1 - 13 |
Definition of occupant behavior in residential buildings and its application to behavior analysis in case studies Chen SQ, Yang WW, Yoshino H, Levine MD, Newhouse K, Hinge A |
14 - 24 |
Enhancing energy efficiency and technical and marketing tools to change people's habits in the long-term Guerassimoff G, Thomas J |
25 - 35 |
Finite volume and response surface methodology based performance prediction and optimization of a hybrid earth to air tunnel heat exchanger Kaushal M, Dhiman P, Singh S, Patel H |
36 - 46 |
The applicability of the wall implanted with heat pipes in winter of China Sun ZJ, Zhang ZG, Duan CX |
47 - 56 |
A hybrid predictive control approach for the management of an energy production-consumption system applied to a TRNSYS solar absorption cooling system for thermal comfort in buildings Herrera E, Bourdais R, Gueguen H |
57 - 64 |
A new method for the thermal characterization of transparent and semi-transparent materials using outdoor measurements and dynamic simulation Cornaro C, Bucci F, Pierro M, Bonadonna ME, Siniscalco G |
65 - 72 |
Energy retrofit techniques: An experimental study of two typical school buildings in Tehran Tahsildoost M, Zomorodian ZS |
73 - 86 |
A case study on the individual energy use of personal computers in an office setting and assessment of various feedback types toward energy savings Kamilaris A, Neovino J, Kondepudi S, Kalluri B |
87 - 96 |
Thermal performance of a conic basket heat exchanger coupled to a geothermal heat pump for greenhouse cooling under Tunisian climate Boughanmi H, Lazaar M, Bouadila S, Farhat A |
97 - 107 |
A simplified mathematical model for transient simulation of thermal performance and energy assessment for active facades Elarga H, De Carli M, Zarrella A |
108 - 121 |
U-value in situ measurement for energy diagnosis of existing buildings Ficco G, Iannetta F, Ianniello E, Alfano FRD, Dell'Isola M |
122 - 130 |
Long term experimental evaluation of the influence of heat cost allocators on energy consumption in a multifamily building Cholewa T, Sitita-Olcha A |
131 - 138 |
On the feasibility of providing power system spinning reserves from thermal storage Palacio SN, Kircher KJ, Zhang KM |
139 - 146 |
Thermal conductivity of unfired earth bricks reinforced by agricultural wastes with cement and gypsum Ashour T, Korjenic A, Korjenic S, Wu W |
147 - 155 |
Inverse design of the thermal environment in an airliner cabin by use of the CFD-based adjoint method Liu W, Duan R, Chen C, Lin CH, Chen QY |
156 - 164 |
New thermal parameters identification approach applied to the thermal renovation of buildings Bouache T, Limam K, Bosschaerts W |
165 - 180 |
Smart residential load reduction via fuzzy logic, wireless sensors, and smart grid incentives Keshtkar A, Arzanpour S, Keshtkar F, Ahmadi P |
181 - 190 |
Influence of dust accumulation on building roof thermal performance and radiant heat gain in hot-dry climates Algarni S, Nutter D |
191 - 198 |
An analysis of occupants response to thermal discomfort in green and conventional buildings in New Zealand Azizi NSM, Wilkinson S, Fassman E |
199 - 207 |
Numerical simulation of airflow and temperature fields around an occupant in indoor environment Taghinia J, Rahman MM, Siikonen T |
208 - 214 |
Intelligent forecasting of residential heating demand for the District Heating System based on the monthly overall natural gas consumption Izadyar N, Ong HC, Shamshirband S, Ghadamian H, Tong CW |
215 - 232 |
Heat exchanger applications in wastewater source heat pumps for buildings: A key review Culha O, Gunerhan H, Biyik E, Ekren O, Hepbasli A |
233 - 243 |
Using footwarmers in offices for thermal comfort and energy savings Zhang H, Arens E, Taub M, Dickerhoff D, Bauman F, Fountain M, Pasut W, Fannon D, Zhai YC, Pigman M |
244 - 249 |
Preparation and properties of lauric acid/diatomite composites as novel form-stable phase change materials for thermal energy storage Fu XW, Liu ZM, Xiao Y, Wang JL, Lei JX |
250 - 263 |
Life cycle assessment and life cycle cost implications for roofing and floor designs in residential buildings Islam H, Jollands M, Setunge S, Haque N, Bhuiyan MA |
264 - 274 |
Evaluation of the most influential parameters of heat load in district heating systems Petkovic D, Protic M, Shamshirband S, Akib S, Raos M, Markovic D |
275 - 286 |
Experimental analysis of thermal interaction between wine cellar and underground Tinti F, Barbaresi A, Benni S, Torreggiani D, Bruno R, Tassinari P |
287 - 301 |
Development of a systematic model for an assessment tool for sustainable buildings based on a structural framework Kang HJ |
302 - 315 |
Energy conservation benefit of water-side free cooling in a liquid desiccant and evaporative cooling-assisted 100% outdoor air system Kim MH, Park JY, Ham SW, Jeong JW |
316 - 322 |
Experimental study on the physical-mechanical durability of innovative hemp-based composites for the building industry Sassoni E, Manzi S, Motori A, Montecchi M, Canti M |
323 - 335 |
Improving the performance of Ground Coupled Heat Exchangers in unsaturated soils Platts AB, Cameron DA, Ward J |
336 - 349 |
Optimizing structural roof form for life-cycle energy efficiency Huberman N, Pearlmutter D, Gal E, Meir IA |
350 - 359 |
The use of adaptive thermal comfort models to evaluate the summer performance of a Mediterranean earth building Desogus G, Di Benedetto S, Ricciu R |
360 - 368 |
Experimental study on the building evaporative cooling by using the Climatic Wind Tunnel Zhang L, Feng YS, Meng QL, Zhang Y |
369 - 377 |
Smart indoor lighting systems with luminaire-based sensing: A review of lighting control approaches Pandharipande A, Caicedo D |
378 - 394 |
Multi-objective optimization of a nearly zero-energy building based on thermal and visual discomfort minimization using a non-dominated sorting genetic algorithm (NSGA-II) Carlucci S, Cattarin G, Causone F, Pagliano L |
395 - 404 |
The thermal behavior of Trombe wall system with venetian blind: An experimental and numerical study He W, Hu ZT, Luo BQ, Hong XQ, Sun W, Ji J |