
Wang ZG, Su QL, Yin GQ, Shi JJ, Deng HQ, Guan J, Wu MP, Zhou YL, Lou HL, Fu YQ |
| 1074 - 1078 |
Electrochemistry of Cu(I) doped CdS nanoparticles hosted by DNA-CTMA in aqueous electrolyte
Yang CH, Tang AW, Li X, Zhang FJ, Teng F |
| 1079 - 1091 |
Microstructure, physical and chemical properties of nanostructured (Ti-Hf-Zr-V-Nb)N coatings under different deposition conditions
Pogrebnjak AD, Yakushchenko IV, Bagdasaryan AA, Bondar OV, Krause-Rehberg R, Abadias G, Chartier P, Oyoshi K, Takeda Y, Beresnev VM, Sobol OV |
| 1092 - 1098 |
The effect of annealing on the electronic stability of an amorphous Zr70Pd30 alloy
Antipas GSE, Karalis K |
| 1099 - 1109 |
Effect of partial crystallization on the thermal, optical, structural and Er3+ luminescence properties of silicate glasses
Massera J, Sevrette B, Petit L, Koponen J, Torngren B, Glorieux B, Hupa L, Hupa M |
| 1110 - 1116 |
Novel precursors for anatase nanorods and their application in DSSCs
Mishra B, Agarkar S, Khushalani D |
| 1117 - 1122 |
Effect of Si content on electrophysical properties of Si-polymer composite varistors
Ghafouri M, Parhizkar M, Bidadi H, Aref SM, Olad A |
| 1123 - 1133 |
Aging of medium strength aluminum alloy friction stir welds produced by different process parameter after tensile strain hardening
Cerri E, Leo P |
| 1134 - 1139 |
Facet-dependent optical properties of nanostructured ZnO
Wang L, Li HB, Xu SL, Yue QL, Liu JF |
| 1140 - 1145 |
Enhanced photovoltaic effect of ruthenium complex-modified graphene oxide with P-type conductivity
Zhang W, Bai HC, Zhang Y, Sun Y, Lin S, Liu J, Yang Q, Song XM |
| 1146 - 1156 |
Photodegradation of organic dyes with anatase TiO2 nanoparticles-loaded BiOCl nanosheets with exposed {001} facets under simulated solar light
Zhu GQ, Hojamberdiev M, Tan CW, Jin L, Xu C, Liu Y, Liu P, Zhou JP |
| 1157 - 1164 |
Lanthanide tetrakis-beta-diketonate dimers for solution-processed OLEDs
Martins JP, Martin-Ramos P, Coya C, Alvarez AL, Pereira LC, Diaz R, Martin-Gil J, Silva MR |
| 1165 - 1170 |
The xGa(2)O(3)-(100-x)NaPO3 glass system: Preparation, properties and structural analysis by solid state NMR
Caron A, Doumert B, Tricot G |
| 1171 - 1174 |
Conductivity enhancement of stretchable PEDOT:PSS nanowire interconnect fabricated by fountain-pen lithography
Kim JH, Chang WS, Kim D, Cho SH, Seol SK |
| 1175 - 1182 |
Structure of heat-treated mesoporous carbon and its electrochemical lithium intercalation behavior
Tsumura T, Arikawa A, Kinumoto T, Arai Y, Morishita T, Orikasa H, Inagaki M, Toyoda M |
| 1183 - 1190 |
Enhanced magnetodielectric effect and optical property of lead-free multiferroic (1-x)(Bi0.5Na0.5)TiO3/xCoFe(2)O(4) composites
Rani J, Yadav KL, Prakash S |
| 1191 - 1194 |
Synthesis and luminescence properties of Li2O-Y2O3-TeO2:Eu3+ tellurite glass
Atuchin VV, Yelisseyev AP, Galashov EN, Molokeev MS |
| 1195 - 1203 |
Ortho-vanadates K3RE(VO4)(2) (RE = La, Pr, Eu, Gd, Dy, Y) for near UV-converted phosphors
Qin L, Wei DL, Huang YL, Qin CX, Cai P, Kim SI, Seo HJ |
| 1204 - 1209 |
Hydrophilic Cu2O nanostructured thin films prepared by facile spin coating method: Investigation of surface energy and roughness
Eskandari A, Sangpour P, Vaezi MR |
